[U-Boot] [PATCH v2 26/31] sound: Move Samsung-specific code into its own file
Simon Glass
sjg at chromium.org
Thu Feb 27 21:26:20 CET 2014
The i2s code is in fact Samsung-specific, but there might be other
implementation. Move this code into its own file. This makes it slightly
more obviously how to adjust the code to support another SoC, when someone
takes this task on.
Also drop non-FDT support, since it isn't used on Exynos 5.
Tested-by: Che-Liang Chiou <clchiou at chromium.org>
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/sound/Makefile | 2 +-
drivers/sound/sound-i2s.c | 208 +++++++++++++++++++++++++++++++++++++
drivers/sound/sound.c | 221 +---------------------------------------
include/configs/exynos5250-dt.h | 1 +
include/sound.h | 9 ++
5 files changed, 220 insertions(+), 221 deletions(-)
create mode 100644 drivers/sound/sound-i2s.c
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 3793f8a..981ed61 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -6,7 +6,7 @@
#
obj-$(CONFIG_SOUND) += sound.o
-obj-$(CONFIG_I2S) += samsung-i2s.o
+obj-$(CONFIG_I2S) += sound-i2s.o
obj-$(CONFIG_I2S_SAMSUNG) += samsung-i2s.o
obj-$(CONFIG_SOUND_SANDBOX) += sandbox.o
obj-$(CONFIG_SOUND_WM8994) += wm8994.o
diff --git a/drivers/sound/sound-i2s.c b/drivers/sound/sound-i2s.c
new file mode 100644
index 0000000..749bbbd
--- /dev/null
+++ b/drivers/sound/sound-i2s.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar at samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <malloc.h>
+#include <common.h>
+#include <asm/io.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include <asm/arch/sound.h>
+#include "wm8994.h"
+#include "max98095.h"
+
+/* defines */
+#define SOUND_400_HZ 400
+#define SOUND_BITS_IN_BYTE 8
+
+static struct i2stx_info g_i2stx_pri;
+
+/*
+ * get_sound_i2s_values gets values for i2s parameters
+ *
+ * @param i2stx_info i2s transmitter transfer param structure
+ * @param blob FDT blob if enabled else NULL
+ */
+static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
+{
+ int node;
+ int error = 0;
+ int base;
+
+ node = fdt_path_offset(blob, "i2s");
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
+ return -1;
+ }
+
+ /*
+ * Get the pre-defined sound specific values from FDT.
+ * All of these are expected to be correct otherwise
+ * wrong register values in i2s setup parameters
+ * may result in no sound play.
+ */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (base == FDT_ADDR_T_NONE) {
+ debug("%s: Missing i2s base\n", __func__);
+ return -1;
+ }
+ i2s->base_address = base;
+
+ i2s->audio_pll_clk = fdtdec_get_int(blob,
+ node, "samsung,i2s-epll-clock-frequency", -1);
+ error |= i2s->audio_pll_clk;
+ debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
+ i2s->samplingrate = fdtdec_get_int(blob,
+ node, "samsung,i2s-sampling-rate", -1);
+ error |= i2s->samplingrate;
+ debug("samplingrate = %d\n", i2s->samplingrate);
+ i2s->bitspersample = fdtdec_get_int(blob,
+ node, "samsung,i2s-bits-per-sample", -1);
+ error |= i2s->bitspersample;
+ debug("bitspersample = %d\n", i2s->bitspersample);
+ i2s->channels = fdtdec_get_int(blob,
+ node, "samsung,i2s-channels", -1);
+ error |= i2s->channels;
+ debug("channels = %d\n", i2s->channels);
+ i2s->rfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-lr-clk-framesize", -1);
+ error |= i2s->rfs;
+ debug("rfs = %d\n", i2s->rfs);
+ i2s->bfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-bit-clk-framesize", -1);
+ error |= i2s->bfs;
+ debug("bfs = %d\n", i2s->bfs);
+
+ i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
+ error |= i2s->id;
+ debug("id = %d\n", i2s->id);
+
+ if (error == -1) {
+ debug("fail to get sound i2s node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Init codec
+ *
+ * @param blob FDT blob
+ * @param pi2s_tx i2s parameters required by codec
+ * @return int value, 0 for success
+ */
+static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
+{
+ int ret;
+ const char *codectype;
+ int node;
+
+ /* Get the node from FDT for sound */
+ node = fdt_path_offset(blob, "i2s");
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+
+ /*
+ * Get the pre-defined sound codec specific values from FDT.
