[U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23

[Hans de Goede]

Hi,

On 29-12-14 14:50, Ian Campbell wrote:
> On Wed, 2014-12-24 at 20:06 +0100, Hans de Goede wrote:
>
> You've got three p's in suppport in the subject.
>
>> Some SoCs, specifically the A13 (sun5i variant) and the A23 (sun8i) only have
>> lcd output support.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>>   board/sunxi/Kconfig           |  7 +++++++
>>   drivers/video/sunxi_display.c | 30 ++++++++++++++++++++++++++----
>>   2 files changed, 33 insertions(+), 4 deletions(-)
>>
>> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
>> index 35c59e9..7a8503b 100644
>> --- a/board/sunxi/Kconfig
>> +++ b/board/sunxi/Kconfig
>> @@ -246,6 +246,13 @@ config VIDEO
>>   	or VGA output found on most sunxi devices. See doc/README.video for
>>   	info on how to select the video output and mode.
>>
>> +config VIDEO_HDMI
>> +	boolean "HDMI output support"
>> +	depends on VIDEO && !MACH_SUN8I
>
> There is no "&& !MACH_SUN5I" here because there are sun5i variants other
> than the A13 which do have HDMI, correct?

Correct, the A10s has HDMI out support.

>> @@ -278,7 +282,7 @@ static void sunxi_composer_init(void)
>>   		(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
>>   	int i;
>>
>> -#ifdef CONFIG_MACH_SUN6I
>> +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
>
> These seem a bit odd. If the sun8i has no HDMI why are we messing with
> the reset bits? (Or at least, why is such messing new in this particular
> patch).
>
> I think perhaps rather than "disabling the non-existent HDMI on sun8i"
> which is how I read the patch description I should have read "enable
> video on sun8i, which supports LCD but not HDMI"?

Yeah that is better, I'll do a v2 with the commit message fixed.

Regards,

Hans