February 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Feb 1 00:24:37 CET 2014
Ending: Fri Feb 28 22:51:13 CET 2014
Messages: 2176

• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Wolfgang Denk
  • [U-Boot] [PATCH v2] tools: correct proftool build rule   Ian Campbell
  • [U-Boot] [PATCH v2] tools: correct proftool build rule   Simon Glass
  • [U-Boot] [U-Boot,v2] tools: correct proftool build rule   Tom Rini
  • [U-Boot] [PATCH V3 04/12] cmd_test: use table lookup for parsing   Simon Glass
    • [U-Boot] [PATCH V3 04/12] cmd_test: use table lookup for parsing   Stephen Warren
      • [U-Boot] [PATCH V3 04/12] cmd_test: use table lookup for parsing   Simon Glass
• [U-Boot] [PATCH V3 08/12] cmd_test: implement -e test for file existence   Simon Glass
  • [U-Boot] [PATCH V3 10/12] sandbox: enable CONFIG_CMD_FS_GENERIC   Simon Glass
• [U-Boot] [PATCH V3 12/12] fat: implement exists() for FAT fs   Simon Glass
• [U-Boot] u-boot spl with FIT images   Simon Glass
  • [U-Boot] u-boot spl with FIT images   Michal Simek
    • [U-Boot] u-boot spl with FIT images   Simon Glass
• [U-Boot] Uboot can't load kernel.. Bad data CRC   Riccardo Giuliacci
• [U-Boot] [PATCH 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Marek Vasut
  • [U-Boot] [PATCH 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Lukasz Majewski
• [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Marek Vasut
  • [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Lukasz Majewski
    • [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Marek Vasut
      • [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Marek Vasut
      • [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Lukasz Majewski
• [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Marek Vasut
  • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
    • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Marek Vasut
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Marek Vasut
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Marek Vasut
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
      • [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Marek Vasut
  • [U-Boot] uboot post for arm   shobin b
    • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
• [U-Boot] [U-boot isn't booting from uSD]   Devarsh gadhia
  • [U-Boot] [U-boot isn't booting from uSD]   Tom Rini
• [U-Boot] [PATCH] omap3: Derive config for Beagleboard-XM sans NAND support   Sanjeev Premi
  • [U-Boot] [PATCH 0/2] IMX6: Add Gateworks Ventana support   Tim Harvey
  • [U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver   Tim Harvey
  • [U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver   Stefano Babic
  • [U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver   Tim Harvey
  • [U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver   Stefano Babic
  • [U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver   Michael Trimarchi
  • [U-Boot] [PATCH 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
  • [U-Boot] [PATCH 2/2] ventana: Add Gateworks Ventana family support   Stefano Babic
  • [U-Boot] [PATCH 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
• [U-Boot] [PATCH] OMAP24xx I2C: Add support for 'setspeed'   Hannes Petermaier
  • [U-Boot] [PATCH] OMAP24xx I2C: Add support for 'setspeed'   Wolfgang Denk
  • [PATCH 2/2] OMAP24xx I2C: Add support for 'set-speed' Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>   Hannes Petermaier
    • [U-Boot] [PATCH 1/2] OMAP24xx I2C: Add support for 'setspeed'   Hannes Petermaier
• [U-Boot] Signed-off-by for RPI U-Boot USB patches   Stephen Warren
  • [U-Boot] Signed-off-by for RPI U-Boot USB patches   Greg KH
    • [U-Boot] Signed-off-by for RPI U-Boot USB patches   Oleksandr Tymoshenko
  • [U-Boot] Signed-off-by for RPI U-Boot USB patches   Lukasz Majewski
    • [U-Boot] Signed-off-by for RPI U-Boot USB patches   Stephen Warren
      • [U-Boot] Signed-off-by for RPI U-Boot USB patches   Lukasz Majewski
      • [U-Boot] [PATCH] Do not merge this to u-boot/master: disable fixdep   Masahiro Yamada
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Simon Glass
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Simon Glass
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Simon Glass
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers   Minkyu Kang
• [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function   Minkyu Kang
• [U-Boot] [PATCH v2 2/2] Powerpc/QE: Add QE support for T1040   Timur Tabi
• [U-Boot] [PATCH v6 00/11] Introduce Samsung misc file and LCD menu.   Minkyu Kang
• [U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings   Minkyu Kang
• [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Minkyu Kang
  • [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Rajeshwari Birje
• [U-Boot] [PATCH V5 5/6] exynos: Add a common DT based PMIC driver initialization   Minkyu Kang
  • [U-Boot] [PATCH v4 3/9] kmp204x: I2C deblocking support   Valentin Longchamp
  • [U-Boot] [PATCH v4 3/9] kmp204x: I2C deblocking support   York Sun
• [U-Boot] [PATCH] sandbox: Enable CONFIG_CMD_LZMADEC in sandbox.h   Patrice B
  • [U-Boot] [PATCH] sandbox: Enable CONFIG_CMD_LZMADEC in sandbox.h   Simon Glass
• [U-Boot] [PATCH V2 1/8] arm:exynos: add cpu revision   Minkyu Kang
  • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Aneesh Bansal
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Aneesh Bansal
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Wolfgang Denk
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Scott Wood
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Wolfgang Denk
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Scott Wood
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Scott Wood
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   aneesh.bansal at freescale.com
  • [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Scott Wood
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Jaehoon Chung
• [U-Boot] [PATCH] pci: mx6: Implement reset callback   Stefano Babic
  • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
    • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Eric Nelson
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Eric Nelson
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Eric Nelson
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Eric Nelson
      • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
    • [U-Boot] [PATCH] pci: mx6: Implement reset callback   Stefano Babic
      • [U-Boot] Booting in Internal mode   JYOTI DUBEY
      • [U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support   Dan Murphy
      • [U-Boot] [uBoot] [PATCH v2 2/2] ARM: O5/dra7xx: Add SATA boot support   Dan Murphy
      • [U-Boot] [uBoot] [PATCH v2 2/2] ARM: O5/dra7xx: Add SATA boot support   Roger Quadros
      • [U-Boot] [uBoot] [PATCH v2 2/2] ARM: O5/dra7xx: Add SATA boot support   Dan Murphy
      • [U-Boot] [U-Boot,v2,2/2] ARM: O5/dra7xx: Add SATA boot support   Tom Rini
      • [U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support   Roger Quadros
      • [U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support   Dan Murphy
      • [U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support   Roger Quadros
      • [U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support   Dan Murphy
      • [U-Boot] [U-Boot, v2, 1/2] common: spl: Add spl sata boot support   Tom Rini
• [U-Boot] [PATCH] fpga: zynqpl: Add support for zc7015 device   Michal Simek
  • [U-Boot] [PATCH v2] OMAP24xx I2C: Add support for 'setspeed'   Hannes Petermaier
  • [U-Boot] [PATCH v2] OMAP24xx: Add support for set-speed   Hannes Petermaier
  • [U-Boot] [PATCH v4] OMAP24xx I2C: Add support for set-speed   Hannes Petermaier
  • [U-Boot] [PATCH v2] OMAP24xx I2C: Add support for 'setspeed'   Wolfgang Denk
  • [U-Boot] [PATCH v3 0/9] Add support for the ARC700 architecture   Alexey Brodkin
  • [U-Boot] [PATCH v3 1/9] arc: add architecture header files   Alexey Brodkin
  • [U-Boot] [PATCH v3 2/9] arc: add cpu files   Alexey Brodkin
  • [U-Boot] [PATCH v3 3/9] arc: add library functions   Alexey Brodkin
  • [U-Boot] [PATCH v3 4/9] arc: bdinfo, image and arc-specific init functions declarations support   Alexey Brodkin
  • [U-Boot] [PATCH v3 5/9] arc: add support for standalone programs   Alexey Brodkin
  • [U-Boot] [PATCH v3 6/9] arc: add Arcangel4 board support   Alexey Brodkin
  • [U-Boot] [PATCH v3 6/9] arc: add Arcangel4 board support   Wolfgang Denk
  • [U-Boot] [PATCH v3 6/9] arc: add Arcangel4 board support   Alexey Brodkin
  • [U-Boot] [PATCH v3 6/9] arc: add Arcangel4 board support   Wolfgang Denk
  • [U-Boot] [PATCH v3 7/9] arc: add AXS101 board support   Alexey Brodkin
  • [U-Boot] [PATCH v3 7/9] arc: add AXS101 board support   Wolfgang Denk
  • [U-Boot] [PATCH v3 7/9] arc: add AXS101 board support   Alexey Brodkin
  • [U-Boot] [PATCH v3 7/9] arc: add AXS101 board support   Wolfgang Denk
  • [U-Boot] [PATCH v3 8/9] arc: add architecture to MAKEALL   Alexey Brodkin
  • [U-Boot] [PATCH v3 9/9] arc: add README for architecture   Alexey Brodkin
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH][v0] powerpc/mpc85xx: Update LIODNs for T1040   York Sun
• [U-Boot] [PATCH] driver/fsl_pci:Update print to display PCIe generation   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx:Fix README to show correct flash memory map   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Update serdes protocols for T1040   York Sun
• [U-Boot] [U-Boot, 2/2, v2] boards/t1040qds: Adds ethernet support for T1040   York Sun
• [U-Boot] [U-Boot, v2] powerpc/t104xrdb: Update T1040RDB.h in config folder   York Sun
• [U-Boot] [U-Boot, v2] powerpc/t104xrdb: Update T1042RDB.h in config folder   York Sun
• [U-Boot] powerpc/usb: Enable dual phy for T1040   York
• [U-Boot] [PATCH][v2] powerpc/t104xrdb: Add basic ethernet support   York Sun
• [U-Boot] powerpc/usb: Enable dual phy for T1040   York Sun
  • [U-Boot] [PATCH V4 01/12] fs: fix generic save command implementation   Stephen Warren
  • [U-Boot] [PATCH V4 02/12] fs: implement infrastructure for an 'exists' function   Stephen Warren
  • [U-Boot] [PATCH V4 02/12] fs: implement infrastructure for an 'exists' function   Tom Rini
  • [U-Boot] [PATCH V4 03/12] fs: don't pass NULL dev_desc to most filesystems   Stephen Warren
  • [U-Boot] [PATCH V4 03/12] fs: don't pass NULL dev_desc to most filesystems   Tom Rini
  • [U-Boot] [PATCH V4 04/12] cmd_test: use table lookup for parsing   Stephen Warren
  • [U-Boot] [PATCH V4 04/12] cmd_test: use table lookup for parsing   Tom Rini
  • [U-Boot] [PATCH V4 05/12] cmd_test: check for binary operators before unary   Stephen Warren
  • [U-Boot] [PATCH V4 05/12] cmd_test: check for binary operators before unary   Tom Rini
  • [U-Boot] [PATCH V4 06/12] cmd_test: implement ! on sub-expressions   Stephen Warren
  • [U-Boot] [PATCH V4 06/12] cmd_test: implement ! on sub-expressions   Tom Rini
  • [U-Boot] [PATCH V4 07/12] cmd_test: evaluate to false without any arguments   Stephen Warren
  • [U-Boot] [PATCH V4 07/12] cmd_test: evaluate to false without any arguments   Tom Rini
  • [U-Boot] [PATCH V4 08/12] cmd_test: implement -e test for file existence   Stephen Warren
  • [U-Boot] [PATCH V4 08/12] cmd_test: implement -e test for file existence   Tom Rini
  • [U-Boot] [PATCH V4 09/12] sandbox: implement exists() function   Stephen Warren
  • [U-Boot] [PATCH V4 09/12] sandbox: implement exists() function   Tom Rini
  • [U-Boot] [PATCH V4 10/12] sandbox: enable CONFIG_CMD_FS_GENERIC   Stephen Warren
  • [U-Boot] [PATCH V4 10/12] sandbox: enable CONFIG_CMD_FS_GENERIC   Tom Rini
  • [U-Boot] [PATCH V4 11/12] ext4: implement exists() for ext4fs   Stephen Warren
  • [U-Boot] [PATCH V4 11/12] ext4: implement exists() for ext4fs   Tom Rini
  • [U-Boot] [PATCH V4 12/12] fat: implement exists() for FAT fs   Stephen Warren
  • [U-Boot] [PATCH V4 12/12] fat: implement exists() for FAT fs   Tom Rini
  • [U-Boot] [PATCH V4 01/12] fs: fix generic save command implementation   Tom Rini
• [U-Boot] [PATCH v2 1/9] kmp204x: support for QRIO1 bootcounter   York Sun
• [U-Boot] [PATCH v2 2/9] kmp204x: introduce QRIO GPIO functions   York Sun
• [U-Boot] [PATCH v2 4/9] kmp204x: implement workaround for A-006559   York Sun
• [U-Boot] [PATCH v2 5/9] kmp204x: add support for the kmcoge4 board   York Sun
• [U-Boot] [PATCH v2 6/9] kmp204x: update I2C field of RCW   York Sun
  • [U-Boot] [PATCH 1/2] unit-test: fix 'env default' invocation   Stephen Warren
  • [U-Boot] [PATCH 2/2] unit-test: add lots of tests for the Hush 'test' command   Stephen Warren
  • [U-Boot] [PATCH 2/2] unit-test: add lots of tests for the Hush 'test' command   Tom Rini
  • [U-Boot] [PATCH 1/2] unit-test: fix 'env default' invocation   Tom Rini
• [U-Boot] [PATCH v2 7/9] KM: add the KM_UBI_PART_BOOT_OPTS #define   York Sun
• [U-Boot] [PATCH v2 8/9] kmp204x: enable support for SPANSION SPI NOR   York Sun
• [U-Boot] [PATCH v2 9/9] kmp204x: initial support for PCIe FPGA configuration   York Sun
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   York Sun
  • [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Scott Wood
    • [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   York Sun
      • [U-Boot] [PATCH V2] pci: mx6: Implement reset callback   Marek Vasut
      • [U-Boot] [PATCH V2] pci: mx6: Implement reset callback   Stefano Babic
      • [U-Boot] [PATCH v1 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
      • [U-Boot] [PATCH v1 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
      • [U-Boot] [PATCH v1 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
      • [U-Boot] [PATCH v1 3/6] gpio: kona: Add Kona gpio driver   Darwin Rambo
      • [U-Boot] [PATCH v1 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
      • [U-Boot] [PATCH v1 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
      • [U-Boot] [PATCH v1 5/6] mmc: kona: Add Kona mmc driver   Jaehoon Chung
      • [U-Boot] [PATCH v1 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
      • [U-Boot] [PATCH v1 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
      • [U-Boot] [PATCH v1 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
      • [U-Boot] [PATCH 1/4] ARM: tegra: move CONFIG_TEGRAnn   Stephen Warren
      • [U-Boot] [PATCH 2/4] ARM: tegra: fix pmc_pwrgate_timer_mult register definition   Stephen Warren
      • [U-Boot] [PATCH 4/4] ARM: tegra: simplify halt_avp()   Stephen Warren
      • [U-Boot] [PATCH 4/4] ARM: tegra: simplify halt_avp()   Stephen Warren
      • [U-Boot] [PATCH 3/4] ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124   Stephen Warren
      • [U-Boot] [PATCH 3/4] ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124   Tom Warren
      • [U-Boot] [PATCH 3/4] ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124   Stephen Warren
• [U-Boot] [PATCH] README: document CONFIG_CMD_FS_GENERIC   Stephen Warren
• [U-Boot] [PATCH 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Stephen Warren
• [U-Boot] [PATCH 2/2] config: add config_distro_defaults.h   Stephen Warren
  • [U-Boot] [PATCH v2 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
  • [U-Boot] [PATCH v2 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
  • [U-Boot] [PATCH v2 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
  • [U-Boot] [PATCH v2 3/6] gpio: kona: Add Kona gpio driver   Darwin Rambo
  • [U-Boot] [PATCH v2 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
  • [U-Boot] [PATCH v2 4/6] i2c: kona: Add Kona I2C driver   Heiko Schocher
  • [U-Boot] [PATCH v2 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
  • [U-Boot] [PATCH v2 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
  • [U-Boot] [PATCH v2 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
• [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
  • [U-Boot] [PATCH] Added 64-bit MMIO accessors for ARMv8   J. German Rivera
  • [U-Boot] [PATCH] Added 64-bit MMIO accessors for ARMv8   Albert ARIBAUD
• [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Jaehoon Chung
• [U-Boot] [PATCH v2 4/8] cmd_mmc.c: Change 'bootpart' code to match normal coding style   Jaehoon Chung
• [U-Boot] [PATCH v2 5/8] cmd_mmc.c: Rename 'bootpart' to 'bootpart-resize'   Jaehoon Chung
• [U-Boot] [PATCH v2 6/8] cmd_mmc.c: Add 'partconf' command to mmc   Jaehoon Chung
  • [U-Boot] [PATCH v2 6/8] cmd_mmc.c: Add 'partconf' command to mmc   Tom Rini
  • [U-Boot] [PATCH v2 6/8] cmd_mmc.c: Add 'partconf' command to mmc   Jaehoon Chung
• [U-Boot] [PATCH v2 7/8] cmd_mmc.c: Add bootbus mmc sub-command   Jaehoon Chung
• [U-Boot] [PATCH] mmc: set rca to 1 for MMC cards   Jaehoon Chung
  • [U-Boot] [PATCH] relocate-rela: replace a magic number with sizeof(Elf64_Rela)   Masahiro Yamada
  • [U-Boot] [PATCH] relocate-rela: replace a magic number with sizeof(Elf64_Rela)   Scott Wood
  • [U-Boot] [PATCH] relocate-rela: replace a magic number with sizeof(Elf64_Rela)   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Scott Wood
  • [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Alexander Graf
  • [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Scott Wood
  • [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Alexander Graf
  • [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Scott Wood
• [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
  • [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
  • [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
  • [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
  • [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [PATCH v2 4/6] PPC 85xx: Find CCSRBAR on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 4/6] PPC 85xx: Find CCSRBAR on ppce500 from device tree   Alexander Graf
• [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Alexander Graf
  • [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Alexander Graf
  • [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Alexander Graf
  • [U-Boot] [Qemu-ppc] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Alexander Graf
  • [U-Boot] [Qemu-ppc] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Scott Wood
• [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Alexander Graf
  • [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Alexander Graf
  • [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Scott Wood
  • [U-Boot] [PATCH] serial: s5p: set automatically clears after resetting Rx FIFO   Inha Song
  • [U-Boot] [PATCH] serial: s5p: set automatically clears after resetting Rx FIFO   Lukasz Majewski
  • [U-Boot] [PATCH] serial: s5p: set automatically clears after resetting Rx FIFO   Minkyu Kang
• [U-Boot] U-Boot DWC2 unused variables   Stephen Warren
  • [U-Boot] U-Boot DWC2 unused variables   Oleksandr Tymoshenko
• [U-Boot] U-Boot DWC2 warning removal   Stephen Warren
• [U-Boot] help for sabre lite   Mathieu Barbe
  • [U-Boot] help for sabre lite   Eric Nelson
• [U-Boot] Clarification   JYOTI DUBEY
  • [U-Boot] [PATCH v9 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v9 05/38] examples: Use scripts/Makefile.build   Masahiro Yamada
  • [U-Boot] [PATCH v9 08/38] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 10/38] kbuild: import Kbuild.include from linux v3.13 tag   Masahiro Yamada
  • [U-Boot] [PATCH v9 17/38] kbuild: change out-of-tree build   Masahiro Yamada
  • [U-Boot] [PATCH v9 20/38] kbuild: import more build scripts from Linux v3.13 tag   Masahiro Yamada
  • [U-Boot] [PATCH v9 22/38] kbuild: delete temporary build scripts   Masahiro Yamada
  • [U-Boot] [PATCH v9 25/38] kbuild: move include directives of board configuration files   Masahiro Yamada
  • [U-Boot] [PATCH v9 27/38] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
  • [U-Boot] [PATCH v9 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
  • [U-Boot] [PATCH v9 0/38] Switch over to real Kbuild   Otavio Salvador
  • [U-Boot] [PATCH v9 0/38] Switch over to real Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v9 0/38] Switch over to real Kbuild   Tom Rini
  • [U-Boot] [PATCH v9 01/38] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v9 02/38] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
  • [U-Boot] [PATCH v9 03/38] tools: convert makefiles to kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v9 04/38] board: samsung: refactor host programs   Masahiro Yamada
  • [U-Boot] [PATCH v9 06/38] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
