[U-Boot] [PATCH 10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23

[Ian Campbell]

On Wed, 2014-12-24 at 20:06 +0100, Hans de Goede wrote:

You've got three p's in suppport in the subject.

> Some SoCs, specifically the A13 (sun5i variant) and the A23 (sun8i) only have
> lcd output support.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  board/sunxi/Kconfig           |  7 +++++++
>  drivers/video/sunxi_display.c | 30 ++++++++++++++++++++++++++----
>  2 files changed, 33 insertions(+), 4 deletions(-)
> 
> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> index 35c59e9..7a8503b 100644
> --- a/board/sunxi/Kconfig
> +++ b/board/sunxi/Kconfig
> @@ -246,6 +246,13 @@ config VIDEO
>  	or VGA output found on most sunxi devices. See doc/README.video for
>  	info on how to select the video output and mode.
>  
> +config VIDEO_HDMI
> +	boolean "HDMI output support"
> +	depends on VIDEO && !MACH_SUN8I

There is no "&& !MACH_SUN5I" here because there are sun5i variants other
than the A13 which do have HDMI, correct?

> @@ -278,7 +282,7 @@ static void sunxi_composer_init(void)
>  		(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
>  	int i;
>  
> -#ifdef CONFIG_MACH_SUN6I
> +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I

These seem a bit odd. If the sun8i has no HDMI why are we messing with
the reset bits? (Or at least, why is such messing new in this particular
patch).

I think perhaps rather than "disabling the non-existent HDMI on sun8i"
which is how I read the patch description I should have read "enable
video on sun8i, which supports LCD but not HDMI"?

Ian.