[U-Boot] [PATCH][v2] powerpc/t104xrdb: Add basic ethernet support

York Sun yorksun at freescale.com
Mon Feb 3 21:17:24 CET 2014


On 01/29/2014 10:00 PM, Priyanka Jain wrote:
> This covers only non-L2 switch ethernet interfaces i.e.
> RGMII and SGMII interface for both 
> -T1040RDB
> -T1042RDB_PI
> 
> T1040RDB is configured as serdes protocol 0x66 which can
> support following interfaces
> -2 RGMIIS on DTSEC4, DTSEC5
> -1 SGMII on DTSEC3
> 
> T1042RDB_PI is configured as serdes protocol 0x06 which can
> support following interfaces
> -2 RGMIIS on DTSEC4, DTSEC5
> 
> 
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> Changes for v2:
>  Initialized phy_addr to remove compilation warning.
> 
>

Applied to u-boot-mpc85xx master branch.

York





More information about the U-Boot mailing list