  • [U-Boot] [PATCH v9 07/38] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
  • [U-Boot] [PATCH v9 09/38] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 11/38] kbuild: Use Kbuild.include   Masahiro Yamada
  • [U-Boot] [PATCH v9 12/38] Makefile: move more flags to the top Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 13/38] Makefile: refactor include path settings   Masahiro Yamada
  • [U-Boot] [PATCH v9 14/38] Makefile: move more stuff to top Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 15/38] Makefile: move some flags to spl/Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 16/38] Makefile: move some flags to examples makefiles   Masahiro Yamada
  • [U-Boot] [PATCH v9 18/38] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
  • [U-Boot] [PATCH v9 19/38] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
  • [U-Boot] [PATCH v9 21/38] kbuild: use Linux Kernel build scripts   Masahiro Yamada
  • [U-Boot] [PATCH v9 23/38] kbuild: move some lines to more suitable place   Masahiro Yamada
  • [U-Boot] [PATCH v9 24/38] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v9 26/38] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
  • [U-Boot] [PATCH v9 28/38] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
  • [U-Boot] [PATCH v9 29/38] examples: move api/ and standalone/ entry to examples/Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 30/38] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
  • [U-Boot] [PATCH v9 31/38] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v9 32/38] Makefile: refactor tools-all targets   Masahiro Yamada
  • [U-Boot] [PATCH v9 33/38] kbuild: use scripts/Makefile.clean   Masahiro Yamada
  • [U-Boot] [PATCH v9 34/38] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
  • [U-Boot] [PATCH v9 35/38] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
  • [U-Boot] [PATCH v9 36/38] board: sandburst: delete FORCEBUILD   Masahiro Yamada
  • [U-Boot] [PATCH v9 37/38] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
  • [U-Boot] [PATCH v4 0/9] Add support for the ARC700 architecture   Alexey Brodkin
  • [U-Boot] [PATCH v4 1/9] arc: add architecture header files   Alexey Brodkin
  • [U-Boot] [PATCH v4 2/9] arc: add cpu files   Alexey Brodkin
  • [U-Boot] [PATCH v4 3/9] arc: add library functions   Alexey Brodkin
  • [U-Boot] [PATCH v4 4/9] arc: bdinfo, image and arc-specific init functions declarations support   Alexey Brodkin
  • [U-Boot] [PATCH v4 5/9] arc: add support for standalone programs   Alexey Brodkin
  • [U-Boot] [PATCH v4 6/9] arc: add Arcangel4 board support   Alexey Brodkin
  • [U-Boot] [PATCH v4 7/9] arc: add AXS101 board support   Alexey Brodkin
  • [U-Boot] [PATCH v4 8/9] arc: add architecture to MAKEALL   Alexey Brodkin
  • [U-Boot] [PATCH v4 9/9] arc: add README for architecture   Alexey Brodkin
  • [U-Boot] [PATCH v4 0/9] Add support for the ARC700 architecture   Alexey Brodkin
  • [U-Boot] [PATCH v4 0/9] Add support for the ARC700 architecture   Tom Rini
  • [U-Boot] [PATCH v4 0/9] Add support for the ARC700 architecture   Alexey Brodkin
• [U-Boot] Internal Boot mode   JYOTI DUBEY
  • [U-Boot] Internal Boot mode   Stefano Babic
    • [U-Boot] [PATCH v2 0/3] Simplify dts/Makefile and support multiple DTBs generation   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/3] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
    • [U-Boot] [PATCH v2 3/3] dts: generate multiple device tree blobs   Masahiro Yamada
    • [U-Boot] [PATCH v2 3/3] dts: generate multiple device tree blobs   Simon Glass
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Masahiro Yamada
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Simon Glass
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Masahiro Yamada
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Simon Glass
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Masahiro Yamada
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Simon Glass
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Tom Rini
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Michal Simek
    • [U-Boot] [PATCH v2 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Scott Wood
• [U-Boot] [PATCH] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
    • [U-Boot] [PATCH] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
• [U-Boot] [PATCH 3/3] kernel-doc: fix some errors   Masahiro Yamada
  • [U-Boot] V2 implementation of generic distro options   Dennis Gilmore
  • [U-Boot] [PATCH V2 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Dennis Gilmore
  • [U-Boot] [PATCH V2 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Tom Rini
  • [U-Boot] [PATCH V2 2/2] config: add config_distro_defaults.h   Dennis Gilmore
  • [U-Boot] [PATCH V2 2/2] config: add config_distro_defaults.h   Stephen Warren
  • [U-Boot] [PATCH V2 2/2] config: add config_distro_defaults.h   Tom Rini
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Gupta, Pekon
  • [U-Boot] NAND bad block table   Michal Simek
  • [U-Boot] NAND bad block table   Scott Wood
  • [U-Boot] NAND bad block table   Michal Simek
  • [U-Boot] NAND bad block table   Scott Wood
• [U-Boot] Question about Coding-Style   Hannes Petermaier
  • [U-Boot] Question about Coding-Style   Stefano Babic
    • [U-Boot] Question about Coding-Style   Michael Trimarchi
    • [U-Boot] Question about Coding-Style   Hannes Petermaier
      • [U-Boot] Question about Coding-Style   Stefano Babic
      • [U-Boot] Question about Coding-Style   Tom Rini
      • [U-Boot] Question about Coding-Style   Albert ARIBAUD
      • [U-Boot] Question about Coding-Style   Chris Moore
      • [U-Boot] Question about Coding-Style   Albert ARIBAUD
      • [U-Boot] Question about Coding-Style   Wolfgang Denk
      • [U-Boot] Question about Coding-Style   Wolfgang Denk
      • [U-Boot] Question about Coding-Style   Tom Rini
  • [U-Boot] Question about Coding-Style   Wolfgang Denk
  • [U-Boot] Question about Coding-Style   Scott Wood
    • [U-Boot] Question about Coding-Style   Fabio Estevam
  • [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Otavio Salvador
    • [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Tom Rini
      • [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Otavio Salvador
      • [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Tom Rini
• [U-Boot] [PATCH v2] ext4fs: Add ext4 extent cache for read operations   Ionut Nicu
  • [U-Boot] [U-Boot, v2] ext4fs: Add ext4 extent cache for read operations   Tom Rini
  • [U-Boot] [Regression][ext4] Regression at EXT4 filesystem code   Lukasz Majewski
    • [U-Boot] [Regression][ext4] Regression at EXT4 filesystem code   Ionut Nicu
      • [U-Boot] [Regression][ext4] Regression at EXT4 filesystem code   Tom Rini
• [U-Boot] [GIT PULL] clk command   Michal Simek
  • [U-Boot] [GIT PULL] clk command   Tom Rini
• [U-Boot] [GIT PULL] microblaze changes   Michal Simek
  • [U-Boot] [GIT PULL] microblaze changes   Tom Rini
• [U-Boot] [GIT PULL] Microblaze/Zynq network fixes   Michal Simek
  • [U-Boot] [GIT PULL] Microblaze/Zynq network fixes   Tom Rini
• [U-Boot] [PATCH] xilinx_spi: Move timeout calculation out of the loop   Michal Simek
• [U-Boot] [GIT PULL] Uartlite patch   Michal Simek
  • [U-Boot] [GIT PULL] Uartlite patch   Tom Rini
• [U-Boot] [PATCH] zynq: Fix elf header generation   Michal Simek
  • [U-Boot] [PATCH] zynq: Fix elf header generation   Tom Rini
  • [U-Boot] [PATCH] zynq: Fix elf header generation   Michal Simek
  • [U-Boot] [PATCH] zynq: Fix elf header generation   Masahiro Yamada
    • [U-Boot] [PATCH] zynq: Fix elf header generation   Michal Simek
      • [U-Boot] [PATCH v4 0/5] sf: Optimize spi_flash features code   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v4 1/5] sf: ops: Squash the malloc+memset combo   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v4 1/5] sf: ops: Squash the malloc+memset combo   Marek Vasut
      • [U-Boot] [PATCH v4 2/5] sf: Optimize flash features code   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v4 2/5] sf: Optimize flash features code   Marek Vasut
      • [U-Boot] [PATCH v4 3/5] sf: Use slave mode for dual_flash connection   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v4 4/5] doc: SPI: Update the dual_flash info   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v4 5/5] sf: Update bank configuration   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v2 00/12] Series v2.   Mateusz Zalega
      • [U-Boot] [PATCH v2 01/12] mmc: mmc header fix   Mateusz Zalega
      • [U-Boot] [PATCH v2 02/12] part: header fix   Mateusz Zalega
      • [U-Boot] [PATCH v2 03/12] arm:goni: Update configuration for goni target   Mateusz Zalega
      • [U-Boot] [PATCH v2 04/12] dfu: fix boards wo USB cable detection   Mateusz Zalega
      • [U-Boot] [PATCH v2 04/12] dfu: fix boards wo USB cable detection   Marek Vasut
      • [U-Boot] [PATCH v2 05/12] am335x: dfu: disable DFU in am335x_evm SPL build   Mateusz Zalega
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
      • [U-Boot] [PATCH v2 06/12] USB: gadget: added a saner gadget downloader registration API   Marek Vasut
      • [U-Boot] [PATCH v2 07/12] arm:goni:dfu Add support for DFU to Goni target   Mateusz Zalega
      • [U-Boot] [PATCH v2 08/12] arm:goni: enable GPT command   Mateusz Zalega
      • [U-Boot] [PATCH v2 09/12] arm:goni: enable USB Mass Storage   Mateusz Zalega
      • [U-Boot] [PATCH v2 10/12] dfu:mmc: raw data write fix   Mateusz Zalega
      • [U-Boot] [PATCH v2 10/12] dfu:mmc: raw data write fix   Marek Vasut
      • [U-Boot] [PATCH v2 11/12] mmc: postponed needless timer initialization   Mateusz Zalega
      • [U-Boot] [PATCH v2 12/12] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
      • [U-Boot] [PATCH v2 12/12] ums: always initialize mmc before ums_disk_init()   Marek Vasut
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Wolfgang Denk
      • [U-Boot] [PATCH v2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
    • [U-Boot] [PATCH] xilinx_spi: Move timeout calculation out of the loop   Jagan Teki
  • [U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
    • [U-Boot] [PATCH v3] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
• [U-Boot] u-boot compile error: Source object has EABI version 5, but target has EABI version 0   Abdullah YILDIZ
  • [U-Boot] u-boot compile error: Source object has EABI version 5, but target has EABI version 0   Wolfgang Denk
  • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
    • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
      • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
  • [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
  • [U-Boot] [PATCH 1/2] socfpga: Adding Clock Manager driver   Chin Liang See
  • [U-Boot] [PATCH 2/2] socfpga: Adding Clock Manager handoff file   Chin Liang See
  • [U-Boot] [PATCH v3] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Chin Liang See
    • [U-Boot] [RESEND PATCH 1/2 v2] socfpga: Adding Scan Manager driver   Chin Liang See
    • [U-Boot] [RESEND PATCH 1/2 v2] socfpga: Adding Scan Manager driver   Albert ARIBAUD
    • [U-Boot] [RESEND PATCH 1/2 v2] socfpga: Adding Scan Manager driver -- ROLLED BACK.   Albert ARIBAUD
    • [U-Boot] [RESEND PATCH 1/2 v2] socfpga: Adding Scan Manager driver -- ROLLED BACK.   Albert ARIBAUD
    • [U-Boot] [RESEND PATCH 1/2 v2] socfpga: Adding Scan Manager driver -- ROLLED BACK.   Chin Liang See
    • [U-Boot] [RESEND PATCH 2/2 v2] socfpga: Adding Scan Manager IOCSR handoff files   Chin Liang See
    • [U-Boot] [RESEND PATCH 2/2 v2] socfpga: Adding Scan Manager IOCSR handoff files   Albert ARIBAUD
    • [U-Boot] README: document CONFIG_CMD_FS_GENERIC   Tom Rini
    • [U-Boot] [PATCH V2 1/2] pxe: support "devicetree" tag   Tom Rini
    • [U-Boot] [PATCH V2 2/2] pxe: implement fdtdir extlinux.conf tag   Tom Rini
      • [U-Boot] [PATCH V3 1/3] ARM: tegra: convert tegra to use distro defaults   Stephen Warren
      • [U-Boot] [PATCH V3 2/3] ARM: tegra: rework boot scripts   Stephen Warren
      • [U-Boot] [PATCH V3 2/3] ARM: tegra: rework boot scripts   Andreas Färber
      • [U-Boot] [PATCH V3 2/3] ARM: tegra: rework boot scripts   Stephen Warren
      • [U-Boot] [PATCH V3 3/3] ARM: tegra: implement bootcmd_pxe   Stephen Warren
    • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Stephen Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Stephen Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] [PATCH] .gitignore: drop include/asm from ignored file list   Masahiro Yamada
      • [U-Boot] .gitignore: drop include/asm from ignored file list   Tom Rini
      • [U-Boot] [PATCH v2 0/3] Adjust and fix kernel-doc   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/3] kernel-doc: move kernel-doc tools to scripts/   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 1/3] kernel-doc: move kernel-doc tools to scripts/   Tom Rini
      • [U-Boot] [PATCH v2 2/3] kernel-doc: update kernel-doc related files to Linux v3.13   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 2/3] kernel-doc: update kernel-doc related files to Linux v3.13   Tom Rini
      • [U-Boot] [PATCH v2 3/3] kernel-doc: fix some errors   Masahiro Yamada
      • [U-Boot] [U-Boot,v2,3/3] kernel-doc: fix some errors   Tom Rini
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Stephen Warren
• [U-Boot] [PATCH] ARM: rpi_b: set $fdtfile in default environment   Stephen Warren
  • [U-Boot] [PATCH] ARM: rpi_b: set $fdtfile in default environment   Stephen Warren
    • [U-Boot] [PATCH] ARM: rpi_b: set $fdtfile in default environment   Albert ARIBAUD
      • [U-Boot] [PATCH v3 0/3] Simplify dts/Makefile and support multiple DTBs generation   Masahiro Yamada
      • [U-Boot] [PATCH v3 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH v3 1/3] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
      • [U-Boot] [U-Boot, v3, 1/3] dts: re-write dts/Makefile more simply with Kbuild   Tom Rini
      • [U-Boot] [U-Boot, v3, 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
      • [U-Boot] [U-Boot, v3, 1/3] dts: re-write dts/Makefile more simply with Kbuild   Tom Rini
      • [U-Boot] [PATCH v3 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Masahiro Yamada
      • [U-Boot] [U-Boot, v3, 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Tom Rini
      • [U-Boot] [U-Boot, v3, 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Masahiro Yamada
      • [U-Boot] [U-Boot, v3, 2/3] dts: move device tree sources to arch/$(ARCH)/dts/   Tom Rini
      • [U-Boot] [PATCH v3 3/3] dts: generate multiple device tree blobs   Masahiro Yamada
      • [U-Boot] [PATCH v3 3/3] dts: generate multiple device tree blobs   Simon Glass
      • [U-Boot] [U-Boot, v3, 3/3] dts: generate multiple device tree blobs   Tom Rini
      • [U-Boot] [PATCH 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Stephen Warren
      • [U-Boot] [PATCH 3/4] ARM: rpi_b: load /uEnv.txt from MMC at startup   Stephen Warren
      • [U-Boot] [PATCH 2/4] ARM: rpi_b: convert to use distro defaults   Stephen Warren
      • [U-Boot] [PATCH 4/4] ARM: rpi_b: rework boot scripts, enable sysboot   Stephen Warren
• [U-Boot] [PATCH RESEND 1/2] serial: opencores_yanu: Fix build error   Axel Lin
  • [U-Boot] [PATCH RESEND 1/2] serial: opencores_yanu: Fix build error   Thomas Chou
• [U-Boot] [PATCH RESEND 2/2] serial: opencores_yanu: Avoid duplicate oc_serial_setbrg() implementation   Axel Lin
  • [U-Boot] [PATCH RESEND 2/2] serial: opencores_yanu: Avoid duplicate oc_serial_setbrg() implementation   Thomas Chou
    • [U-Boot] [PATCH RESEND] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Shinde
    • [U-Boot] [PATCH RESEND] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
    • [U-Boot] [PATCH RESEND] MMC: DWMMC: Correct the CLKDIV register value   Jaehoon Chung
    • [U-Boot] [PATCH RESEND] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
    • [U-Boot] [PATCH RESEND] MMC: DWMMC: Correct the CLKDIV register value   Pantelis Antoniou
    • [U-Boot] [PATCH] powerpc/t104xrdb, t1040qds : Update FMAN microcode NOR address   Priyanka Jain
    • [U-Boot] [PATCH] powerpc/t104xrdb, t1040qds : Update FMAN microcode NOR address   York Sun
• [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Michal Simek
  • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Albert ARIBAUD
    • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Michal Simek
      • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Albert ARIBAUD
      • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Michal Simek
      • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Albert ARIBAUD
  • [U-Boot] [PATCH] zynq: Use full tftpboot command instead of shortcut tftp   Albert ARIBAUD
• [U-Boot] [PATCH v2] zynq: Fix elf header generation   Michal Simek
  • [U-Boot] [PATCH v2] zynq: Fix elf header generation   Albert ARIBAUD
• [U-Boot] [PATCH v2] zynq: Update CLK in bdinfo   Michal Simek
  • [U-Boot] [PATCH v2] zynq: Update CLK in bdinfo   Albert ARIBAUD
    • [U-Boot] [PATCH v2] zynq: Update CLK in bdinfo   Michal Simek
• [U-Boot] [PATCH 1/3] exynos: pinmux: sort the list of peripherals   Minkyu Kang
• [U-Boot] [PATCH 2/3] exynos: pinmux: remove unnecessary define   Minkyu Kang
• [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Minkyu Kang
  • [U-Boot] [PATCH 1/1] SMC91111: Fix compilation warnings   Bhupesh Sharma
  • [U-Boot] [U-Boot,1/1] SMC91111: Fix compilation warnings   Tom Rini
  • [U-Boot] enabling post for arm in uboot   shobin b
  • [U-Boot] enabling post for arm in uboot   Michael Trimarchi
  • [U-Boot] [PATCH v2 0/6] usb:samsung: Exynos4 SoC USB code improvements   Lukasz Majewski
  • [U-Boot] [PATCH v2 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Lukasz Majewski
  • [U-Boot] [PATCH v2 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Marek Vasut
  • [U-Boot] [PATCH v2 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Lukasz Majewski
  • [U-Boot] [PATCH v2 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Marek Vasut
  • [U-Boot] [PATCH v2 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Lukasz Majewski
  • [U-Boot] [PATCH v2 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Lukasz Majewski
  • [U-Boot] [PATCH v2 3/6] usb:udc:samsung: Allow burst transfers for non EP0 endpints   Lukasz Majewski
  • [U-Boot] [PATCH v2 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
  • [U-Boot] [PATCH v2 5/6] usb:gadget:f_thor: Allocate request up to THOR_PACKET_SIZE not ep->maxpacket   Lukasz Majewski
  • [U-Boot] [PATCH v2 6/6] usb:gadget:f_thor: cosmetic: Remove debug memset   Lukasz Majewski
  • [U-Boot] [PATCH v2 0/6] usb:samsung: Exynos4 SoC USB code improvements   Marek Vasut
  • [U-Boot] [PATCH] ARM: imx6: fix wrong fec clk   Markus Niebel
  • [U-Boot] [PATCH] ARM: imx6: fix wrong fec clk   Stefano Babic
  • [U-Boot] [PATCH] NET: fec_mxc: fix MDIO clock prescaler calculation   Markus Niebel
  • [U-Boot] [PATCH] NET: fec_mxc: fix MDIO clock prescaler calculation   Stefano Babic
  • [U-Boot] [PATCH] NET: fec_mxc: fix MDIO clock prescaler calculation   Stefano Babic
  • [U-Boot] [PATCH] board: Add support for B&R T-Series Motherboard   Hannes Petermaier
  • [U-Boot] [PATCH v2] board: Add support for B&R T-Series Motherboard   Hannes Petermaier
  • [U-Boot] [PATCH v2] board: Add support for B&R T-Series Motherboard   Wolfgang Denk
  • [U-Boot] [PATCH v3] board: Add support for B&R T-Series Motherboard   Hannes Petermaier
  • [U-Boot] [U-Boot, v3] board: Add support for B&R T-Series Motherboard   Tom Rini
  • [U-Boot] [PATCH v3 1/8] SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK   Tom Rini
  • [U-Boot] [PATCH v3 2/8] cmd_mmc.c: Change 'bootpart' code to match normal coding style   Tom Rini
  • [U-Boot] [PATCH v3 2/8] cmd_mmc.c: Change 'bootpart' code to match normal coding style   Pantelis Antoniou
  • [U-Boot] [PATCH v3 3/8] cmd_mmc.c: Rename 'bootpart' to 'bootpart-resize'   Tom Rini
  • [U-Boot] [PATCH v3 3/8] cmd_mmc.c: Rename 'bootpart' to 'bootpart-resize'   Pantelis Antoniou
  • [U-Boot] [PATCH v3 4/8] cmd_mmc.c: Add 'partconf' command to mmc   Tom Rini
  • [U-Boot] [PATCH v3 4/8] cmd_mmc.c: Add 'partconf' command to mmc   Pantelis Antoniou
  • [U-Boot] [PATCH v3 5/8] cmd_mmc.c: Add bootbus mmc sub-command   Tom Rini
  • [U-Boot] [PATCH v3 5/8] cmd_mmc.c: Add bootbus mmc sub-command   Pantelis Antoniou
  • [U-Boot] [PATCH v3 6/8] cmd_mmc.c: Drop open/close mmc sub-commands   Tom Rini