+ * All of these are expected to be correct otherwise sound
+ * can not be played
+ */
+ codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
+ debug("device = %s\n", codectype);
+ if (!strcmp(codectype, "wm8994")) {
+ /* Check the codec type and initialise the same */
+ ret = wm8994_init(blob, pi2s_tx->id + 1,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample, pi2s_tx->channels);
+ } else if (!strcmp(codectype, "max98095")) {
+ ret = max98095_init(blob, pi2s_tx->id + 1,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample);
+ } else {
+ debug("%s: Unknown codec type %s\n", __func__, codectype);
+ return -1;
+ }
+
+ if (ret) {
+ debug("%s: Codec init failed\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+int sound_init(const void *blob)
+{
+ int ret;
+ struct i2stx_info *pi2s_tx = &g_i2stx_pri;
+
+ /* Get the I2S Values */
+ if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
+ debug(" FDT I2S values failed\n");
+ return -1;
+ }
+
+ if (codec_init(blob, pi2s_tx) < 0) {
+ debug(" Codec init failed\n");
+ return -1;
+ }
+
+ ret = i2s_tx_init(pi2s_tx);
+ if (ret) {
+ debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
+ ret);
+ return ret;
+ }
+
+
+ return ret;
+}
+
+int sound_play(uint32_t msec, uint32_t frequency)
+{
+ unsigned int *data;
+ unsigned long data_size;
+ unsigned int ret = 0;
+
+ /*Buffer length computation */
+ data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
+ data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
+ data = malloc(data_size);
+
+ if (data == NULL) {
+ debug("%s: malloc failed\n", __func__);
+ return -1;
+ }
+
+ sound_create_square_wave((unsigned short *)data,
+ data_size / sizeof(unsigned short),
+ frequency);
+
+ while (msec >= 1000) {
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
+ (data_size / sizeof(int)));
+ msec -= 1000;
+ }
+ if (msec) {
+ unsigned long size =
+ (data_size * msec) / (sizeof(int) * 1000);
+
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
+ }
+
+ free(data);
+
+ return ret;
+}
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
index 9b8ce5a..9dda2db 100644
--- a/drivers/sound/sound.c
+++ b/drivers/sound/sound.c
@@ -5,193 +5,10 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <malloc.h>
#include <common.h>
-#include <asm/io.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-#include <i2c.h>
-#include <i2s.h>
#include <sound.h>
-#include <asm/arch/sound.h>
-#include "wm8994.h"
-#include "max98095.h"
-/* defines */
-#define SOUND_400_HZ 400
-#define SOUND_BITS_IN_BYTE 8
-
-static struct i2stx_info g_i2stx_pri;
-
-/*
- * get_sound_i2s_values gets values for i2s parameters
- *
- * @param i2stx_info i2s transmitter transfer param structure
- * @param blob FDT blob if enabled else NULL
- */
-static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
-{
-#ifdef CONFIG_OF_CONTROL
- int node;
- int error = 0;
- int base;
-
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- return -1;
- }
-
- /*
- * Get the pre-defined sound specific values from FDT.
- * All of these are expected to be correct otherwise
- * wrong register values in i2s setup parameters
- * may result in no sound play.