  • [U-Boot] [PATCH v3 6/8] cmd_mmc.c: Drop open/close mmc sub-commands   Pantelis Antoniou
  • [U-Boot] [PATCH v3 7/8] omap5_uevm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Tom Rini
  • [U-Boot] [PATCH v3 7/8] omap5_uevm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Pantelis Antoniou
  • [U-Boot] [PATCH v3 8/8] dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Tom Rini
  • [U-Boot] [PATCH v3 8/8] dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Pantelis Antoniou
  • [U-Boot] [PATCH v3 1/8] SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK   Pantelis Antoniou
  • [U-Boot] [PATCH] board: Add support for B&R KWB Motherboard   Hannes Petermaier
  • [U-Boot] [PATCH] board: Add support for B&R KWB Motherboard   Tom Rini
  • [U-Boot] [PATCH] board: Add support for B&R KWB Motherboard   Wolfgang Denk
  • [U-Boot] [PATCH v2] Add support for B&R KWB Motherboard   Hannes Petermaier
  • [U-Boot] [U-Boot,v2] Add support for B&R KWB Motherboard   Tom Rini
  • [U-Boot] [PATCH V4 1/3] ARM: tegra: convert tegra to use distro defaults   Stephen Warren
  • [U-Boot] [PATCH V4 2/3] ARM: tegra: rework boot scripts   Stephen Warren
  • [U-Boot] [PATCH V4 2/3] ARM: tegra: rework boot scripts   Dennis Gilmore
  • [U-Boot] [PATCH V4 2/3] ARM: tegra: rework boot scripts   Stephen Warren
  • [U-Boot] [PATCH V4 2/3] ARM: tegra: rework boot scripts   Dennis Gilmore
  • [U-Boot] [PATCH V4 2/3] ARM: tegra: rework boot scripts   Stephen Warren
  • [U-Boot] [PATCH V4 3/3] ARM: tegra: implement bootcmd_pxe   Stephen Warren
  • [U-Boot] [PATCH V4 1/3] ARM: tegra: convert tegra to use distro defaults   Stephen Warren
• [U-Boot] [RFC PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector   Frank Bormann
  • [U-Boot] [PATCH] common: Remove invalid endianess conversion   Christian Eggers
  • [U-Boot] [PATCH] common: Remove invalid endianess conversion   Wolfgang Denk
  • [U-Boot] [PATCH v3 0/2] IMX6: Add Gateworks Ventana support   Tim Harvey
  • [U-Boot] [PATCH v3 1/2] power: add PFUZE100 PMIC driver   Tim Harvey
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
  • [U-Boot] [PATCH v3 1/2] power: add PFUZE100 PMIC driver   Tim Harvey
  • [U-Boot] [PATCH v3 1/2] power: add PFUZE100 PMIC driver   Stefano Babic
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Wolfgang Denk
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Wolfgang Denk
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Tom Rini
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
  • [U-Boot] [PATCH v3 2/2] ventana: Add Gateworks Ventana family support   Stefano Babic
  • [U-Boot] [PATCH] usb: mv_udc: Rename to ci_udc   Marek Vasut
  • [U-Boot] [PATCH] usb: mv_udc: Rename to ci_udc   Fabio Estevam
  • [U-Boot] [PATCH] usb: mv_udc: Rename to ci_udc   Eric Nelson
  • [U-Boot] [PATCH] usb: mv_udc: Rename to ci_udc   Marek Vasut
  • [U-Boot] [PATCH V2] usb: mv_udc: Rename to ci_udc   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-pxa/master   Albert ARIBAUD
    • [U-Boot] [PATCH] i2c: i2c-mxs: Wait for I2C to empty queue   Marek Vasut
    • [U-Boot] [PATCH] ARM: bcm2835: fix mbox POWER_STATE_RESP_ON value   Stephen Warren
    • [U-Boot] [PATCH] ARM: bcm2835: fix mbox POWER_STATE_RESP_ON value   Albert ARIBAUD
    • [U-Boot] [PATCH] tools: mxsboot: Implement SPI SMEM block support   Marek Vasut
    • [U-Boot] [PATCH 1/4] aes: Fix kerneldoc for aes.h   Marek Vasut
    • [U-Boot] [PATCH 2/4] aes: Move the AES-128-CBC encryption function to common code   Marek Vasut
    • [U-Boot] [PATCH 2/4] aes: Move the AES-128-CBC encryption function to common code   Simon Glass
    • [U-Boot] [PATCH 3/4] aes: Implement AES-128-CBC decryption function   Marek Vasut
    • [U-Boot] [PATCH 4/4] aes: Add 'aes' command to access AES-128-CBC   Marek Vasut
    • [U-Boot] [PATCH 1/4] aes: Fix kerneldoc for aes.h   Simon Glass
    • [U-Boot] [PATCH 1/3] env: Add env_export() wrapper   Marek Vasut
    • [U-Boot] [PATCH 2/3] env: Implement support for encrypting environment   Marek Vasut
    • [U-Boot] [PATCH 3/3] env: Implement support for AES encryption into fw_* tools   Marek Vasut
    • [U-Boot] [PATCH 3/3] env: Implement support for AES encryption into fw_* tools   Wolfgang Denk
    • [U-Boot] [PATCH 3/3] env: Implement support for AES encryption into fw_* tools   Marek Vasut
    • [U-Boot] [PATCH 3/3] env: Implement support for AES encryption into fw_* tools   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Marek Vasut
    • [U-Boot] [PATCH 3/3] fit: rsa: Add support for SHA256 hash   Marek Vasut
    • [U-Boot] [PATCH 3/3] fit: rsa: Add support for SHA256 hash   Simon Glass
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Heiko Schocher
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Marek Vasut
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Heiko Schocher
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Marek Vasut
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] fit: Add support for SHA256 hash   Marek Vasut
    • [U-Boot] [PATCH 2/3] fit: rsa: Add groundwork to support other hashes   Marek Vasut
    • [U-Boot] [PATCH 2/3] fit: rsa: Add groundwork to support other hashes   Wolfgang Denk
    • [U-Boot] [PATCH 2/3] fit: rsa: Add groundwork to support other hashes   Marek Vasut
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Stephen Warren
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Albert ARIBAUD
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Stephen Warren
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Albert ARIBAUD
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Tom Rini
    • [U-Boot] [PATCH V2 1/4] pxe: allow compilation when !defined(CONFIG_CMD_NET)   Albert ARIBAUD
    • [U-Boot] [PATCH V2 2/4] ARM: rpi_b: convert to use distro defaults   Stephen Warren
    • [U-Boot] [PATCH V2 3/4] ARM: rpi_b: load /uEnv.txt from MMC at startup   Stephen Warren
    • [U-Boot] [PATCH V2 4/4] ARM: rpi_b: rework boot scripts, enable sysboot   Stephen Warren
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PATCH] include/usb/s3c_udc.h: Add <asm/sizes.h>   Tom Rini
  • [U-Boot] [PATCH] include/usb/s3c_udc.h: Add <asm/sizes.h>   Tom Rini
  • [U-Boot] [PATCH] include/usb/s3c_udc.h: Add <asm/sizes.h>   Lukasz Majewski
  • [U-Boot] [PATCH] include/usb/s3c_udc.h: Add <asm/sizes.h>   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 1/2] exynos: clock: fixed that cfg is set to wrong value.   Jaehoon Chung
  • [U-Boot] [PATCH 1/2] exynos: clock: fixed that cfg is set to wrong value.   Minkyu Kang
• [U-Boot] [PATCH 2/2] exynos: clock: use the clear and set bits macros.   Jaehoon Chung
  • [U-Boot] [PATCH 2/2] exynos: clock: use the clear and set bits macros.   Minkyu Kang
    • [U-Boot] [RFC PATCH] usb: add driver for Synopsis DWC2 USB IP block   Stephen Warren
    • [U-Boot] [RFC PATCH 1/2] ARM: rpi_b: enable USB features in config   Stephen Warren
    • [U-Boot] [RFC PATCH 2/2] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
• [U-Boot] [RFC PATCH] usb: add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] i.mx6 board booting   JYOTI DUBEY
    • [U-Boot] i.mx6 board booting   Eric Nelson
      • [U-Boot] [PATCH] nds32: fix code/data will be corrupted on ram in rum time   Andes
      • [U-Boot] [PATCH] nds32: fix code/data will be corrupted on ram in rum time   Wolfgang Denk
• [U-Boot] [GIT PULL] Fpga changes   Michal Simek
  • [U-Boot] [GIT PULL] Fpga changes   Tom Rini
• [U-Boot] u-boot 2014.01 snow (chromebook ARM) status?   Guillaume Gardet
• [U-Boot] arm post tests   shobin b
  • [U-Boot] [PATCH 1/2] ush: ehci: initialize altnext pointers in QH   Stephen Warren
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Stephen Warren
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Marek Vasut
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Stephen Warren
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Marek Vasut
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Stephen Warren
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Marek Vasut
  • [U-Boot] [PATCH 2/2] usb: ehci: fully align interrupt QHs/QTDs   Stephen Warren
  • [U-Boot] [PATCH 1/2] ush: ehci: initialize altnext pointers in QH   Marek Vasut
  • [U-Boot] [PATCH 1/2] ush: ehci: initialize altnext pointers in QH   Stephen Warren
  • [U-Boot] [PATCH 1/2] ush: ehci: initialize altnext pointers in QH   Marek Vasut
  • [U-Boot] [PATCH 1/2] ush: ehci: initialize altnext pointers in QH   Stephen Warren
• [U-Boot] [PATCH v2] common: Remove invalid endianess conversion   Christian Eggers
  • [U-Boot] [PATCH v2] common: Remove invalid endianess conversion   Rommel G Custodio
    • [U-Boot] [PATCH v3] common: Remove invalid endianess conversion   Christian Eggers
    • [U-Boot] [U-Boot, v3] common: Remove invalid endianess conversion   Tom Rini
    • [U-Boot] [PATCH] configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE   Masahiro Yamada
    • [U-Boot] configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE   Tom Rini
    • [U-Boot] [PATCH v3 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
    • [U-Boot] [PATCH v3 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
    • [U-Boot] [PATCH v3 3/6] gpio: kona: Add Kona gpio driver   Darwin Rambo
    • [U-Boot] [PATCH v3 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
    • [U-Boot] [PATCH v3 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
    • [U-Boot] [PATCH v3 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
    • [U-Boot] [PATCH v3 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
    • [U-Boot] [PATCH v3 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
    • [U-Boot] [PATCH v3 1/6] arch: kona: Initial commit of kona-common architecture code   Albert ARIBAUD
    • [U-Boot] [PATCH v3 1/6] arch: kona: Initial commit of kona-common architecture code   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
  • [U-Boot] Pull request: u-boot-blackfin   Tom Rini
  • [U-Boot] http://www.xrefs.info: u-boot source code cross reference   xrefs.info Admin
• [U-Boot] [PATCH V2 0/8] arm: add runtime envs describing build   Minkyu Kang
• [U-Boot] uboot/linux version compatibilty   santosh
  • [U-Boot] uboot/linux version compatibilty   Wolfgang Denk
• [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Minkyu Kang
  • [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Piotr Wilczek
    • [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Minkyu Kang
      • [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Piotr Wilczek
      • [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Minkyu Kang
• [U-Boot] [PATCH 2/9] video:mipidsim:fdt: Add DT support for mipi dsim driver   Minkyu Kang
  • [U-Boot] [PATCH 2/9] video:mipidsim:fdt: Add DT support for mipi dsim driver   Piotr Wilczek
• [U-Boot] [PATCH 3/9] video:exynos_fb:fdt: add additional fdt data   Minkyu Kang
  • [U-Boot] [PATCH 3/9] video:exynos_fb:fdt: add additional fdt data   Piotr Wilczek
    • [U-Boot] [PATCH] configs: Delete unused CONFIG_SYS_64BIT_{VSPRINTF, STRTOUL}   Masahiro Yamada
    • [U-Boot] configs: Delete unused CONFIG_SYS_64BIT_{VSPRINTF, STRTOUL}   Tom Rini
• [U-Boot] arm64 patch: gicv3 support   Arnab Basu
  • [U-Boot] [PATCH 0/15] Follow-up for Kbuild series: more misc targets and short logs   Masahiro Yamada
  • [U-Boot] [PATCH 02/15] kbuild: abolish "depend" target   Masahiro Yamada
  • [U-Boot] [PATCH 06/15] kbuild: use shorten logs objcopy rules   Masahiro Yamada
  • [U-Boot] [PATCH 0/15] Follow-up for Kbuild series: more misc targets and short logs   Simon Glass
  • [U-Boot] [PATCH 0/15] Follow-up for Kbuild series: more misc targets and short logs   Masahiro Yamada
  • [U-Boot] [PATCH 0/15] Follow-up for Kbuild series: more misc targets and short logs   Tom Rini
  • [U-Boot] [PATCH 0/15] Follow-up for Kbuild series: more misc targets and short logs   Masahiro Yamada
  • [U-Boot] [PATCH 01/15] kbuild: consolidate version and timestamp headers generation   Masahiro Yamada
  • [U-Boot] [PATCH 03/15] kbuild: move asm-offsets.h rules to ./Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH 04/15] kbuild: rename OBJCFLAGS to OBJCOPYFLAGS   Masahiro Yamada
  • [U-Boot] [PATCH 05/15] kbuild: Add $(Q) when descending into subdirectories   Masahiro Yamada
  • [U-Boot] [PATCH 05/15] kbuild: Add $(Q) when descending into subdirectories   Simon Glass
  • [U-Boot] [PATCH 07/15] kbuild: use shorten logs for mkimage rules   Masahiro Yamada
  • [U-Boot] [PATCH 08/15] kbuild: use shorten logs for cat rules   Masahiro Yamada
  • [U-Boot] [PATCH 09/15] kbuild: use shorten logs for combined rules of mkimage, padding and cat   Masahiro Yamada
  • [U-Boot] [PATCH 10/15] kbuild: use shorten log for linking u-boot   Masahiro Yamada
  • [U-Boot] [PATCH 11/15] kbuild: use shorten logs for misc targets   Masahiro Yamada
  • [U-Boot] [PATCH 12/15] kbuild: use shorten logs for IMX images   Masahiro Yamada
  • [U-Boot] [PATCH 12/15] kbuild: use shorten logs for IMX images   Simon Glass
  • [U-Boot] [PATCH 12/15] kbuild: use shorten logs for IMX images   Masahiro Yamada
  • [U-Boot] [PATCH 12/15] kbuild: use shorten logs for IMX images   Simon Glass
  • [U-Boot] [PATCH 13/15] kbuild: refactor more IMX image rules   Masahiro Yamada
  • [U-Boot] [PATCH 14/15] kbuild: support building signle targets   Masahiro Yamada
  • [U-Boot] [PATCH 15/15] kbuild: add misc targets, help, ubootrelease, ubootversion   Masahiro Yamada
  • [U-Boot] serial/serial_arc - add driver for ARC UART   Tom Rini
    • [U-Boot] serial/serial_arc - add driver for ARC UART   Alexey Brodkin
    • [U-Boot] serial/serial_arc - add driver for ARC UART   Tom Rini
• [U-Boot] [PATCH] zynq: Add support for U-BOOT SPL   Michal Simek
  • [U-Boot] [PATCH] zynq: Add support for U-BOOT SPL   Tom Rini
  • [U-Boot] [PATCH] zynq: Add support for U-BOOT SPL   Albert ARIBAUD
  • [U-Boot] [PATCH] zynq: Add support for U-BOOT SPL   Michal Simek
  • [U-Boot] [PATCH] x600: Switch to CONFIG_PHYLIB   Tom Rini
  • [U-Boot] [PATCH] x600: Switch to CONFIG_PHYLIB   Stefan Roese
  • [U-Boot] [PATCH] x600: Switch to CONFIG_PHYLIB   Tom Rini
  • [U-Boot] net/designware: add explicit reset of {tx|rx}_currdescnum   Tom Rini
  • [U-Boot] net: execute "miiphy_init" if CONFIG_PHYLIB defined   Tom Rini
  • [U-Boot] [U-Boot, v2] net/designware - switch driver to phylib usage   Tom Rini
  • [U-Boot] [U-Boot, v3] net/designware: make driver compatible with data cache   Tom Rini
    • [U-Boot] [PATCH] mmc: set rca to 1 for MMC cards   Pantelis Antoniou
    • [U-Boot] [PATCH] mmc: Enabled quirk SDHCI_QUIRK_BROKEN_R1B   Pantelis Antoniou
    • [U-Boot] [PATCH v3 1/2] env_mmc: make board configurable the partition for the environment   Pantelis Antoniou
    • [U-Boot] [PATCH v3 1/2] env_mmc: make board configurable the partition for the environment   Palacios, Hector
    • [U-Boot] Pull request: u-boot-mmc 07022014   Pantelis Antoniou
    • [U-Boot] Pull request: u-boot-mmc 07022014   Tom Rini
    • [U-Boot] [PATCH V2] ush: ehci: initialize altnext pointers in QH   Stephen Warren
    • [U-Boot] [PATCH V2] ush: ehci: initialize altnext pointers in QH   Marek Vasut
    • [U-Boot] [PATCH] mmc: Add 'mmc rst-function' sub-command   Tom Rini
    • [U-Boot] [PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Murali Karicheri
    • [U-Boot] [[PATCH 2/7] tools: sort the entries in Makefile   Murali Karicheri
    • [U-Boot] [[PATCH 3/7 v1] tools: mkimage: add support for gpimage format   Murali Karicheri
    • [U-Boot] [[PATCH 5/7 v1] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
    • [U-Boot] [[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Murali Karicheri
    • [U-Boot] [[PATCH 7/7] keystone2: net: add keystone ethernet driver   Murali Karicheri
    • [U-Boot] [[PATCH 7/7] keystone2: net: add keystone ethernet driver   Mugunthan V N
    • [U-Boot] [[PATCH 1/7] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Murali Karicheri
    • [U-Boot] [[PATCH 4/7 v1] arm: add support for arch timer   Murali Karicheri
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 1/7] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 1/7] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Tom Rini
    • [U-Boot] [U-Boot:RESEND][[PATCH 1/7] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Vitaly Andrianov
    • [U-Boot] [U-Boot:RESEND][[PATCH 2/7] tools: sort the entries in Makefile   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 3/7 v1] tools: mkimage: add support for gpimage format   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 4/7 v1] arm: add support for arch timer   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 5/7 v1] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Murali Karicheri
    • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Tom Rini
    • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Vitaly Andrianov
    • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Tom Rini
    • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Andrianov, Vitaly
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Albert ARIBAUD
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Murali Karicheri
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Albert ARIBAUD
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Murali Karicheri
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Albert ARIBAUD
    • [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM   Tom Rini
    • [U-Boot] [PATCH 0/2] Post-mainline updates of serial_arc driver   Alexey Brodkin
    • [U-Boot] [PATCH 0/2] Post-mainline updates of serial_arc driver   Alexey Brodkin
    • [U-Boot] [PATCH 1/2] serial/serial_arc: add work-around of ISS bug   Alexey Brodkin
    • [U-Boot] [U-Boot, 1/2] serial/serial_arc: add work-around of ISS bug   Tom Rini
    • [U-Boot] [PATCH 2/2] serial/serial_arc: switch from {read|write}l to {read|write}b accessors   Alexey Brodkin
    • [U-Boot] [U-Boot, 2/2] serial/serial_arc: switch from {read|write}l to {read|write}b accessors   Tom Rini
    • [U-Boot] [PATCH] axs101: fix dw gmac instantiation for updated dw gmac driver   Alexey Brodkin
    • [U-Boot] [PATCH] axs101: fix dw gmac instantiation for updated dw gmac driver   Alexey Brodkin
    • [U-Boot] axs101: fix dw gmac instantiation for updated dw gmac driver   Tom Rini
    • [U-Boot] [PATCH] axs101: change command prompt marker to match marketing name of the board   Alexey Brodkin
    • [U-Boot] axs101: change command prompt marker to match marketing name of the board   Tom Rini
• [U-Boot] [PATCH] serial: arc: Convert to use default_serial_puts   Axel Lin
  • [U-Boot] serial: arc: Convert to use default_serial_puts   Tom Rini
• [U-Boot] Reg: Bootloader Configuration   Sujith K R
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Marek Vasut
  • [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
    • [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Marek Vasut
      • [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
      • [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Marek Vasut
      • [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
• [U-Boot] [PATCH 6/7] tools, fit: add fit_info host command   Marek Vasut
  • [U-Boot] [PATCH 6/7] tools, fit: add fit_info host command   Heiko Schocher
    • [U-Boot] [PATCH 6/7] tools, fit: add fit_info host command   Marek Vasut
• [U-Boot] i.MX6Q board with DDR3 on a DIMM slot   Ivan Fildichev
  • [U-Boot] [PATCH v2 0/8] common, fit, rsa: enhancements   Heiko Schocher
  • [U-Boot] [PATCH v2 1/8] tools/image-host: fix sign-images bug   Heiko Schocher
  • [U-Boot] [PATCH v2 3/8] fit: add sha256 support   Heiko Schocher
  • [U-Boot] [PATCH v2 3/8] fit: add sha256 support   Simon Glass
  • [U-Boot] [PATCH v2 3/8] fit: add sha256 support   Heiko Schocher
  • [U-Boot] [PATCH v2 3/8] fit: add sha256 support   Heiko Schocher
  • [U-Boot] [PATCH v2 3/8] fit: add sha256 support   Simon Glass
  • [U-Boot] [PATCH v2 4/8] rsa: add sha256-rsa2048 algorithm   Heiko Schocher
  • [U-Boot] [PATCH v2 4/8] rsa: add sha256-rsa2048 algorithm   Simon Glass
  • [U-Boot] [PATCH v2 5/8] rsa: add sha256,rsa4096 algorithm   Heiko Schocher
  • [U-Boot] [PATCH v2 5/8] rsa: add sha256,rsa4096 algorithm   Simon Glass
  • [U-Boot] [PATCH v2 7/8] tools, fit: add fit_info host command   Heiko Schocher
  • [U-Boot] [PATCH v2 8/8] tools, fit_check_sign: verify a signed fit image   Heiko Schocher
  • [U-Boot] [PATCH v2 8/8] tools, fit_check_sign: verify a signed fit image   Simon Glass
  • [U-Boot] [PATCH v2 2/8] fdt: add "fdt checksign" command   Heiko Schocher
  • [U-Boot] [PATCH v2 2/8] fdt: add "fdt checksign" command   Simon Glass
  • [U-Boot] [PATCH v2 2/8] fdt: add "fdt checksign" command   Simon Glass
  • [U-Boot] [PATCH v2 2/8] fdt: add "fdt checksign" command   Simon Glass
  • [U-Boot] [PATCH v2 6/8] gen: Add progressive hash API   Heiko Schocher
  • [U-Boot] [PATCH v2 6/8] gen: Add progressive hash API   Simon Glass
  • [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support   Bo Shen
  • [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support   Wolfgang Denk
  • [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support   Bo Shen
• [U-Boot] ATMEL AT45DB041D spi flash and gplugd   Yogi P
  • [U-Boot] ATMEL AT45DB041D spi flash and gplugd   Jagan Teki
  • [U-Boot] ATMEL AT45DB041D spi flash and gplugd   yogi p
  • [U-Boot] [PATCH 1/3] mpc85xx: Add support for the supplement configuration unit register   Tang Yuantian
  • [U-Boot] [PATCH 3/3] mpc85xx: Add deep sleep support on T1040QDS   Tang Yuantian
  • [U-Boot] [PATCH] env: disable CONFIG_ETHADDR & CONFIG_IPADDR   Alexey Brodkin
  • [U-Boot] [PATCH] env: disable CONFIG_ETHADDR & CONFIG_IPADDR   Tom Rini
• [U-Boot] Secure uboot functionality   JYOTI DUBEY
  • [U-Boot] Secure uboot functionality   Jagan Teki
    • [U-Boot] [PATCH v3 1/2] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR   Zhao Qiang
    • [U-Boot] [PATCH v3 2/2] Powerpc/QE: Add QE support for T1040   Zhao Qiang
    • [U-Boot] [PATCH 0/3] Make designware_i2c driver platform independent   Alexey Brodkin
    • [U-Boot] [PATCH 1/3] spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs   Alexey Brodkin
    • [U-Boot] [PATCH 2/3] designware_i2c: remove inclusion of <asm/arch/hardware.h>   Alexey Brodkin
    • [U-Boot] [PATCH 3/3] arc: remove "hardware.h"   Alexey Brodkin
    • [U-Boot] [PATCH 1/2] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Markus Niebel
    • [U-Boot] [PATCH 2/2] spi: mxc_spi: i.MX6 DL/S have only 4 eCSPI controller   Markus Niebel
    • [U-Boot] [PATCH 1/2] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Jagan Teki
    • [U-Boot] [PATCH 1/2] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Markus Niebel
    • [U-Boot] [PATCH 1/2] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Jagan Teki
  • [U-Boot] is u-boot config arndale working?   Mj Embd
    • [U-Boot] is u-boot config arndale working?   Guillaume Gardet
      • [U-Boot] is u-boot config arndale working?   Mj Embd
      • [U-Boot] is u-boot config arndale working?   Guillaume Gardet
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
  • [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
    • [U-Boot] [GIT PULL] Zynq patches   Michal Simek
  • [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
    • [U-Boot] [GIT PULL] Zynq patches   Michal Simek
      • [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
      • [U-Boot] [GIT PULL] Zynq patches v2   Michal Simek
      • [U-Boot] [GIT PULL] Zynq patches v2   Albert ARIBAUD
      • [U-Boot] [GIT PULL] Zynq patches v2   Michal Simek
• [U-Boot] [U-boot] sandbox for aarch64 question   TigerLiu at viatech.com.cn
  • [U-Boot] [U-boot] sandbox for aarch64 question   Simon Glass
• [U-Boot] arm64 patch: gicv3 support   Arnab Basu
• [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
  • [U-Boot] Chain loading an u-boot from an u-boot   Andreas Bießmann
    • [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
      • [U-Boot] Chain loading an u-boot from an u-boot   Scott Wood
      • [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
  • [U-Boot] Chain loading an u-boot from an u-boot   Stefano Babic
    • [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
      • [U-Boot] Chain loading an u-boot from an u-boot   Stefano Babic
      • [U-Boot] Chain loading an u-boot from an u-boot   Andreas Bießmann
      • [U-Boot] Chain loading an u-boot from an u-boot   Helmut Raiger
• [U-Boot] u-boot - timestamp   Abdullah YILDIZ
  • [U-Boot] u-boot - timestamp   Albert ARIBAUD
    • [U-Boot] u-boot - timestamp   Abdullah YILDIZ
      • [U-Boot] u-boot - timestamp   James Chargin
      • [U-Boot] u-boot - timestamp   Wolfgang Denk
  • [U-Boot] P2041RDB: gcc 4.8.2/binutils 2.23.1 default to new GOT table layout   Joerg Albert
    • [U-Boot] P2041RDB: gcc 4.8.2/binutils 2.23.1 default to new GOT table layout   Scott Wood
      • [U-Boot] [PATCH] ARM: AM43xx: GP-EVM: Correct GPIO used for VTT regulator control   Tom Rini
      • [U-Boot] ARM: AM43xx: GP-EVM: Correct GPIO used for VTT regulator control   Tom Rini
      • [U-Boot] Coding style: #ifdef or #if defined()   Manish Badarkhe
      • [U-Boot] Coding style: #ifdef or #if defined()   Wolfgang Denk
      • [U-Boot] [PATCH] i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd   Eric Nelson
      • [U-Boot] [PATCH] i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd   Stefano Babic
      • [U-Boot] [PATCH] i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd   Stefano Babic
      • [U-Boot] [PATCH] ARM: tegra: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS   Tom Warren
• [U-Boot] Fwd: [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR   York Sun
• [U-Boot] Fwd: [PATCH 2/3] armv8/cache: Flush D-cache, invalidate I-cache for relocation   York Sun
• [U-Boot] Fwd: [PATCH 3/3] armv8/cache: Change cache invalidate and flush function   York Sun
  • [U-Boot] [PATCH 1/3] driver/ddr: Change Freescale ARM DDR driver to support both big and little endian   York Sun
  • [U-Boot] [PATCH 2/3] Driver/ddr: Add support of different DDR base address   York Sun
  • [U-Boot] [U-Boot, 2/3] Driver/ddr: Add support of different DDR base address   Tom Rini
  • [U-Boot] [U-Boot, 1/3] driver/ddr: Change Freescale ARM DDR driver to support both big and little endian   Tom Rini
  • [U-Boot] [PATCH 3/3] driver/ddr: Add 256 byte interleaving support   York Sun
  • [U-Boot] [U-Boot, 3/3] driver/ddr: Add 256 byte interleaving support   Tom Rini
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Tom Rini
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Tom Rini
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Tom Rini
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Troy Kisky
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Wolfgang Denk
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Wolfgang Denk
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Wolfgang Denk
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Wolfgang Denk
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   Tom Rini
  • [U-Boot] [PATCH] driver/mxc_i2c: Move static data structure to global_data   York Sun
• [U-Boot] Fwd: [PATCH] arm/lib: Add get_effective_memsize() to board.c   York Sun
  • [U-Boot] [PATCH] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   York Sun
• [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   York Sun
  • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   Scott Wood
    • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   York Sun
      • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   Scott Wood
      • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   York Sun
      • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   Wolfgang Denk
      • [U-Boot] [PATCH] arm/lib: Add get_effective_memsize() to board.c   York Sun
      • [U-Boot] [PATCH v3 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   Alexander Graf
      • [U-Boot] [PATCH v3 3/6] PPC: 85xx: Remove IVOR reset   Alexander Graf
      • [U-Boot] [PATCH v3 5/6] PPC 85xx: Add ELF entry point   Alexander Graf
      • [U-Boot] [PATCH v3 1/6] fdt_support: split fdt_getprop_u32_default   Alexander Graf
      • [U-Boot] [PATCH v3 2/6] fdt_support: Add helper function to read "ranges" property   Alexander Graf
      • [U-Boot] [PATCH v3 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Alexander Graf
      • [U-Boot] [PATCH v3 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Scott Wood
      • [U-Boot] [PATCH v3 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Alexander Graf
      • [U-Boot] [PATCH v3 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Scott Wood
      • [U-Boot] [PATCH v3 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
      • [U-Boot] [PATCH v3 6/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
      • [U-Boot] [PATCH v3 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
      • [U-Boot] [PATCH v3 6/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [PATCH] arch-at91: Gets ethernet working on at91sam9g20 board   johnd
  • [U-Boot] [PATCH] arch-at91: Gets ethernet working on at91sam9g20 board   Andreas Bießmann
    • [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
    • [U-Boot] Pull request: u-boot-nios/master   Tom Rini
• [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Stefano Babic
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Stefano Babic
  • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
    • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Stefano Babic
      • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
      • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Stefano Babic
• [U-Boot] [PATCH] mx6sl: Adjust fdt_addr to avoid address overlapping   Stefano Babic
• [U-Boot] [PATCH 1/2] imx6: ensure AHB clock is 132MHz in low freq boot mode   Stefano Babic
• [U-Boot] [PATCH 2/2] imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure   Stefano Babic
• [U-Boot] [PATCH] hummingboard: Return from cpu_eth_init() directly   Stefano Babic
• [U-Boot] [PATCH v4 1/2] imx: Introduce a header for the imx cpu versions   Stefano Babic
• [U-Boot] [PATCH v4 2/2] mx6: Distinguish mx6dual from mx6quad   Stefano Babic
• [U-Boot] [PATCH] mx6qsabreauto: Update imximage.cfg   Stefano Babic
• [U-Boot] [PATCH v4] mx6: Enable L2 cache support   Stefano Babic
  • [U-Boot] [PATCH 1/6] Add MS7206SE support.   Yoshinori Sato
  • [U-Boot] [PATCH 2/6] SH2A cache support.   Yoshinori Sato
  • [U-Boot] [PATCH 4/6] module enabler cleanup.   Yoshinori Sato
  • [U-Boot] [PATCH 5/6] Add SH7206 support.   Yoshinori Sato
  • [U-Boot] [PATCH 6/6] Update build options.   Yoshinori Sato
  • [U-Boot] [PATCH 3/6] fix typo.   Yoshinori Sato
  • [U-Boot] [PATCH 1/6] Add MS7206SE support.   Yoshinori Sato
  • [U-Boot] [PATCH 2/6] SH2A cache support.   Yoshinori Sato
  • [U-Boot] [PATCH 4/6] module enabler cleanup.   Yoshinori Sato
  • [U-Boot] [PATCH 4/6] module enabler cleanup.   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 6/6] Update build options.   Yoshinori Sato
  • [U-Boot] [PATCH 1/6] Add MS7206SE support.   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 1/6] Add MS7206SE support.   Yoshinori Sato
  • [U-Boot] [PATCH 3/6] fix typo.   Yoshinori Sato
  • [U-Boot] [PATCH 5/6] Add SH7206 support.   Yoshinori Sato
• [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Marek Vasut
  • [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Stefano Babic
    • [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Marek Vasut
      • [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Stefano Babic
      • [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Marek Vasut
      • [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Simon Glass
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
  • [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
    • [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
      • [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
    • [U-Boot] how to get u-boot code with arm64: core support   Inderpal Singh
      • [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
      • [U-Boot] how to get u-boot code with arm64: core support   Inderpal Singh
      • [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
      • [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
      • [U-Boot] how to get u-boot code with arm64: core support   Inderpal Singh
• [U-Boot] T1040 booting from NOR Flash   Franck Jullien
  • [U-Boot] T1040 booting from NOR Flash   Rommel G Custodio
    • [U-Boot] T1040 booting from NOR Flash   Franck Jullien
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] Read line from console   Eric Nelson
  • [U-Boot] Read line from console   Wolfgang Denk
    • [U-Boot] Read line from console   Eric Nelson
      • [U-Boot] [PATCH v4 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
      • [U-Boot] [PATCH v4 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
      • [U-Boot] [PATCH v4 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
      • [U-Boot] [PATCH v4 3/6] gpio: kona: Add Kona gpio driver   Darwin Rambo
      • [U-Boot] [PATCH v4 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
      • [U-Boot] [PATCH v4 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
      • [U-Boot] [PATCH v4 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
      • [U-Boot] [PATCH v4 0/6] Introducing the Broadcom bcm281xx Architecture   Albert ARIBAUD
  • [PATCH] arch-at91: Gets ethernet working on at91sam9g20 board   John de la Garza
• [U-Boot] (no subject)   John de la Garza
  • [U-Boot] [Patch v2] common: Add get_effective_memsize() to memsize.c   York Sun
  • [U-Boot] [Patch v2] common: Add get_effective_memsize() to memsize.c   Albert ARIBAUD
  • [U-Boot] [Patch v2] common: Add get_effective_memsize() to memsize.c   York Sun
  • [U-Boot] [U-Boot, v2] common: Add get_effective_memsize() to memsize.c   Tom Rini
  • [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Brian Norris
• [U-Boot] NAND bad block table   Scott Wood
  • [U-Boot] NAND bad block table   Brian Norris
    • [U-Boot] [PATCH] fix address of error message in mtest command   fenghua at phytium.com.cn
    • [U-Boot] fix address of error message in mtest command   Tom Rini
• [U-Boot] [PATCH v2 07/13] ARM: HYP/non-sec: allow relocation to secure RAM   Albert ARIBAUD
  • [U-Boot] [PATCH v2 07/13] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
• [U-Boot] [PATCH v3] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Albert ARIBAUD
• [U-Boot] MAKEALL   Albert ARIBAUD
  • [U-Boot] MAKEALL   Masahiro Yamada
    • [U-Boot] MAKEALL   Simon Glass
      • [U-Boot] MAKEALL   Masahiro Yamada
• [U-Boot] Secure booting   JYOTI DUBEY
  • [U-Boot] Secure booting   TigerLiu at viatech.com.cn
    • [U-Boot] Secure booting   Simon Glass
• [U-Boot] [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset   Gupta, Pekon
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Stefano Babic
  • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
  • [PATCH] SION bit has to be on for the pins that are used as   Andy Ng
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Andy Ng
  • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
  • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Stefano Babic
    • [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Andy Ng
• [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Albert ARIBAUD
  • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Masahiro Yamada
    • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Albert ARIBAUD
      • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Masahiro Yamada
      • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Albert ARIBAUD
    • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Wolfgang Denk
      • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Masahiro Yamada
      • [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Tom Rini
      • [U-Boot] [PATCH v3] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Sergey Kostanbaev
      • [U-Boot] [PATCH v3] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Albert ARIBAUD
      • [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK   Andy Ng
      • [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK   Stefano Babic
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Hector Palacios
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Fabio Estevam
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Fabio Estevam
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Palacios, Hector
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Palacios, Hector
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Palacios, Hector
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Albert ARIBAUD
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Tom Rini
      • [U-Boot] [PATCH] part_efi: fix protective_mbr struct allocation   Lukasz Majewski
• [U-Boot] NAND bad block Query   Gray Remlin
  • [U-Boot] NAND bad block Query   Scott Wood
    • [U-Boot] NAND bad block Query   Gray Remlin
      • [U-Boot] NAND bad block Query   Scott Wood
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   York Sun
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   Wolfgang Denk
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   York Sun
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   York Sun
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   Albert ARIBAUD
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   Wolfgang Denk
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   FengHua
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   Albert ARIBAUD
      • [U-Boot] [RFC] Add 64-bit data support for memory commands   York Sun
      • [U-Boot] [PATCH] pxe: prepend fdtdir to DTB name irrespective of source   Stephen Warren
      • [U-Boot] [PATCH] pxe: prepend fdtdir to DTB name irrespective of source   Dennis Gilmore
      • [U-Boot] [PATCH] pxe: prepend fdtdir to DTB name irrespective of source   Stephen Warren
      • [U-Boot] [PATCH] pxe: prepend fdtdir to DTB name irrespective of source   Tom Rini
      • [U-Boot] pxe: prepend fdtdir to DTB name irrespective of source   Tom Rini
• [U-Boot] tlb15_entry is set wrong in the 4K code when the MPC8572DS boots from nand flash   Scott Wood
  • [U-Boot] tlb15_entry is set wrong in the 4K code when the MPC8572DS boots from nand flash   Y fan
• [U-Boot] tlb15_entry is set wrong in the 4K code when the MPC8572DS boots from nand flash   Scott Wood
  • [U-Boot] [RFC v2] Fix memory commands for 64-bit platforms   York Sun
  • [U-Boot] [RFC v2] Fix memory commands for 64-bit platforms   Wolfgang Denk
  • [U-Boot] [RFC v2] Fix memory commands for 64-bit platforms   York Sun
  • [U-Boot] [RFC v2] Fix memory commands for 64-bit platforms   Wolfgang Denk
  • [U-Boot] [U-Boot, RFC, v2] Fix memory commands for 64-bit platforms   Tom Rini
• [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Scott Wood
  • [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Tom Rini
  • [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
• [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
  • [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board   Haijun Zhang
  • [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board   York Sun
• [U-Boot] [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR   FengHua
  • [U-Boot] [PATCH] usb: create common header virtual root hub descriptors   Stephen Warren
  • [U-Boot] [PATCH] usb: create common header virtual root hub descriptors   Marek Vasut
  • [U-Boot] [PATCH] usb: create common header virtual root hub descriptors   Stephen Warren
  • [U-Boot] [PATCH] usb: create common header virtual root hub descriptors   Marek Vasut
• [U-Boot] Secure booting   JYOTI DUBEY
  • [U-Boot] Secure booting   Heiko Schocher
    • [U-Boot] Secure booting   Simon Glass
      • [U-Boot] [PATCH v4 0/2] IMX6: Add Gateworks Ventana support   Tim Harvey
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Tim Harvey
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Stefano Babic
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Fabio Estevam
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Stefano Babic
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Stefano Babic
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Tom Rini
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Fabio Estevam
      • [U-Boot] [PATCH v4 2/2] ventana: Add Gateworks Ventana family support   Tom Rini
      • [U-Boot] [PATCH v4 1/2] power: add PFUZE100 PMIC driver   Tim Harvey
      • [U-Boot] [PATCH][RFC] add pci bridge 64 bit prefechable mem support   fenghua at phytium.com.cn
• [U-Boot] how to get rid of "No base64 encoded MIME text parts"?   Yuantian Tang
  • [U-Boot] how to get rid of "No base64 encoded MIME text parts"?   Albert ARIBAUD
  • [U-Boot] how to get rid of "No base64 encoded MIME text parts"?   Shengzhou.Liu at freescale.com
    • [U-Boot] [PATCH v2] part_efi: fix protective mbr struct allocation   Hector Palacios
    • [U-Boot] [PATCH v2] part_efi: fix protective mbr struct allocation   Lukasz Majewski
    • [U-Boot] [PATCH v2] part_efi: fix protective mbr struct allocation   Lukasz Majewski
    • [U-Boot] [PATCH v2] part_efi: fix protective mbr struct allocation   Tom Rini
    • [U-Boot] [U-Boot, v2] part_efi: fix protective mbr struct allocation   Tom Rini
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Albert ARIBAUD
  • [U-Boot] [PATCH][RFC v2] add pci 64 bit prefechable mem support   fenghua at phytium.com.cn
  • [U-Boot] [PATCH][RFC v2] add pci 64 bit prefechable mem support   Wolfgang Denk
  • [U-Boot] [PATCH][RFC v2] add pci 64 bit prefechable mem support   FengHua
  • [U-Boot] [PATCH][RFC v2] add pci 64 bit prefechable mem support   Matt Porter
• [U-Boot] [PATCH 1/3] drivers/smc911x: Add support for shifted register read/write   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] board/snowball: Add support for network boot   Albert ARIBAUD
  • [U-Boot] [PATCH 0/2] Coding style to avoid #ifdef everywhere   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] Move #ifdef(CONFIG_DISPLAY_CPUINFO) from caller to callee   Masahiro Yamada
  • [U-Boot] [U-Boot, 1/2] Move #ifdef(CONFIG_DISPLAY_CPUINFO) from caller to callee   Tom Rini
  • [U-Boot] [PATCH 2/2] Move CONFIG_DISPLAY_CPUINFO to Makefile   Masahiro Yamada
  • [U-Boot] [U-Boot,2/2] Move CONFIG_DISPLAY_CPUINFO to Makefile   Tom Rini
• [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Albert ARIBAUD
  • [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
    • [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Albert ARIBAUD
    • [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
• [U-Boot] how to get rid of "No base64 encoded MIME text parts"?   Albert ARIBAUD
• [U-Boot] [ARM] Small rollback on u-boot-arm   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] socfpga: Adding Clock Manager driver   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] socfpga: Adding Clock Manager driver   Chin Liang See
• [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot   Albert ARIBAUD
  • [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
    • [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot   Ezaul Zillmer
    • [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
    • [U-Boot] [PATCH v2 00/13] ARMv7: add PSCI support to u-boot   Ezaul Zillmer
• [U-Boot] [PATCH 1/5] net: emaclite: Fix OF initialization   Michal Simek
  • [U-Boot] [PATCH 2/5] net: gem: Add OF initialization support   Michal Simek
  • [U-Boot] [PATCH 3/5] mmc: zynq: Add OF initialization support   Michal Simek
  • [U-Boot] [PATCH 4/5] zynq: Add OF ram initialization support   Michal Simek
  • [U-Boot] [PATCH 5/5] serial: zynq: Add OF initialization support   Michal Simek
    • [U-Boot] [PATCH 1/5] net: emaclite: Fix OF initialization   Tom Rini
• [U-Boot] [PATCH v5 2/3] arm: make _end compiler-generated   Albert ARIBAUD
  • [U-Boot] [PATCH v6 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
  • [U-Boot] [PATCH v6 2/3] arm: make _end compiler-generated   Albert ARIBAUD
  • [U-Boot] [PATCH v6 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Albert ARIBAUD
  • [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Albert ARIBAUD
• [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Albert ARIBAUD
  • [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Holger Brunck
    • [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Albert ARIBAUD
      • [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Holger Brunck
      • [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Valentin Longchamp
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH 1/10 V2] ARM: IXP: Remove actux1 board   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: rpi_b: set $fdtfile in default environment   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Albert ARIBAUD
  • [U-Boot] [PATCH V2 00/12] Exynos4: add support for device tree   Piotr Wilczek
  • [U-Boot] [PATCH V2 01/12] exynos4:pinmux:fdt: decode peripheral id   Piotr Wilczek
  • [U-Boot] [PATCH V2 02/12] video:mipidsim:fdt: Add DT support for mipi dsim driver   Piotr Wilczek
  • [U-Boot] [PATCH V2 03/12] video:exynos_fb:fdt: add additional fdt data   Piotr Wilczek
  • [U-Boot] [PATCH V2 04/12] drivers:mmc:sdhci: enable support for DT   Piotr Wilczek
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Piotr Wilczek
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Rajeshwari Birje
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Piotr Wilczek
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Rajeshwari Birje
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Minkyu Kang
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Piotr Wilczek
  • [U-Boot] [PATCH V2 05/12] board:samsung:common: remove unused max77686 init function   Minkyu Kang
  • [U-Boot] [PATCH V2 06/12] board:samsung: move checkboard to common file   Piotr Wilczek
  • [U-Boot] [PATCH V2 06/12] board:samsung: move checkboard to common file   Rajeshwari Birje
  • [U-Boot] [PATCH V2 07/12] arm:exynos: add common DTS file for exynos 4   Piotr Wilczek
  • [U-Boot] [PATCH V2 08/12] arm:exynos: enble sdhci and misc_init to common board   Piotr Wilczek
  • [U-Boot] [PATCH V2 09/12] board:origen: Enable device tree on Origen   Piotr Wilczek
  • [U-Boot] [PATCH V2 10/12] board:universal: Enable device tree on Universal   Piotr Wilczek
  • [U-Boot] [PATCH V2 10/12] board:universal: Enable device tree on Universal   Przemyslaw Marczak
  • [U-Boot] [PATCH V2 11/12] board:trats: Enable device tree on Trats   Piotr Wilczek
  • [U-Boot] [PATCH V2 12/12] board:trats2: Enable device tree on Trats2   Piotr Wilczek
  • [U-Boot] [PATCH v2 0/6] Add target board MS7206SE   Yoshinori Sato
  • [U-Boot] [PATCH v2 1/6] Add MS7206SE support   Yoshinori Sato
  • [U-Boot] [PATCH v2 2/6] Add MS7206SE ethernet support   Yoshinori Sato
  • [U-Boot] [PATCH v2 3/6] Add SH7206 support   Yoshinori Sato
  • [U-Boot] [PATCH v2 4/6] SH2A cache support   Yoshinori Sato
  • [U-Boot] [PATCH v2 5/6] Module enabler cleanup   Yoshinori Sato
  • [U-Boot] [PATCH v2 6/6] Various update   Yoshinori Sato
• [U-Boot] [PATCH 8/8] arm/km: introduce kmsugp1 target   Albert ARIBAUD
  • [U-Boot] [PATCH 8/8 v2] arm/km: introduce kmsugp1 target   Holger Brunck
  • [U-Boot] [PATCH 8/8 v2] arm/km: introduce kmsugp1 target   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] armv8/cache: Change cache invalidate and flush function   York Sun
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] Pull request: u-boot-arm/master   Stephen Warren
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] usb: tegra: Fix PHY configuration for Tegra 3   Stefan Agner
  • [U-Boot] [PATCH] usb: tegra: Fix PHY configuration for Tegra 3   Tom Warren
    • [U-Boot] [PATCH] usb: tegra: Fix PHY configuration for Tegra 3   Jim Lin
• [U-Boot] tlb15_entry is set wrong in the 4K code when the MPC8572DS boots from nand flash   Scott Wood
• [U-Boot] [PATCH v3] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Gerhard Sittig
  • [U-Boot] [PATCH V5] ARM: tegra: rework boot scripts   Stephen Warren
  • [U-Boot] [PATCH V3 4/4] ARM: rpi_b: rework boot scripts, enable sysboot   Stephen Warren
  • [U-Boot] [PATCH REPOST] usb: create common header virtual root hub descriptors   Stephen Warren
  • [U-Boot] [PATCH REPOST] usb: create common header virtual root hub descriptors   Stephen Warren
  • [U-Boot] [PATCH REPOST] usb: create common header virtual root hub descriptors   Bryan Wu
  • [U-Boot] [PATCH REPOST] usb: create common header virtual root hub descriptors   Marek Vasut
• [U-Boot] [PATCH v5 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Minkyu Kang
  • [U-Boot] [PATCH v5 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Rajeshwari Birje
    • [U-Boot] [PATCH v5 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v5 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Rajeshwari Birje
• [U-Boot] [PATCH REPOST] usb: create common header virtual root hub descriptors   Stefan Roese
  • [U-Boot] [PATCH] Exynos5250: Remove lowlevelinit   Rajeshwari Shinde
  • [U-Boot] [PATCH] Exynos5250: Remove lowlevelinit   Albert ARIBAUD
  • [U-Boot] [PATCH] Exynos5250: Remove lowlevelinit   Rajeshwari Birje
  • [U-Boot] [PATCH] Exynos5250: Remove lowlevelinit   Simon Glass
  • [U-Boot] [PATCH] Exynos5250: Remove lowlevelinit   Albert ARIBAUD
  • [U-Boot] [PATCH] arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)   Stefan Roese
  • [U-Boot] [PATCH] arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)   Stefano Babic
  • [U-Boot] arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)   Tom Rini
• [U-Boot] net: tsec: Pending patches   Claudiu Manoil
• [U-Boot] U-Boot XML support   Hannes Petermaier
  • [U-Boot] U-Boot XML support   Albert ARIBAUD
    • [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board   Stefano Babic
    • [U-Boot] [PATCH v1 2/3] omap3: fix pinmux for mcx board   Stefano Babic
    • [U-Boot] [U-Boot,v1,2/3] omap3: fix pinmux for mcx board   Tom Rini
    • [U-Boot] [U-Boot, v1, 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board   Tom Rini
    • [U-Boot] [PATCH v1 3/3] OMAP3: fix default environment for mcx board   Stefano Babic
    • [U-Boot] [U-Boot, v1, 3/3] OMAP3: fix default environment for mcx board   Tom Rini
    • [U-Boot] [PATCH 0/9] Refactoring and Endian bug fixes of fdt_support   Masahiro Yamada
    • [U-Boot] [PATCH 1/9] fdt_support: delete unnecessary DECLARE_GLOBAL_DATA_PTR   Masahiro Yamada
    • [U-Boot] [PATCH 4/9] fdt_support: delete force argument of fdt_chosen()   Masahiro Yamada
    • [U-Boot] [PATCH 9/9] fdt_support: correct the return condition of fdt_initrd()   Masahiro Yamada
    • [U-Boot] [PATCH 2/9] fdt_support: refactor with fdt_find_or_add_subnode helper func   Masahiro Yamada
    • [U-Boot] [PATCH 3/9] fdt_support: delete force argument of fdt_initrd()   Masahiro Yamada
    • [U-Boot] [PATCH 5/9] fdt_support: refactor fdt_fixup_stdout() function   Masahiro Yamada
    • [U-Boot] [PATCH 6/9] fdt_support: add 'const' qualifier for unchanged argument.   Masahiro Yamada
    • [U-Boot] [PATCH 6/9] fdt_support: add 'const' qualifier for unchanged argument.   Masahiro Yamada
    • [U-Boot] [PATCH 6/9] fdt_support: add 'const' qualifier for unchanged argument.   Tom Rini
    • [U-Boot] [PATCH 7/9] fdt_support: fix an endian bug of fdt_fixup_memory_banks   Masahiro Yamada
    • [U-Boot] [PATCH 8/9] fdt_support: fix an endian bug of fdt_initrd()   Masahiro Yamada
    • [U-Boot] [PATCH] Fix build of sx151x gpio driver   Viktar Palstsiuk
    • [U-Boot] [RFC] try to merge different i.MX environment   Stefano Babic
    • [U-Boot] [RFC] try to merge different i.MX environment   Otavio Salvador
    • [U-Boot] [RFC] try to merge different i.MX environment   Stefano Babic
    • [U-Boot] [RFC] try to merge different i.MX environment   Dennis Gilmore
    • [U-Boot] [RFC] try to merge different i.MX environment   Stefano Babic
    • [U-Boot] [RFC] try to merge different i.MX environment   Tom Rini
    • [U-Boot] [RFC] try to merge different i.MX environment   Wolfgang Denk
    • [U-Boot] [PATCH] MIPS: keep all sections in u-boot ELF binary.   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 0/3] mtd: nand: omap: fix ecc-layout   Pekon Gupta
    • [U-Boot] [PATCH v2 1/3] mtd: nand: omap: fix ecclayout->oobfree->offset   Pekon Gupta
    • [U-Boot] [PATCH v2 1/3] mtd: nand: omap: fix ecclayout->oobfree->offset   Brian Norris
    • [U-Boot] [PATCH v2 2/3] mtd: nand: omap: fix ecclayout->oobfree->length   Pekon Gupta
    • [U-Boot] [PATCH v2 3/3] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Pekon Gupta
• [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
  • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian-B29983
    • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
      • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian-B29983
      • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian-B29983
• [U-Boot] [PATCH v2] usb: tegra: Fix PHY configuration for Tegra 3   Stefan Agner
  • [U-Boot] [PATCH v2] usb: tegra: Fix PHY configuration for Tegra 3   Stefan Agner
    • [U-Boot] [PATCH v2] usb: tegra: Fix PHY configuration for Tegra 3   Jim Lin
      • [U-Boot] [PATCH v2] usb: tegra: Fix PHY configuration for Tegra 3   Stephen Warren
• [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
  • [U-Boot] test   Tang Yuantian
• [U-Boot] SATA Port Multiplier and AHCI Support   Aaron Williams
  • [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
  • [U-Boot] [PATCH v3 02/13] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Marc Zyngier
  • [U-Boot] [PATCH v3 03/13] ARM: non-sec: reset CNTVOFF to zero   Marc Zyngier
  • [U-Boot] [PATCH v3 06/13] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
  • [U-Boot] [PATCH v3 08/13] ARM: HYP/non-sec: add the option for a second-stage monitor   Marc Zyngier
  • [U-Boot] [PATCH v3 10/13] ARM: HYP/non-sec/PSCI: emit DT nodes   Marc Zyngier
  • [U-Boot] [PATCH v3 12/13] sunxi: HYP/non-sec: add sun7i PSCI backend   Marc Zyngier
  • [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Albert ARIBAUD
  • [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot   Marc Zyngier
  • [U-Boot] [PATCH v3 01/13] ARM: HYP/non-sec: move switch to non-sec to the last boot phase   Marc Zyngier
  • [U-Boot] [PATCH v3 04/13] ARM: add missing HYP mode constant   Marc Zyngier
  • [U-Boot] [PATCH v3 05/13] ARM: HYP/non-sec: add separate section for secure code   Marc Zyngier
  • [U-Boot] [PATCH v3 07/13] ARM: HYP/non-sec: add generic ARMv7 PSCI code   Marc Zyngier
  • [U-Boot] [PATCH v3 09/13] ARM: convert arch_fixup_memory_node to a generic FDT fixup function   Marc Zyngier
  • [U-Boot] [PATCH v3 11/13] sunxi: fix SRAM_B/SRAM_D memory map   Marc Zyngier
  • [U-Boot] [PATCH v3 13/13] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs   Marc Zyngier
  • [U-Boot] [PATCH 1/5] wandboard: Staticize usdhc1_pads   Fabio Estevam
  • [U-Boot] [PATCH 2/5] mmc: Add a prototype for board_mmc_init()   Fabio Estevam
  • [U-Boot] [PATCH 3/5] wandboard: Fix sparse warning   Fabio Estevam
  • [U-Boot] [PATCH 4/5] wandboard: Include <input.h>   Fabio Estevam
  • [U-Boot] [PATCH 5/5] fb: Add a prototype for board_video_skip()   Fabio Estevam
  • [U-Boot] [PATCH 1/5] wandboard: Staticize usdhc1_pads   Stefano Babic
  • [U-Boot] [PATCH 1/5] wandboard: Staticize usdhc1_pads   Fabio Estevam
  • [U-Boot] [PATCH 1/5] wandboard: Staticize usdhc1_pads   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] Add lzmadec command   Simon Glass
  • [U-Boot] [PATCH v2 2/2] sandbox: Enable CONFIG_CMD_LZMADEC in sandbox.h   Simon Glass
  • [U-Boot] [PATCH] endian dependency fix   Yoshinori Sato
  • [U-Boot] [PATCH] endian dependency fix   Masahiro Yamada
  • [U-Boot] [PATCH] endian dependency fix   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] endian dependency fix   Yoshinori Sato
  • [U-Boot] [PATCH] patman: Use Patch-cc: instead of Cc:   Simon Glass
  • [U-Boot] patman drops Cc tag   Simon Glass
• [U-Boot] [PATCH v6 07/17] dm: Add README for driver model   Simon Glass
• [U-Boot] [PATCH v3 0/3] ubs: tegra: two fixes and cleanup   Stefan Agner
  • [U-Boot] [PATCH v3 2/3] usb: tegra: fix PHY configuration   Stefan Agner
    • [U-Boot] [PATCH v3 2/3] usb: tegra: fix PHY configuration   Stephen Warren
• [U-Boot] [PATCH v3 1/3] usb: tegra: fix USB2 powerdown for Tegra30 and later   Stefan Agner
  • [U-Boot] [PATCH v3 1/3] usb: tegra: fix USB2 powerdown for Tegra30 and later   Stephen Warren
• [U-Boot] [PATCH v3 3/3] usb: tegra: combine header file   Stefan Agner
  • [U-Boot] [PATCH v3 3/3] usb: tegra: combine header file   Stephen Warren
    • [U-Boot] [PATCH v3 3/3] usb: tegra: combine header file   Stefan Agner
      • [U-Boot] [PATCH v3 3/3] usb: tegra: combine header file   Stephen Warren
      • [U-Boot] [PATCH 1/1] ARM: OMAP4: fix DDR timings for OMAP4430 ES2.0   Janne Grunau
      • [U-Boot] [U-Boot, 1/1] ARM: OMAP4: fix DDR timings for OMAP4430 ES2.0   Tom Rini
• [U-Boot] u-boot - timestamp   Wolfgang Denk
  • [U-Boot] u-boot - timestamp   TigerLiu at via-alliance.com
    • [U-Boot] u-boot - timestamp   Wolfgang Denk
      • [U-Boot] u-boot - timestamp   TigerLiu at via-alliance.com
      • [U-Boot] u-boot - timestamp   Wolfgang Denk
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
  • [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
    • [U-Boot] [PATCH v1 0/5] usb: eth: introduce Moschip MCS7830 driver   Gerhard Sittig
    • [U-Boot] [PATCH v1 1/5] usb: net: introduce support for Moschip USB ethernet   Gerhard Sittig
    • [U-Boot] [PATCH v1 1/5] usb: net: introduce support for Moschip USB ethernet   Marek Vasut
    • [U-Boot] [PATCH v1 1/5] usb: net: introduce support for Moschip USB ethernet   Gerhard Sittig
    • [U-Boot] [PATCH v1 1/5] usb: net: introduce support for Moschip USB ethernet   Marek Vasut
    • [U-Boot] [PATCH v1 2/5] arm: config: alpha-sort USB ethernet items for Asix and SMSC   Gerhard Sittig
    • [U-Boot] [PATCH v1 2/5] arm: config: alpha-sort USB ethernet items for Asix and SMSC   Simon Glass
    • [U-Boot] [PATCH v1 3/5] arm: config: enable Moschip USB ethernet support for several boards   Gerhard Sittig
    • [U-Boot] [PATCH v1 4/5] arm: config: enable USB ethernet for taskit stamp9g20   Gerhard Sittig
    • [U-Boot] [PATCH v1 5/5] usb: doc: update README.doc to list all USB ethernet options   Gerhard Sittig
    • [U-Boot] [PATCH v1 5/5] usb: doc: update README.doc to list all USB ethernet options   Simon Glass
    • [U-Boot] [PATCH v1 0/5] usb: eth: introduce Moschip MCS7830 driver   Marek Vasut
    • [U-Boot] [PATCH v1 0/5] usb: eth: introduce Moschip MCS7830 driver   Gerhard Sittig
• [U-Boot] Regarding u-boot patch about accurate boot time measurement   Simon Glass
  • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Abdullah Yıldız
    • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Albert ARIBAUD
      • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Abdullah Yıldız
      • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Simon Glass
      • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Abdullah Yıldız
      • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Simon Glass
      • [U-Boot] Regarding u-boot patch about accurate boot time measurement   Rommel G Custodio
      • [U-Boot] [PATCH] 85xx/b4860: Alternate serdes protocols for B4860/B4420   Poonam Aggrwal
      • [U-Boot] [PATCH] arm: zynq: correct the argument to lldiv   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH] arm: zynq: correct the argument to lldiv   Michal Simek
      • [U-Boot] [PATCH] arm: zynq: correct the argument to lldiv   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: zynq: correct the argument to lldiv   Michal Simek
      • [U-Boot] [PATCH v3 0/3] mtd: nand: omap: fix ecc-layout   Pekon Gupta
      • [U-Boot] [PATCH v3 1/3] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Pekon Gupta
      • [U-Boot] [PATCH v3 1/3] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Gupta, Pekon
      • [U-Boot] [PATCH v3 1/3] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Albert ARIBAUD
      • [U-Boot] [PATCH v3 1/3] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Brian Norris
      • [U-Boot] [PATCH v3 2/3] mtd: nand: omap: fix ecclayout->oobfree->offset   Pekon Gupta
      • [U-Boot] [PATCH v3 2/3] mtd: nand: omap: fix ecclayout->oobfree->offset   Gupta, Pekon
      • [U-Boot] [PATCH v3 3/3] mtd: nand: omap: fix ecclayout->oobfree->length   Pekon Gupta
      • [U-Boot] [PATCH v3 3/3] mtd: nand: omap: fix ecclayout->oobfree->length   Gupta, Pekon
      • [U-Boot] [PATCH v3 0/3] mtd: nand: omap: fix ecc-layout   Brian Norris
• [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Lukasz Majewski
  • [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Lukasz Majewski
    • [U-Boot] [PATCH] fsl/usb: fix phy_type checking   Nikhil Badola
    • [U-Boot] [PATCH] fsl/usb: fix phy_type checking   Albert ARIBAUD
    • [U-Boot] [PATCH] fsl/usb: fix phy_type checking   nikhil.badola at freescale.com
    • [U-Boot] [PATCH] fsl/usb: fix phy_type checking   Albert ARIBAUD
    • [U-Boot] [PATCH] powerpc/t2081qds: Add T2081 QDS board support   Shengzhou Liu
    • [U-Boot] [PATCH][v2] fsl/usb: Limit phy_type comparison to first four characters   Nikhil Badola
    • [U-Boot] [PATCH][v2] fsl/usb: Limit phy_type comparison to first four characters   York Sun
• [U-Boot] ECC/OOB question for kwbimage/openrd   Thomas Herrmann
  • [U-Boot] [PATCH v3 0/7]zynq: Add nand support   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 1/7] nand: Add zynq nand controller driver support   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 1/7] nand: Add zynq nand controller driver support   Michal Simek
  • [U-Boot] [PATCH v3 1/7] nand: Add zynq nand controller driver support   Scott Wood
  • [U-Boot] [PATCH v3 2/7] zynq-common: Define CONFIG_NAND_ZYNQ   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 3/7] zynq: Add zynq_zc770 xm011 board support   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 4/7] zynq: zc770: Add base dts for zc770_xm011   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 5/7] zynq: Add support for auto nandboot   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 5/7] zynq: Add support for auto nandboot   Andrew Murray
  • [U-Boot] [PATCH v3 5/7] zynq: Add support for auto nandboot   Jagan Teki
  • [U-Boot] [PATCH v3 5/7] zynq: Add support for auto nandboot   Jagan Teki
  • [U-Boot] [PATCH v3 6/7] doc: README.zynq: Updated with nand support addition   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 7/7] zynq: Enable nand env. support   Siva Durga Prasad Paladugu
  • [U-Boot] [Patch v2] spi: mxc-spi: fixes for ECSPI   Markus Niebel
  • [U-Boot] [Patch v2] spi: mxc-spi: fixes for ECSPI   Jagan Teki
  • [U-Boot] [PATCH v2 1/3] spi: spi-mxc: add defines for clk inactive state for ECSPI   Markus Niebel
  • [U-Boot] [PATCH v2 2/3] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Markus Niebel
  • [U-Boot] [PATCH v2 3/3] spi: mxc_spi: i.MX6 DL/S have only 4 eCSPI controller   Markus Niebel
  • [U-Boot] [Patch v3 0/3] spi: mxc-spi: fixes for ECSPI   Markus Niebel
  • [U-Boot] [Patch v3 2/3] spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3   Markus Niebel
  • [U-Boot] [Patch v3 1/3] spi: spi-mxc: add defines for clk inactive state for ECSPI   Markus Niebel
  • [U-Boot] [Patch v3 3/3] spi: mxc_spi: i.MX6 DL/S have only 4 eCSPI controller   Markus Niebel
  • [U-Boot] RFC unified boot environment   Dennis Gilmore
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dennis Gilmore
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dennis Gilmore
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Marek Vasut
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Marek Vasut
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Marek Vasut
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dennis Gilmore
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dennis Gilmore
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Eric Nelson
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Stephen Warren
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Dan Murphy
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Denys Dmytriyenko
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Otavio Salvador
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Tom Rini
  • [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.   Otavio Salvador
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dennis Gilmore
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Tom Rini
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Stephen Warren
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dan Murphy
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dan Murphy
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Stephen Warren
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dan Murphy
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Stephen Warren
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dan Murphy
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Stephen Warren
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dan Murphy
  • [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs   Dennis Gilmore
  • [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment   Dennis Gilmore
  • [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment   Otavio Salvador
  • [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment   Stephen Warren
  • [U-Boot] RFC unified boot environment   Stefano Babic
  • [U-Boot] RFC unified boot environment   Dennis Gilmore
  • [U-Boot] RFC unified boot environment   Tom Rini
• [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
  • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian-B29983
    • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Scott Wood
      • [U-Boot] [U-Boot, 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian-B29983
      • [U-Boot] [PATCH v2 0/7] usb: eth: introduce Moschip MCS7830 driver   Gerhard Sittig
      • [U-Boot] [PATCH v2 1/7] include: move the BIT() macro into the common.h header file   Gerhard Sittig
      • [U-Boot] [PATCH v2 1/7] include: move the BIT() macro into the common.h header file   Wolfgang Denk
      • [U-Boot] [PATCH v2 1/7] include: move the BIT() macro into the common.h header file   Gerhard Sittig
      • [U-Boot] [PATCH v2 2/7] usb: eth: don't ifdef routine declarations in usb_ether.h   Gerhard Sittig
      • [U-Boot] [PATCH v2 2/7] usb: eth: don't ifdef routine declarations in usb_ether.h   Simon Glass
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Gerhard Sittig
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Marek Vasut
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Gerhard Sittig
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Marek Vasut
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Wolfgang Denk
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Marek Vasut
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Wolfgang Denk
      • [U-Boot] [PATCH v2 3/7] usb: eth: introduce support for Moschip USB ethernet   Marek Vasut
      • [U-Boot] [PATCH v2 4/7] config: alpha-sort USB ethernet items for Asix and SMSC   Gerhard Sittig
      • [U-Boot] [PATCH v2 5/7] config: enable Moschip USB ethernet support for several boards   Gerhard Sittig
      • [U-Boot] [PATCH v2 6/7] config: enable USB ethernet for taskit stamp9g20   Gerhard Sittig
      • [U-Boot] [PATCH v2 7/7] usb: doc: update README.usb to list all USB ethernet options   Gerhard Sittig
• [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Tom Rini
  • [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM   Andrianov, Vitaly
    • [U-Boot] [PATCH v8 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
    • [U-Boot] [PATCH v8 01/14] sandbox: Build a device tree file for sandbox   Simon Glass
    • [U-Boot] [PATCH v8 02/14] Add cmd_process_error() to report and process errors   Simon Glass
    • [U-Boot] [PATCH v8 03/14] yaffs: Remove private list implementation   Simon Glass
    • [U-Boot] [PATCH v8 03/14] yaffs: Remove private list implementation   Marek Vasut
    • [U-Boot] [PATCH v8 03/14] yaffs: Remove private list implementation   Simon Glass
    • [U-Boot] [PATCH v8 04/14] dm: Add README for driver model   Simon Glass
    • [U-Boot] [PATCH v8 05/14] dm: Add base driver model support   Simon Glass
    • [U-Boot] [PATCH v8 06/14] sandbox: config: Enable driver model   Simon Glass
    • [U-Boot] [PATCH v8 07/14] dm: Set up driver model after relocation   Simon Glass
    • [U-Boot] [PATCH v8 08/14] dm: Add basic tests   Simon Glass
    • [U-Boot] [PATCH v8 09/14] dm: Add a 'dm' command for testing   Simon Glass
    • [U-Boot] [PATCH v8 10/14] dm: Add a demonstration/example driver   Simon Glass
    • [U-Boot] [PATCH v8 11/14] dm: Add GPIO support and tests   Simon Glass
    • [U-Boot] [PATCH v8 12/14] sandbox: Convert GPIOs to use driver model   Simon Glass
    • [U-Boot] [PATCH v8 13/14] dm: Enable gpio command to support driver model   Simon Glass
    • [U-Boot] [PATCH v8 13/14] dm: Enable gpio command to support driver model   Tom Rini
    • [U-Boot] [PATCH v8 13/14] dm: Enable gpio command to support driver model   Simon Glass
    • [U-Boot] [PATCH v8 13/14] dm: Enable gpio command to support driver model   Tom Rini
    • [U-Boot] [PATCH v8 13/14] dm: Enable gpio command to support driver model   Simon Glass
    • [U-Boot] [PATCH v8 14/14] dm: Remove old driver model documentation   Simon Glass
    • [U-Boot] [PATCH v8 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
    • [U-Boot] [PATCH v8 0/14] Driver model implementation, tests, demo and GPIO   Tom Rini
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
  • [U-Boot] [PATCH v4 1/2] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR   Zhao Qiang
  • [U-Boot] [PATCH] cosmetic: FIT: fix a strange comment   Masahiro Yamada
  • [U-Boot] [PATCH v4 2/2] Powerpc/QE: Add QE support for T1040   Zhao Qiang
  • [U-Boot] [PATCH v2] cosmetic: FIT: fix a strange comment   Masahiro Yamada
  • [U-Boot] [PATCH v2] cosmetic: FIT: fix a strange comment   Simon Glass
  • [U-Boot] [U-Boot,v2] cosmetic: FIT: fix a strange comment   Tom Rini
• [U-Boot] booting i.mx6   JYOTI DUBEY
  • [U-Boot] booting i.mx6   Christian Gmeiner
• [U-Boot] pre-compiled ARC gcc   Masahiro Yamada
  • [U-Boot] pre-compiled ARC gcc   Alexey Brodkin
    • [U-Boot] pre-compiled ARC gcc   Masahiro Yamada
    • [U-Boot] pre-compiled ARC gcc   Alexey Brodkin
    • [U-Boot] [PATCH] arc: fix relocation for big-endian target   Alexey Brodkin
    • [U-Boot] arc: fix relocation for big-endian target   Tom Rini
  • [U-Boot] Error Code "rm cannot remove directory 'asm/arch' : Is a directory"   Ambuj Saxena
    • [U-Boot] Error Code "rm cannot remove directory 'asm/arch' : Is a directory"   Albert ARIBAUD
      • [U-Boot] [PATCH 01/10] drivers: net: cpsw: add support to have phy address from cpsw platform data   Tom Rini
      • [U-Boot] [PATCH 03/10] ARM: AM43xx: Add CPSW support to AM43xx EPOS and GP EVM   Tom Rini
      • [U-Boot] [PATCH 04/10] ARM: AM335x: add support for reading cpsw 2nd mac address from efuse   Tom Rini
      • [U-Boot] [PATCH 05/10] ARM: DRA7xx: add support for reading cpsw 2nd mac from efuse   Tom Rini
      • [U-Boot] [PATCH 06/10] ARM: AM4372: Update EMIF registers for DDR3   Tom Rini
      • [U-Boot] [PATCH 07/10] ARM: AM43xx: Add Ethernet boot support to SPL   Tom Rini
      • [U-Boot] [PATCH 08/10] ARM: AM43xx: EMIF: configure self-refresh entry delay   Tom Rini
      • [U-Boot] [PATCH 09/10] ARM: AM43xx: Write sdram_config to secure_emif_sdram_config   Tom Rini
      • [U-Boot] [PATCH 10/10] ARM: AM43xx: Change DDR3 Reset Value   Tom Rini
      • [U-Boot] [PATCH 02/10] ARM: AM43xx: clocks: Enable CPGMAC clock control   Tom Rini
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Albert ARIBAUD
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Tom Rini
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Albert ARIBAUD
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Tom Rini
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Albert ARIBAUD
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Albert ARIBAUD
      • [U-Boot] [RFC] [PATCH] rewrite doc/README.arm-unaligned-accesses   Tom Rini
      • [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
      • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
      • [U-Boot] [PATCH] DRA7: fix ABB efuse offset for OPP_NOM   Nishanth Menon
      • [U-Boot] DRA7: fix ABB efuse offset for OPP_NOM   Tom Rini
      • [U-Boot] introduction of www.xrefs.info   John Smith
• [U-Boot] [U-boot] question about one env variable size   TigerLiu at via-alliance.com
  • [U-Boot] [U-boot] question about one env variable size   Wolfgang Denk
    • [U-Boot] [U-boot] question about one env variable size   TigerLiu at via-alliance.com
• [U-Boot] show_boot_progress   Abdullah YILDIZ
  • [U-Boot] show_boot_progress   Albert ARIBAUD
    • [U-Boot] show_boot_progress   Abdullah YILDIZ
      • [U-Boot] show_boot_progress   Albert ARIBAUD
      • [U-Boot] show_boot_progress   Abdullah YILDIZ
      • [U-Boot] show_boot_progress   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
    • [U-Boot] [PATCH] ENGR00299356 ARM:imx6 Fix USDHC driver bug in PIO mode   Ye.Li
    • [U-Boot] [PATCH] ENGR00299356 ARM:imx6 Fix USDHC driver bug in PIO mode   Albert ARIBAUD
    • [U-Boot] [PATCH] ENGR00299356 ARM:imx6 Fix USDHC driver bug in PIO mode   Stefano Babic
    • [U-Boot] [PATCH] ENGR00299356 ARM:imx6 Fix USDHC driver bug in PIO mode   Ye Li
    • [U-Boot] [PATCH] ENGR00299356 ARM:imx6 Fix USDHC driver bug in PIO mode   Wolfgang Denk
  • [U-Boot] getting environment variable   shobin b
    • [U-Boot] [PATCH] microblaze: remove an empty file arch/microblaze/lib/time.c   Masahiro Yamada
    • [U-Boot] [PATCH] microblaze: remove an empty file arch/microblaze/lib/time.c   Michal Simek
    • [U-Boot] [PATCH] microblaze: remove an empty file arch/microblaze/lib/time.c   Tom Rini
    • [U-Boot] [PATCH] microblaze: remove an empty file arch/microblaze/lib/time.c   Michal Simek
    • [U-Boot] [PATCH] microblaze: remove an empty file arch/microblaze/lib/time.c   Tom Rini
  • [U-Boot] uboot/linux version compatibilty   K.Kiran Kumar
    • [U-Boot] uboot/linux version compatibilty   Wolfgang Denk
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Albert ARIBAUD
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Stephen Warren
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Tom Rini
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Stephen Warren
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Stephen Warren
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Stephen Warren
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Albert ARIBAUD
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Tom Rini
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Tom Rini
      • [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild   Tom Rini
• [U-Boot] Patchwork would not pick my patch again   Masahiro Yamada
  • [U-Boot] Patchwork would not pick my patch again   Tom Rini
  • [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's   Philippe De Muyter
  • [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's   Troy Kisky
  • [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's   Philippe De Muyter
  • [U-Boot] [PATCH v2] net: fec_mxc: fix mii_speed configuration for MX6's   Philippe De Muyter
  • [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's   Markus Niebel
  • [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's   Philippe De Muyter
• [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Hector Palacios
  • [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Tom Rini
    • [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Tom Rini
      • [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Lukasz Majewski
      • [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Tom Rini
      • [U-Boot] [PATCH 0/2] bootstage: fix fdt stashing and reporting   Rommel G Custodio
      • [U-Boot] [PATCH 2/2] ootstage: powerpc: support fdt stash and reporting   Rommel G Custodio
      • [U-Boot] [PATCH 1/2] bootstage: arm: fix fdt stashing code   Rommel G Custodio
      • [U-Boot] [PATCH V2 0/2] bootstage: fix fdt stashing and reporting   Rommel G Custodio
      • [U-Boot] [PATCH V2 2/2] bootstage: powerpc: support fdt stash and reporting   Rommel G Custodio
      • [U-Boot] [PATCH V2 1/2] bootstage: arm: fix fdt stashing code   Rommel G Custodio
    • [U-Boot] doc: README: Correct file name of signature verification documentation   Tom Rini
    • [U-Boot] mini2440.h: Delete remainder of dead board   Tom Rini
    • [U-Boot] config: remove platform CONFIG_SYS_HZ definition part 3   Tom Rini
    • [U-Boot] fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUP   Tom Rini
    • [U-Boot] net, phy: atheros ar803x bug   Tom Rini
    • [U-Boot] EXT4: Fix number base handling of "ext4write" command   Tom Rini
• [U-Boot] [PATCH] OMAP3: igep00x0: Enable required clocks for GPIO that are used.   Enric Balletbo Serra
  • [U-Boot] [PATCH] net: phy: micrel: add support for KSZ8895 switch in SMI mode   Philippe De Muyter
  • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Albert ARIBAUD
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Albert ARIBAUD
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Wolfgang Denk
    • [U-Boot] [ANN] U-Boot v2014.04-rc1 released   Simon Glass
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Charles Manning
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Tom Rini
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Charles Manning
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Wolfgang Denk
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Tom Rini
    • [U-Boot] [PATCH] socfpga: Add a signing tool that automatically signs the preloader.   Gerhard Sittig
    • [U-Boot] [PATCH v10 0/6] arm: add Faraday SoC platform support   Kuo-Jung Su
    • [U-Boot] [PATCH v10 1/6] arm: add Faraday ARMv5TE cores support   Kuo-Jung Su
    • [U-Boot] [PATCH v10 2/6] arm: faraday: add FTTMR010 timer support   Kuo-Jung Su
    • [U-Boot] [PATCH v10 3/6] arm: faraday: add FTPWMTMR010 timer support   Kuo-Jung Su
    • [U-Boot] [PATCH v10 4/6] arm: faraday: add A369 evaluation board support   Kuo-Jung Su
    • [U-Boot] [PATCH v10 5/6] arm: faraday: add missing header file for FTSDC021   Kuo-Jung Su
    • [U-Boot] [PATCH v10 6/6] arm: faraday: add virtual machine support   Kuo-Jung Su
    • [U-Boot] [PATCH v2] powerpc/t2081qds: Add T2081 QDS board support   Shengzhou Liu
    • [U-Boot] [PATCH] venice2: move device tree to fix build error   Masahiro Yamada
    • [U-Boot] [PATCH] venice2: move device tree to fix build error   Stephen Warren
    • [U-Boot] [PATCH] venice2: move device tree to fix build error   Tom Warren
    • [U-Boot] [PATCH] venice2: move device tree to fix build error   Tom Rini
    • [U-Boot] [PATCH] venice2: move device tree to fix build error   Tom Rini
    • [U-Boot] [PATCH] .gitignore: ignore boot images by pattern rule /u-boot*   Masahiro Yamada
    • [U-Boot] .gitignore: ignore boot images by pattern rule /u-boot*   Tom Rini
    • [U-Boot] [PATCH] kbuild: a minor optimization of "make clobber"   Masahiro Yamada
    • [U-Boot] kbuild: a minor optimization of "make clobber"   Tom Rini
    • [U-Boot] [PATCH] dfu: mmc: fs: Fix format accepted by ext4write command   Lukasz Majewski
    • [U-Boot] [PATCH] dfu: mmc: fs: Fix format accepted by ext4write command   Tom Rini
    • [U-Boot] [PATCH v2] esdhc/usdhc: Fix PIO mode bug in fsl_esdhc driver   Ye.Li
    • [U-Boot] [PATCH] board/t104xRDB:remove CONFIG_SYS_FLASH_USE_BUFFER_WRITE for NOR   Prabhakar Kushwaha
    • [U-Boot] [PATCH] board/t104xRDB:remove CONFIG_SYS_FLASH_USE_BUFFER_WRITE for NOR   York Sun
    • [U-Boot] [PATCH v4 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   Alexander Graf
    • [U-Boot] [PATCH v4 1/6] fdt_support: split fdt_getprop_u32_default   Alexander Graf
    • [U-Boot] [PATCH v4 4/6] PPC: 85xx: Generalize DDR TLB mapping function   Alexander Graf
    • [U-Boot] [PATCH v4 5/6] PPC 85xx: Add ELF entry point   Alexander Graf
    • [U-Boot] [PATCH v4 2/6] fdt_support: Add helper function to read "ranges" property   Alexander Graf
    • [U-Boot] [PATCH v4 3/6] PPC: 85xx: Remove IVOR reset   Alexander Graf
    • [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
    • [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [PATCH] blackfin: Add <asm/clock.h> to numerous drivers   Tom Rini
  • [U-Boot] [PATCH] blackfin: Add <asm/clock.h> to numerous drivers   Tom Rini
  • [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] Pull request (with merge conflict resolution): u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request (with merge conflict resolution): u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v2 0/3] uboot sata support for sunxi platform   Ian Campbell
  • [U-Boot] [PATCH v2 1/3] ahci-plat: Provide a weak scsi_init hook   Ian Campbell
  • [U-Boot] [PATCH v2 1/3] ahci-plat: Provide a weak scsi_init hook   Rob Herring
  • [U-Boot] [PATCH v2 2/3] ahci: wait longer for link.   Ian Campbell
  • [U-Boot] [PATCH v2 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
  • [U-Boot] [PATCH v2 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Rob Herring
  • [U-Boot] [linux-sunxi] Re: [PATCH v2 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
  • [U-Boot] [linux-sunxi] Re: [PATCH v2 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Rob Herring
  • [U-Boot] [linux-sunxi] Re: [PATCH v2 3/3] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
• [U-Boot] u-boot(v2014.04-rc1) make tags reports find error   Nishanth Menon
  • [U-Boot] u-boot(v2014.04-rc1) make tags reports find error   Masahiro Yamada
• [U-Boot] Tegra build failure in latest master   Stephen Warren
  • [U-Boot] Tegra build failure in latest master   Albert ARIBAUD
    • [U-Boot] Tegra build failure in latest master   Stephen Warren
      • [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 01/12] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 01/12] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 02/12] tools: sort the entries in Makefile   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 02/12] tools: sort the entries in Makefile   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 03/12] tools: mkimage: add support for gpimage format   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 03/12] tools: mkimage: add support for gpimage format   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 04/12] arm: add support for arch timer   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 04/12] arm: add support for arch timer   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Scott Wood
      • [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 06/12] i2c, davinci: move i2c_defs.h to the drivers/i2c directory   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 06/12] i2c, davinci: move i2c_defs.h to the drivers/i2c directory   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 07/12] i2c, davinci: add support for multiple i2c buses   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 07/12] i2c, davinci: add support for multiple i2c buses   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 08/12] k2hk: add support for k2hk SOC and EVM   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 08/12] k2hk: add support for k2hk SOC and EVM   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 09/12] keystone2: add keystone multicore navigator driver   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 09/12] keystone2: add keystone multicore navigator driver   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 10/12] keystone2: net: add keystone ethernet driver   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 10/12] keystone2: net: add keystone ethernet driver   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 11/12] spi: davinci: add support for multiple bus and chip select   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 11/12] spi: davinci: add support for multiple bus and chip select   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 12/12] k2hk-evm: add configuration for spi1 and spi2 support   Murali Karicheri
      • [U-Boot] [U-Boot PATCH v2 12/12] k2hk-evm: add configuration for spi1 and spi2 support   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM   Karicheri, Muralidharan
      • [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM   Karicheri, Muralidharan
      • [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM   Tom Rini
• [U-Boot] Questions on adding a new type to mkimage   Charles Manning
  • [U-Boot] [PATCH] socfpga: Add a signer that is integrated into mkimage   Charles Manning
  • [U-Boot] [PATCH] socfpga: Add a signer that is integrated into mkimage   Charles Manning
  • [U-Boot] [PATCH] socfpga: Add a signer that is integrated into mkimage   Wolfgang Denk
  • [U-Boot] [PATCH v2] m68k: Remove M5271EVB and idmr board support   Masahiro Yamada
• [U-Boot] [PATCH] spi: atmel_dataflash: Simplify AT91F_SpiEnable implementation   Axel Lin
  • [U-Boot] [PATCH] kbuild: fix errors of 'make *tags' and 'make cscope'   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: fix errors of 'make *tags' and 'make cscope'   Nishanth Menon
  • [U-Boot] [PATCH] kbuild: fix errors of 'make *tags' and 'make cscope'   Masahiro Yamada
  • [U-Boot] [PATCH v3] powerpc/t2081qds: Add T2081 QDS board support   Shengzhou Liu
  • [U-Boot] [PATCH v3] powerpc/t2081qds: Add T2081 QDS board support   York Sun
  • [U-Boot] [PATCH v3] powerpc/t2081qds: Add T2081 QDS board support   York Sun
  • [U-Boot] [PATCH] kbuild: get back DTB at the top directory   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: get back DTB at the top directory   Simon Glass
  • [U-Boot] [PATCH] kbuild: get back DTB at the top directory   Masahiro Yamada
  • [U-Boot] kbuild: get back DTB at the top directory   Tom Rini
  • [U-Boot] [PATCH v2] kbuild: fix errors of 'make *tags' and 'make cscope'   Masahiro Yamada
  • [U-Boot] [U-Boot, v2] kbuild: fix errors of 'make *tags' and 'make cscope'   Tom Rini
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Lukasz Majewski
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Pantelis Antoniou
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Lukasz Majewski
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Lukasz Majewski
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Pantelis Antoniou
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Lukasz Majewski
  • [U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API   Pantelis Antoniou
  • [U-Boot] [PATCH] arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT Linux booting   Stefan Roese
  • [U-Boot] arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT Linux booting   Tom Rini
  • [U-Boot] [PATCH] powerpc/t104xrdb: Update DDR initialization related settings   Priyanka Jain
  • [U-Boot] [PATCH] powerpc/t104xrdb: Update DDR initialization related settings   York Sun
  • [U-Boot] Does mpc85xx(P2041) really need PHYLIB?   Joakim Tjernlund
    • [U-Boot] [PATCH] fs/fdos: Remove   Tom Rini
    • [U-Boot] fs/fdos: Remove   Tom Rini
  • [U-Boot] U-Boot git repo for ARC architecture   Alexey Brodkin
    • [U-Boot] [PATCH v3] socfpga: Adding Scan Manager driver   Chin Liang See
    • [U-Boot] [PATCH v3] socfpga: Adding Scan Manager driver   Pavel Machek
    • [U-Boot] [PATCH v3] socfpga: Adding Scan Manager driver   Chin Liang See
    • [U-Boot] [PATCH v2] socfpga: Adding Clock Manager driver   Chin Liang See
    • [U-Boot] [U-Boot, v5] Makefile: add a new script to check -fstack-usage support   Tom Rini
      • [U-Boot] [U-Boot, v5] Makefile: add a new script to check -fstack-usage support   Masahiro Yamada
      • [U-Boot] [PATCH v4] socfpga: Adding Scan Manager driver   Chin Liang See
      • [U-Boot] [PATCH v4] socfpga: Adding Scan Manager driver   Michal Simek
      • [U-Boot] [PATCH v4] socfpga: Adding Scan Manager driver   Chin Liang See
      • [U-Boot] [PATCH v2] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
• [U-Boot] [PATCH] arm64 patch: gicv3 support   Albert ARIBAUD
  • [U-Boot] [PATCH] arm64 patch: gicv3 support   FengHua
    • [U-Boot] [PATCH] mtd: spi: Fix page size for S25FL032P,S25FL064P   Marek Vasut
    • [U-Boot] [PATCH v3 0/6] usb: eth: introduce Moschip MCS7830 driver   Gerhard Sittig
    • [U-Boot] [PATCH v3 1/6] usb: eth: don't ifdef routine declarations in usb_ether.h   Gerhard Sittig
    • [U-Boot] [PATCH v3 2/6] usb: eth: introduce support for Moschip USB ethernet   Gerhard Sittig
    • [U-Boot] [PATCH v3 3/6] config: alpha-sort USB ethernet items for Asix and SMSC   Gerhard Sittig
    • [U-Boot] [PATCH v3 4/6] config: enable Moschip USB ethernet support for several boards   Gerhard Sittig
    • [U-Boot] [PATCH v3 5/6] config: enable USB ethernet for taskit stamp9g20   Gerhard Sittig
    • [U-Boot] [PATCH v3 6/6] usb: doc: update README.usb to list all USB ethernet options   Gerhard Sittig
    • [U-Boot] [PATCH 3/5] ubifs: return filesize from ubifs load operations   Tom Rini
    • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Tom Rini
    • [U-Boot] omap4_common: config: remove I2C for SPL mode   Tom Rini
    • [U-Boot] [U-Boot,1/3] am335x_evm: Enable GPT commands   Tom Rini
    • [U-Boot] [U-Boot,2/3] am43xx_evm: Enable GPT commands   Tom Rini
    • [U-Boot] [U-Boot,3/3] dra7xx_evm: Enable GPT commands   Tom Rini
    • [U-Boot] [U-Boot, v4, 1/1] Initial support for Silica Pengwyn board   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
    • [U-Boot] [U-Boot,2/5] ubifs: fix checkpatch warning   Tom Rini
    • [U-Boot] [U-Boot, v4, 1/2] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Tom Rini
    • [U-Boot] [U-Boot, v4, 2/2] boards.cfg: Delete the equivalent entries   Tom Rini
    • [U-Boot] common, ubi: add ubi check volumename command   Tom Rini
    • [U-Boot] common, itest: pass u-boot env variables to itest.s   Tom Rini
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Michal Simek
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Michal Simek
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Michal Simek
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Scott Wood
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
      • [U-Boot] [PATCH v2 2/2] socfpga: Adding Denali NAND driver support   Chin Liang See
      • [U-Boot] [PATCH v3 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
      • [U-Boot] [PATCH v3 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Michal Simek
      • [U-Boot] [PATCH v3 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
      • [U-Boot] [PATCH v3 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Michal Simek
      • [U-Boot] [PATCH v3 2/2] socfpga: Adding DesignWare watchdog support   Chin Liang See
      • [U-Boot] [PATCH v3 2/2] socfpga: Adding DesignWare watchdog support   Michal Simek
      • [U-Boot] [PATCH v3 2/2] socfpga: Adding DesignWare watchdog support   Chin Liang See
      • [U-Boot] [PATCH v3 2/2] socfpga: Adding DesignWare watchdog support   Michal Simek
      • [U-Boot] [PATCH v5] socfpga: Adding Scan Manager driver   Chin Liang See
      • [U-Boot] [PATCH v5] socfpga: Adding Scan Manager driver   Wolfgang Denk
      • [U-Boot] [PATCH v5] socfpga: Adding Scan Manager driver   Chin Liang See
      • [U-Boot] [PATCH] board/t104xrdb: Add support of CPLD   Prabhakar Kushwaha
      • [U-Boot] [PATCH v7 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
      • [U-Boot] [PATCH v7 2/3] arm: make _end compiler-generated   Albert ARIBAUD
      • [U-Boot] [PATCH v7 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v7 1/3] cm_t335: fix linker file to produce full ELF   Tom Rini
      • [U-Boot] [PATCH v7 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
      • [U-Boot] [PATCH v7 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
• [U-Boot] Porting a freescale sabrelite-like board to master ?   Thierry Bultel
  • [U-Boot] Porting a freescale sabrelite-like board to master ?   Wolfgang Denk
    • [U-Boot] Porting a freescale sabrelite-like board to master ?   Thierry Bultel
      • [U-Boot] Porting a freescale sabrelite-like board to master ?   Fabio Estevam
      • [U-Boot] Porting a freescale sabrelite-like board to master ?   Eric Nelson
      • [U-Boot] Porting a freescale sabrelite-like board to master ?   Wolfgang Denk
  • [U-Boot] Porting a freescale sabrelite-like board to master ?   Eric Nelson
    • [U-Boot] Porting a freescale sabrelite-like board to master ?   Yan, Miao
• [U-Boot] [PATCH v4 0/3] ubs: tegra: two fixes and cleanup   Stefan Agner
  • [U-Boot] [PATCH v4 3/3] usb: tegra: combine header file   Stefan Agner
    • [U-Boot] [PATCH v4 3/3] usb: tegra: combine header file   Stephen Warren
• [U-Boot] [PATCH v4 1/3] usb: tegra: fix USB2 powerdown for Tegra30 and later   Stefan Agner
• [U-Boot] [PATCH v4 2/3] usb: tegra: fix PHY configuration   Stefan Agner
  • [U-Boot] [PATCH] cfb_console: force natural alignment of unzipped bitmap images   Eric Nelson
  • [U-Boot] [PATCH] cfb_console: force natural alignment of unzipped bitmap images   Wolfgang Denk
  • [U-Boot] [PATCH v3] socfpga: Add a signer that is integrated into mkimage   Charles Manning
  • [U-Boot] [PATCH v3] socfpga: Add a signer that is integrated into mkimage   Wolfgang Denk
  • [U-Boot] [PATCH v3] socfpga: Add a signer that is integrated into mkimage   Charles Manning
• [U-Boot] FAT filesystem support on SPI flash   Vasili Galka
  • [U-Boot] FAT filesystem support on SPI flash   Wolfgang Denk
    • [U-Boot] FAT filesystem support on SPI flash   Vasili Galka
    • [U-Boot] FAT filesystem support on SPI flash   Jagan Teki
    • [U-Boot] FAT filesystem support on SPI flash   Vasili Galka
    • [U-Boot] FAT filesystem support on SPI flash   Tom Rini
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Wolfgang Denk
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Wolfgang Denk
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Wolfgang Denk
    • [U-Boot] [PATCH v4] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v5] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v5] socfpga: Add socfpga preloader signing to mkimage   Michal Simek
    • [U-Boot] [PATCH v5] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v5] socfpga: Add socfpga preloader signing to mkimage   Dinh Nguyen
    • [U-Boot] [PATCH v6] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v6] socfpga: Add socfpga preloader signing to mkimage   Wolfgang Denk
    • [U-Boot] [PATCH v6] socfpga: Add socfpga preloader signing to mkimage   Charles Manning
    • [U-Boot] [PATCH v6] socfpga: Add socfpga preloader signing to mkimage   Chin Liang See
• [U-Boot] [PATCH 1/7 V5] mmc: Add some usefull macro definition   Zhang Haijun
  • [U-Boot] [PATCH v2 0/15] Follow-up for Kbuild series: more misc targets and short logs   Masahiro Yamada
  • [U-Boot] [PATCH v2 08/15] kbuild: use shorten logs for cat rules   Masahiro Yamada
  • [U-Boot] [PATCH v2 11/15] kbuild: use shorten logs for misc targets   Masahiro Yamada
  • [U-Boot] [PATCH v2 0/15] Follow-up for Kbuild series: more misc targets and short logs   Tom Rini
  • [U-Boot] [PATCH v2 01/15] kbuild: consolidate version and timestamp headers generation   Masahiro Yamada
  • [U-Boot] [PATCH v2 02/15] kbuild: abolish "depend" target   Masahiro Yamada
  • [U-Boot] [PATCH v2 03/15] kbuild: move asm-offsets.h rules to ./Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v2 03/15] kbuild: move asm-offsets.h rules to ./Kbuild   Wolfgang Denk
  • [U-Boot] [PATCH v2 03/15] kbuild: move asm-offsets.h rules to ./Kbuild   Masahiro Yamada
  • [U-Boot] [PATCH v2 03/15] kbuild: move asm-offsets.h rules to ./Kbuild   Tom Rini
  • [U-Boot] [PATCH v2 04/15] kbuild: rename OBJCFLAGS to OBJCOPYFLAGS   Masahiro Yamada
  • [U-Boot] [PATCH v2 05/15] kbuild: Add $(Q) when descending into subdirectories   Masahiro Yamada
  • [U-Boot] [PATCH v2 06/15] kbuild: use shorten logs objcopy rules   Masahiro Yamada
  • [U-Boot] [PATCH v2 07/15] kbuild: use shorten logs for mkimage rules   Masahiro Yamada
  • [U-Boot] [PATCH v2 09/15] kbuild: use shorten logs for combined rules of mkimage, padding and cat   Masahiro Yamada
  • [U-Boot] [PATCH v2 10/15] kbuild: use shorten log for linking u-boot   Masahiro Yamada
  • [U-Boot] [PATCH v2 12/15] kbuild: use shorten logs for IMX images   Masahiro Yamada
  • [U-Boot] [PATCH v2 13/15] kbuild: refactor more IMX image rules   Masahiro Yamada
  • [U-Boot] [PATCH v2 14/15] kbuild: support building signle targets   Masahiro Yamada
  • [U-Boot] [PATCH v2 15/15] kbuild: add misc targets, help, ubootrelease, ubootversion   Masahiro Yamada
• [U-Boot] test   Yuantian Tang
• [U-Boot] [PATCH v2 1/6] net: emaclite: Fix OF initialization   Michal Simek
  • [U-Boot] [PATCH v2 3/6] net: gem: Add OF initialization support   Michal Simek
  • [U-Boot] [PATCH v2 5/6] zynq: Add OF ram initialization support   Michal Simek
  • [U-Boot] [PATCH v2 6/6] serial: zynq: Add OF initialization support   Michal Simek
• [U-Boot] [PATCH v2 2/6] zynq: Do not use SPL OF initialization   Michal Simek
• [U-Boot] [PATCH v2 4/6] mmc: zynq: Add OF initialization support   Michal Simek
  • [U-Boot] [PATCH] kbuild: fix SPL link bug when USE_PRIVATE_LIBGCC is "yes"   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: fix SPL link bug when USE_PRIVATE_LIBGCC is "yes"   Stephen Warren
  • [U-Boot] [PATCH] kbuild: fix SPL link bug when USE_PRIVATE_LIBGCC is "yes"   Masahiro Yamada
  • [U-Boot] kbuild: fix SPL link bug when USE_PRIVATE_LIBGCC is "yes"   Tom Rini
  • [U-Boot] [PATCH] power: fix: Do not execute pmic command when not all necessary parameters are passed   Lukasz Majewski
  • [U-Boot] power: fix: Do not execute pmic command when not all necessary parameters are passed   Tom Rini
  • [U-Boot] [PATCH] x86: coreboot: delete unused coreboot/config.mk   Masahiro Yamada
  • [U-Boot] x86: coreboot: delete unused coreboot/config.mk   Tom Rini
  • [U-Boot] [PATCH] x86: coreboot: delete unused coreboot/config.mk   Simon Glass
  • [U-Boot] [PATCH] x86: coreboot: delete unused coreboot/config.mk   Vadim Bendebury
  • [U-Boot] [PATCH] arm: delete unused macro CONFIG_ARCH_DEVICE_TREE   Masahiro Yamada
  • [U-Boot] [PATCH] arm: delete unused macro CONFIG_ARCH_DEVICE_TREE   Stephen Warren
  • [U-Boot] [PATCH] arm: delete unused macro CONFIG_ARCH_DEVICE_TREE   Masahiro Yamada
  • [U-Boot] arm: delete unused macro CONFIG_ARCH_DEVICE_TREE   Tom Rini
  • [U-Boot] [PATCH 0/2] Kbuild: Fix a false error of sanity check   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] kbuild: Fix a false error of generic board support   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] kbuild: Move linker sciript check to prepare1   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] kbuild: Move linker sciript check to prepare1   Simon Glass
  • [U-Boot] [PATCH] boards.cfg: Keep arc entries sorted   Fabio Estevam
  • [U-Boot] boards.cfg: Keep arc entries sorted   Tom Rini
• [U-Boot] u-boot.dtb vs. dts/dt.dtb output filename, also O= vs BUILD_DIR=   Stephen Warren
  • [U-Boot] u-boot.dtb vs. dts/dt.dtb output filename, also O= vs BUILD_DIR=   Tom Rini
  • [U-Boot] u-boot.dtb vs. dts/dt.dtb output filename, also O= vs BUILD_DIR=   Masahiro Yamada
    • [U-Boot] u-boot.dtb vs. dts/dt.dtb output filename, also O= vs BUILD_DIR=   Stephen Warren
• [U-Boot] [PATCH] powerpc/usb: Workaround for erratum-A006261   York Sun
• [U-Boot] [PATCH 2/2] powerpc/t1040qds: Add Video - HDMI support   York Sun
• [U-Boot] [PATCH 1/2] powerpc/t208x: some update to support t2081   York Sun
• [U-Boot] [PATCH 1/4 v2] SPL: powerpc: expand SPL's length to 128K   York Sun
• [U-Boot] [PATCH 3/4 v2] SPL: P1022DS: fix the problem booting from spi flash   York Sun
• [U-Boot] [PATCH 2/4 v2] SPL: P2020RDB: fix the problem booting from spi flash   York Sun
• [U-Boot] [PATCH 4/4 v2] powerpc: p1010rdb: Enable p1010rdb to start from NAND/SD/SPI flash with SPL   York Sun
• [U-Boot] [PATCH] ar8031/8033/phy:enable autonegotiation for ar8031/8033   York Sun
  • [U-Boot] [PATCH] ar8031/8033/phy:enable autonegotiation for ar8031/8033   Joe Hershberger
  • [U-Boot] [PATCH] arm: omap: delete unincluded omap-common/config.mk   Masahiro Yamada
  • [U-Boot] arm: omap: delete unincluded omap-common/config.mk   Tom Rini
  • [U-Boot] [PATCH][v2] board/t104xrdb: Add support of CPLD   Prabhakar Kushwaha
  • [U-Boot] about am335x watchdog   Yan, Miao
    • [U-Boot] [PATCH] arm: am335x: DXR2: Reset SMSC LAN9303 switch via GPIO upon bootup   Stefan Roese
    • [U-Boot] [PATCH v2 0/2] Kbuild: Fix a false error of sanity check   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/2] kbuild: Fix a false error of generic board support   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/2] kbuild: Fix a false error of generic board support   Simon Glass
    • [U-Boot] [PATCH v2 2/2] kbuild: Move linker sciript check to prepare1   Masahiro Yamada
    • [U-Boot] [PATCH v2 0/2] Kbuild: Fix a false error of sanity check   Tom Rini
    • [U-Boot] [U-Boot, v5] Makefile: add a new script to check -fstack-usage support   Tom Rini
      • [U-Boot] [PATCH V3 00/12] Exynos4: add support for device tree   Piotr Wilczek
      • [U-Boot] [PATCH V3 01/12] exynos4:pinmux:fdt: decode peripheral id   Piotr Wilczek
      • [U-Boot] [PATCH V3 02/12] video:mipidsim:fdt: Add DT support for mipi dsim driver   Piotr Wilczek
      • [U-Boot] [PATCH V3 02/12] video:mipidsim:fdt: Add DT support for mipi dsim driver   Ajay kumar
      • [U-Boot] [PATCH V3 02/12] video:mipidsim:fdt: Add DT support for mipi dsim driver   Piotr Wilczek
      • [U-Boot] [PATCH V3 03/12] video:exynos_fb:fdt: add additional fdt data   Piotr Wilczek
      • [U-Boot] [PATCH V3 03/12] video:exynos_fb:fdt: add additional fdt data   Ajay kumar
      • [U-Boot] [PATCH V3 04/12] drivers:mmc:sdhci: enable support for DT   Piotr Wilczek
      • [U-Boot] [PATCH V3 05/12] board:samsung: move checkboard to common file   Piotr Wilczek
      • [U-Boot] [PATCH V3 06/12] arm:exynos: add common DTS file for exynos 4   Piotr Wilczek
      • [U-Boot] [PATCH V3 07/12] board:samsung:common: move max77686 init function   Piotr Wilczek
      • [U-Boot] [PATCH V3 08/12] arm:exynos: enable sdhci and misc_init to common board   Piotr Wilczek
      • [U-Boot] [PATCH V3 09/12] board:origen: Enable device tree on Origen   Piotr Wilczek
      • [U-Boot] [PATCH V3 09/12] board:origen: Enable device tree on Origen   Minkyu Kang
      • [U-Boot] [PATCH V3 10/12] board:universal: Enable device tree on Universal   Piotr Wilczek
      • [U-Boot] [PATCH V3 11/12] board:trats: Enable device tree on Trats   Piotr Wilczek
      • [U-Boot] [PATCH V3 12/12] board:trats2: Enable device tree on Trats2   Piotr Wilczek
      • [U-Boot] [PATCH v3 1/2] checkpatch.pl: Add warning for new __packed additions   Tom Rini
      • [U-Boot] [PATCH v3 2/2] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
• [U-Boot] [PATCH] ar8031/8033/phy:enable autonegotiation for ar8031/8033   York Sun
• [U-Boot] Please pull u-boot-mpc85xx.git master   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx.git master   Tom Rini
  • [U-Boot] [PATCH] fix: trats: clock setup: enable all clocks in clk_gate_block.   Przemyslaw Marczak
  • [U-Boot] [PATCH] fix: trats: clock setup: enable all clocks in clk_gate_block.   Tom Rini
  • [U-Boot] [PATCH] fix: trats: clock setup: enable all clocks in clk_gate_block.   Przemyslaw Marczak
  • [U-Boot] [PATCH] kbuild: post: fix dependency tracking correctly   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: post: fix dependency tracking correctly   Simon Glass
  • [U-Boot] [PATCH][v2] powerpc/t104xrdb: Update DDR initialization related settings   Priyanka Jain
  • [U-Boot] [PATCH 0/8] Kbuild: A collection of trivial refactoring   Masahiro Yamada
  • [U-Boot] [PATCH 1/8] config.mk: Delete unused variable BCURDIR   Masahiro Yamada
  • [U-Boot] [PATCH 2/8] Makefile: delete unused variable LDSCRIPT_MAKEFILE_DIR   Masahiro Yamada
  • [U-Boot] [PATCH 3/8] nand_spl: simpc8313: move config.mk used only for nand_spl   Masahiro Yamada
  • [U-Boot] [PATCH 4/8] x86: Delete redundant compiler flags   Masahiro Yamada
  • [U-Boot] [PATCH 4/8] x86: Delete redundant compiler flags   Simon Glass
  • [U-Boot] [PATCH 5/8] sh: Do not define -ffreestanding twice   Masahiro Yamada
  • [U-Boot] [PATCH 5/8] sh: Do not define -ffreestanding twice   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 5/8] sh: Do not define -ffreestanding twice   Masahiro Yamada
  • [U-Boot] [PATCH 6/8] sh: merge compiler flag -ffixed-r13   Masahiro Yamada
  • [U-Boot] [PATCH 6/8] sh: merge compiler flag -ffixed-r13   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 7/8] m68k: merge compile flags -ffixed-d7 -sep-data   Masahiro Yamada
  • [U-Boot] [PATCH 8/8] arm64: Do not double -mstrict-align option   Masahiro Yamada
  • [U-Boot] [PATCH 8/8] arm64: Do not double -mstrict-align option   Tom Rini
  • [U-Boot] [PATCH 8/8] arm64: Do not double -mstrict-align option   Albert ARIBAUD
  • [U-Boot] [PATCH 8/8] arm64: Do not double -mstrict-align option   Tom Rini
  • [U-Boot] [PATCH 8/8] arm64: Do not double -mstrict-align option   Albert ARIBAUD
  • [U-Boot] [PATCH 0/8] Kbuild: A collection of trivial refactoring   Tom Rini
• [U-Boot] Question about Zynq SPL   Masahiro Yamada
  • [U-Boot] Question about Zynq SPL   Michal Simek
    • [U-Boot] Question about Zynq SPL   Masahiro Yamada
      • [U-Boot] Question about Zynq SPL   Michal Simek
      • [U-Boot] Question about Zynq SPL   Masahiro Yamada
      • [U-Boot] [RFC PATCH] nand_spl: display warning message to inform the end of nand_spl   Masahiro Yamada
      • [U-Boot] [RFC PATCH] nand_spl: display warning message to inform the end of nand_spl   Tom Rini
      • [U-Boot] [RFC PATCH] nand_spl: display warning message to inform the end of nand_spl   Stefan Roese
      • [U-Boot] [RFC PATCH] nand_spl: display warning message to inform the end of nand_spl   Tom Rini
      • [U-Boot] [PATCH v2] powerpc/usb: Workaround for erratum-A006261   Suresh Gupta
      • [U-Boot] [PATCH] board/b4860qds: Add support to make Aurora work on B4860QDS   Shaveta Leekha
      • [U-Boot] [PATCH] board/b4860qds: Add support to make PCIe SATA work on B4860QDS   Shaveta Leekha
      • [U-Boot] [PATCH 1/2] B4860/B4420: Add PLL_NUM define for B4420/B4860 to use SerDes2 Refclks re-configuration   Shaveta Leekha
      • [U-Boot] [PATCH 2/2] B4860qds: Set SerDes2 refclk2 at to 156.25MHz for XFI to work   Shaveta Leekha
      • [U-Boot] [PATCH] powerpc/b4860: Add workaround for errata A006384 and A006475   Shaveta Leekha
      • [U-Boot] [PATCH][v2] powerpc/t1040qds: Add Video - HDMI support   Priyanka Jain
      • [U-Boot] [PATCH][v2] powerpc/t1040qds: Add Video - HDMI support   Priyanka Jain
    • [U-Boot] env variable in linux   shobin b
      • [U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A007075   Nikhil Badola
      • [U-Boot] [PATCH] sizes.h - consolidate for all architectures   Alexey Brodkin
      • [U-Boot] [PATCH] sizes.h - consolidate for all architectures   Tom Rini
      • [U-Boot] [PATCH] sizes.h - consolidate for all architectures   Stefan Roese
      • [U-Boot] [PATCH v2] libfdt: Fix segfault when calling fit_check_format() on corrupt FIT images   Tom Rini
      • [U-Boot] [RFC] mmc: Remove ops from struct mmc and put in mmc_ops   Pantelis Antoniou
      • [U-Boot] [RFC] mmc: Remove ops from struct mmc and put in mmc_ops   Rommel G Custodio
      • [U-Boot] [RFC] mmc: Remove ops from struct mmc and put in mmc_ops   Tom Rini
      • [U-Boot] [RFC] mmc: Remove ops from struct mmc and put in mmc_ops   Tom Rini
    • [U-Boot] [PATCH 2/2] env export fix: compute the CRC on the real lenght of the exported variables.   Tom Rini
      • [U-Boot] [Patch v2 1/3] armv8/cache: Consolidate setting for MAIR and TCR   York Sun
      • [U-Boot] [Patch v2 1/3] armv8/cache: Consolidate setting for MAIR and TCR   Albert ARIBAUD
      • [U-Boot] [Patch v2 1/3] armv8/cache: Consolidate setting for MAIR and TCR   York Sun
      • [U-Boot] [Patch v2 1/3] armv8/cache: Consolidate setting for MAIR and TCR   Albert ARIBAUD
      • [U-Boot] [Patch v2 2/3] armv8/cache: Flush D-cache, invalidate I-cache for relocation   York Sun
      • [U-Boot] [Patch v2 3/3] armv8/cache: Change cache invalidate and flush function   York Sun
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] [PATCH v9 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
  • [U-Boot] [PATCH v9 01/14] sandbox: Build a device tree file for sandbox   Simon Glass
  • [U-Boot] [PATCH v9 02/14] Add cmd_process_error() to report and process errors   Simon Glass
  • [U-Boot] [PATCH v9 03/14] yaffs: Remove private list implementation   Simon Glass
  • [U-Boot] [PATCH v9 04/14] dm: Add README for driver model   Simon Glass
  • [U-Boot] [PATCH v9 05/14] dm: Add base driver model support   Simon Glass
  • [U-Boot] [PATCH v9 06/14] sandbox: config: Enable driver model   Simon Glass
  • [U-Boot] [PATCH v9 07/14] dm: Set up driver model after relocation   Simon Glass
  • [U-Boot] [PATCH v9 08/14] dm: Add basic tests   Simon Glass
  • [U-Boot] [PATCH v9 09/14] dm: Add a 'dm' command for testing   Simon Glass
  • [U-Boot] [PATCH v9 10/14] dm: Add a demonstration/example driver   Simon Glass
  • [U-Boot] [PATCH v9 11/14] dm: Add GPIO support and tests   Simon Glass
  • [U-Boot] [PATCH v9 12/14] sandbox: Convert GPIOs to use driver model   Simon Glass
  • [U-Boot] [PATCH v9 13/14] dm: Enable gpio command to support driver model   Simon Glass
  • [U-Boot] [PATCH v9 14/14] dm: Remove old driver model documentation   Simon Glass
  • [U-Boot] [PATCH v9 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
  • [U-Boot] [PATCH] Add 64-bit data support for memory commands   York Sun
• [U-Boot] 16 bit I2c read write on omap4 ?   Vikram Singh Shekhawat
  • [U-Boot] [PATCH] hush: when a variable expansion is empty, don't drop the parameter   Stephen Warren
  • [U-Boot] [PATCH] hush: when a variable expansion is empty, don't drop the parameter   Russell King - ARM Linux
  • [U-Boot] [PATCH] hush: when a variable expansion is empty, don't drop the parameter   Russell King - ARM Linux
  • [U-Boot] start address loading initrd in ram on arm   Joren Bultheel
    • [U-Boot] start address loading initrd in ram on arm   Tom Rini
    • [U-Boot] start address loading initrd in ram on arm   Joren Bultheel
    • [U-Boot] start address loading initrd in ram on arm   Tom Rini
    • [U-Boot] start address loading initrd in ram on arm   Joren Bultheel
• [U-Boot] U-Boot: could not cross-compile u-boot tools   Heiko Schocher
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Tom Rini
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Heiko Schocher
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Masahiro Yamada
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Heiko Schocher
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Wolfgang Denk
  • [U-Boot] U-Boot: could not cross-compile u-boot tools   Tom Rini
  • [U-Boot] [PATCH] scripts: update checkpatch.pl to latest upstream version   Tom Rini
  • [U-Boot] [PATCH] kbuild: consolidate PLATFORM_LIBS   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: consolidate PLATFORM_LIBS   Tom Rini
  • [U-Boot] [PATCH V3 03/12] video:exynos_fb:fdt: add additional fdt data   Ajay kumar
  • [U-Boot] [PATCH V3 03/12] video:exynos_fb:fdt: add additional fdt data   Piotr Wilczek
  • [U-Boot] [PATCH 0/4] Big acceleration of Kbuild performance   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] kbuild, blackfin: Add CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED   Masahiro Yamada
  • [U-Boot] [PATCH 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBS   Masahiro Yamada
  • [U-Boot] [PATCH 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBS   Stephen Warren
  • [U-Boot] [PATCH 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBS   Masahiro Yamada
  • [U-Boot] [PATCH 3/4] config.mk: specify the exact path to standalone linker script   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] kbuild: improve Kbuild speed   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] kbuild: improve Kbuild speed   Simon Glass
  • [U-Boot] [PATCH 0/4] Big acceleration of Kbuild performance   Tom Rini
  • [U-Boot] [PATCH 0/4] Big acceleration of Kbuild performance   Stephen Warren
  • [U-Boot] [PATCH 0/4] Big acceleration of Kbuild performance   Masahiro Yamada
  • [U-Boot] [PATCH v6] socfpga: Adding Scan Manager driver   Chin Liang See
  • [U-Boot] [PATCH v6] socfpga: Adding Scan Manager driver   Michal Simek
  • [U-Boot] Ethernet persistence   Anthony Mahar
    • [U-Boot] Ethernet persistence   Michal Simek
    • [U-Boot] Ethernet persistence   Simon Glass
      • [U-Boot] Ethernet persistence   Michal Simek
      • [U-Boot] Ethernet persistence   Scott Wood
      • [U-Boot] [PATCH v3] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Scott Wood
  • [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
    • [U-Boot] [PATCH v4 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
    • [U-Boot] [PATCH v4 1/2] watchdog/denali: Adding DesignWare watchdog driver support   Michal Simek
    • [U-Boot] [PATCH v2 0/31] Add additional sandbox features and infrastructure   Simon Glass
    • [U-Boot] [PATCH v2 01/31] Use a const pointer for map_to_sysmem()   Simon Glass
    • [U-Boot] [PATCH v2 02/31] sandbox: Increase memory size to 32MB   Simon Glass
    • [U-Boot] [PATCH v2 03/31] sandbox: Build a device tree file for sandbox   Simon Glass
    • [U-Boot] [PATCH v2 04/31] sandbox: Use os functions to read host device tree   Simon Glass
    • [U-Boot] [PATCH v2 05/31] sandbox: dts: Add display and keyboard to sandbox   Simon Glass
    • [U-Boot] [PATCH v2 06/31] cros_ec: Add an enum for the number of flash regions   Simon Glass
    • [U-Boot] [PATCH v2 07/31] cros_ec: Add a function for reading a flash map entry   Simon Glass
    • [U-Boot] [PATCH v2 08/31] cros_ec: Move EC interface into common library   Simon Glass
    • [U-Boot] [PATCH v2 09/31] cros_ec: Add a function for decoding the Chrome OS EC flashmap   Simon Glass
    • [U-Boot] [PATCH v2 10/31] cros_ec: Drop old EC version support from EC driver   Simon Glass
    • [U-Boot] [PATCH v2 11/31] cros_ec: Support systems with no EC interrupt   Simon Glass
    • [U-Boot] [PATCH v2 12/31] cros_ec: Move #ifdef to permit flash region access   Simon Glass
    • [U-Boot] [PATCH v2 13/31] cros_ec: Sync up with latest Chrome OS EC version   Simon Glass
    • [U-Boot] [PATCH v2 14/31] cros_ec: Clean up multiple EC protocol support   Simon Glass
    • [U-Boot] [PATCH v2 15/31] cros_ec: Add base support for protocol v3   Simon Glass
    • [U-Boot] [PATCH v2 16/31] cros_ec: spi: Add support for EC protocol version 3   Simon Glass
    • [U-Boot] [PATCH v2 17/31] cros_ec: Correct comparison between signed and unsigned numbers   Simon Glass
    • [U-Boot] [PATCH v2 18/31] cros_ec: sandbox: Add Chrome OS EC emulation   Simon Glass
    • [U-Boot] [PATCH v2 19/31] sandbox: Plumb in Chrome OS EC emulation   Simon Glass
    • [U-Boot] [PATCH v2 20/31] cros_ec: Implement I2C pass-through   Simon Glass
    • [U-Boot] [PATCH v2 21/31] sandbox: Add os_jump_to_image() to run another executable   Simon Glass
    • [U-Boot] [PATCH v2 22/31] sandbox: Add -j option to indicate a jump from a previous U-Boot   Simon Glass
    • [U-Boot] [PATCH v2 23/31] sandbox: Add SDL library for LCD, keyboard, audio   Simon Glass
    • [U-Boot] [PATCH v2 24/31] sandbox: Add a simple sound driver   Simon Glass
    • [U-Boot] [PATCH v2 25/31] sandbox: Add LCD driver   Simon Glass
    • [U-Boot] [PATCH v2 26/31] sound: Move Samsung-specific code into its own file   Simon Glass
    • [U-Boot] [PATCH v2 27/31] sandbox: Deal with conflicting getenv() for SDL   Simon Glass
    • [U-Boot] [PATCH v2 28/31] sandbox: Allow Ctrl-C to work in sandbox   Simon Glass
    • [U-Boot] [PATCH v2 29/31] sandbox: Add options to clean up temporary files   Simon Glass
    • [U-Boot] [PATCH v2 30/31] sandbox: Add implementation of spi_setup_slave_fdt()   Simon Glass
    • [U-Boot] [PATCH v2 31/31] sandbox: config: Enable cros_ec emulation and related items   Simon Glass
    • [U-Boot] [PATCH] net: asix: don't pad odd-length TX packets   Stephen Warren
    • [U-Boot] [PATCH] net: asix: don't pad odd-length TX packets   Simon Glass
    • [U-Boot] [PATCH] net: asix: don't pad odd-length TX packets   Marek Vasut
• [U-Boot] [PATCH 2/3] mtd: nand: atmel: prepare for nand spl boot support   Scott Wood
  • [U-Boot] [PATCH][v3] board/t104xrdb: Add support of CPLD   Prabhakar Kushwaha
  • [U-Boot] [PATCH v2 0/4] Big acceleration of Kbuild performance   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/4] kbuild, blackfin: Add CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC   Masahiro Yamada
  • [U-Boot] [PATCH v2 3/4] config.mk: specify the exact path to standalone linker script   Masahiro Yamada
  • [U-Boot] [PATCH v2 4/4] kbuild: improve Kbuild speed   Masahiro Yamada
  • [U-Boot] [RESEND PATCH v2 0/4] Big acceleration of Kbuild performance   Masahiro Yamada
  • [U-Boot] [RESEND PATCH v2 2/4] kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC   Masahiro Yamada
  • [U-Boot] [RESEND PATCH v2 1/4] kbuild, blackfin: Add CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED   Masahiro Yamada
  • [U-Boot] [RESEND PATCH v2 3/4] config.mk: specify the exact path to standalone linker script   Masahiro Yamada
  • [U-Boot] [RESEND PATCH v2 4/4] kbuild: improve Kbuild speed   Masahiro Yamada
  • [U-Boot] [PATCH V2] hush: fix some quoted variable expansion issues   Stephen Warren
  • [U-Boot] [PATCH] unit-test: clean up evironment after Hush tests   Stephen Warren
  • [U-Boot] [PATCH] kbuild: fix CROSS_COMPILE settings in config.mk   Masahiro Yamada
• [U-Boot] Secure booting   JYOTI DUBEY
  • [U-Boot] [PATCH] video: ipu_disp: wait for DP SF end irq when disabling sync BG flows   Liu Ying
  • [U-Boot] [PATCH] board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config   Prabhakar Kushwaha
  • [U-Boot] [PATCH 1/6] powerpc/mpc85xx: Avoid hardcoding in SPL linker script   Prabhakar Kushwaha
  • [U-Boot] [PATCH 0/6][v2] powerpc: Add support 2 stage boot loader for corenet platform   Prabhakar Kushwaha
  • [U-Boot] [PATCH 2/6] powerpc:Add support of SPL non-relocation   Prabhakar Kushwaha
  • [U-Boot] [PATCH 3/6] powerpc/mpc8xxx:Allow Parsing of LAW table in both SPL & non SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH 4/6] driver/ifc: define nand_spl_load_image() for SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH 5/6] Makefile: Add support of RAMBOOT_SPLPBL   Prabhakar Kushwaha
  • [U-Boot] [PATCH 6/6] B4860QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
• [U-Boot] Writing to SD partitions from u-boot   David Cemin
  • [U-Boot] Writing to SD partitions from u-boot   Wolfgang Denk
    • [U-Boot] Writing to SD partitions from u-boot   David Cemin
    • [U-Boot] [PATCH] powerpc/t2080rdb: Add T2080PCIe-RDB board support   Shengzhou Liu
    • [U-Boot] [PATCH] powerpc/t2080rdb: Add T2080PCIe-RDB board support   York Sun
    • [U-Boot] [PATCH] board: gaisler: delete unnecessary include path   Masahiro Yamada
    • [U-Boot] [PATCH] cosmetic: boards.cfg: mark dead email addresses   Masahiro Yamada
    • [U-Boot] [PATCH] cosmetic: boards.cfg: mark dead email addresses   Tom Rini
    • [U-Boot] [PATCH] board: .gitignore: ignore board-specific generated files   Masahiro Yamada
    • [U-Boot] [PATCH 1/2 v2] mpc85xx: Add support for the supplement configuration unit register   Yuantian.Tang at freescale.com
    • [U-Boot] [PATCH 2/2 v2] mpc85xx/t104x: Add deep sleep framework support   Yuantian.Tang at freescale.com
    • [U-Boot] [PATCH] board: config.mk: delete unused sinclude directive   Masahiro Yamada
• [U-Boot] [PATCH 0/3] samsung: misc: add new lcd menu options   Przemyslaw Marczak
  • [U-Boot] [PATCH 1/3] samsung: misc: check_keys(), key_pressed() - remove type static.   Przemyslaw Marczak
  • [U-Boot] [PATCH 2/3] samsung: misc: add gpt restore option to lcd menu   Przemyslaw Marczak
  • [U-Boot] [PATCH 3/3] samsung: misc: add env default option to lcd menu   Przemyslaw Marczak
  • [U-Boot] [PATCH 0/3] samsung: misc: add new lcd menu options   Przemyslaw Marczak
  • [U-Boot] Writing to SD partitions from u-boot   Wolfgang Denk
• [U-Boot] [PATCH 1/2] lib: uuid: add function to generate UUID version 4   Przemyslaw Marczak
  • [U-Boot] [PATCH 1/2] lib: uuid: add function to generate UUID version 4   Stephen Warren
• [U-Boot] [PATCH 2/2] cmd:gpt: randomly generate each partition uuid if undefined   Przemyslaw Marczak
  • [U-Boot] [PATCH 2/2] cmd:gpt: randomly generate each partition uuid if undefined   Stephen Warren
• [U-Boot] [PATCH 1/3] cpu: exynos4: ace_sha: add hardware random number generator support.   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] lib: rand: add call to hw_rand() - hardware random number generator   Przemyslaw Marczak
  • [U-Boot] [PATCH 2/3] lib: rand: add call to hw_rand() - hardware random number generator   Michael Walle
• [U-Boot] [PATCH 3/3] trats/trats2: enable exynos security subsystem and function hw_rand()   Przemyslaw Marczak
  • [U-Boot] [PATCH] Trats/Trats2: Update Tizen partitions layout and dfu entities   Przemyslaw Marczak
  • [U-Boot] [PATCH] usb: dfu: add static alt num count in dfu_config_entities()   Przemyslaw Marczak
• [U-Boot] Writing to SD partitions from u-boot   Wolfgang Denk
• [U-Boot] Licensing Question on ARM Semihosting Code   Darwin Rambo
  • [U-Boot] Licensing Question on ARM Semihosting Code   Tom Rini
  • [U-Boot] Licensing Question on ARM Semihosting Code   Måns Rullgård
    • [U-Boot] [PATCH V2] cfb_console: force natural alignment of 32-bit fields in gzipped .bmp files   Eric Nelson
    • [U-Boot] [PATCH V2] cfb_console: force natural alignment of 32-bit fields in gzipped .bmp files   Wolfgang Denk
    • [U-Boot] [PATCH V2] cfb_console: force natural alignment of 32-bit fields in gzipped .bmp files   Eric Nelson