- */
- base = fdtdec_get_addr(blob, node, "reg");
- if (base == FDT_ADDR_T_NONE) {
- debug("%s: Missing i2s base\n", __func__);
- return -1;
- }
- i2s->base_address = base;
-
- i2s->audio_pll_clk = fdtdec_get_int(blob,
- node, "samsung,i2s-epll-clock-frequency", -1);
- error |= i2s->audio_pll_clk;
- debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
- i2s->samplingrate = fdtdec_get_int(blob,
- node, "samsung,i2s-sampling-rate", -1);
- error |= i2s->samplingrate;
- debug("samplingrate = %d\n", i2s->samplingrate);
- i2s->bitspersample = fdtdec_get_int(blob,
- node, "samsung,i2s-bits-per-sample", -1);
- error |= i2s->bitspersample;
- debug("bitspersample = %d\n", i2s->bitspersample);
- i2s->channels = fdtdec_get_int(blob,
- node, "samsung,i2s-channels", -1);
- error |= i2s->channels;
- debug("channels = %d\n", i2s->channels);
- i2s->rfs = fdtdec_get_int(blob,
- node, "samsung,i2s-lr-clk-framesize", -1);
- error |= i2s->rfs;
- debug("rfs = %d\n", i2s->rfs);
- i2s->bfs = fdtdec_get_int(blob,
- node, "samsung,i2s-bit-clk-framesize", -1);
- error |= i2s->bfs;
- debug("bfs = %d\n", i2s->bfs);
-
- i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
- error |= i2s->id;
- debug("id = %d\n", i2s->id);
-
- if (error == -1) {
- debug("fail to get sound i2s node properties\n");
- return -1;
- }
-#else
- i2s->base_address = samsung_get_base_i2s();
- i2s->audio_pll_clk = I2S_PLL_CLK;
- i2s->samplingrate = I2S_SAMPLING_RATE;
- i2s->bitspersample = I2S_BITS_PER_SAMPLE;
- i2s->channels = I2S_CHANNELS;
- i2s->rfs = I2S_RFS;
- i2s->bfs = I2S_BFS;
- i2s->id = 0;
-#endif
- return 0;
-}
-
-/*
- * Init codec
- *
- * @param blob FDT blob
- * @param pi2s_tx i2s parameters required by codec
- * @return int value, 0 for success
- */
-static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
-{
- int ret;
- const char *codectype;
-#ifdef CONFIG_OF_CONTROL
- int node;
-
- /* Get the node from FDT for sound */
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- debug("node = %d\n", node);
- return -1;
- }
-
- /*
- * Get the pre-defined sound codec specific values from FDT.
- * All of these are expected to be correct otherwise sound
- * can not be played
- */
- codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
- debug("device = %s\n", codectype);
-#else
- codectype = AUDIO_CODEC;
-#endif
- if (!strcmp(codectype, "wm8994")) {
- /* Check the codec type and initialise the same */
- ret = wm8994_init(blob, pi2s_tx->id + 1,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample, pi2s_tx->channels);
- } else if (!strcmp(codectype, "max98095")) {
- ret = max98095_init(blob, pi2s_tx->id + 1,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample);
- } else {
- debug("%s: Unknown codec type %s\n", __func__, codectype);
- return -1;
- }
-
- if (ret) {
- debug("%s: Codec init failed\n", __func__);
- return -1;
- }
-
- return 0;
-}
-
-int sound_init(const void *blob)
-{
- int ret;
- struct i2stx_info *pi2s_tx = &g_i2stx_pri;
-
- /* Get the I2S Values */
- if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
- debug(" FDT I2S values failed\n");
- return -1;
- }
-
- if (codec_init(blob, pi2s_tx) < 0) {
- debug(" Codec init failed\n");
- return -1;
- }
-
- ret = i2s_tx_init(pi2s_tx);
- if (ret) {
- debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
- ret);
- return ret;
- }
-
-
- return ret;
-}
-
-/*
- * Generates square wave sound data for 1 second
- *
- * @param data data buffer pointer
- * @param size size of the buffer
- * @param freq frequency of the wave
- */
-static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
+void sound_create_square_wave(unsigned short *data, int size, uint32_t freq)
{
const int sample = 48000;
const unsigned short amplitude = 16000; /* between 1 and 32767 */
@@ -218,39 +35,3 @@ static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
}
}
}
-
-int sound_play(uint32_t msec, uint32_t frequency)
-{
- unsigned int *data;
- unsigned long data_size;
- unsigned int ret = 0;
-
- /*Buffer length computation */
- data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
- data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
- data = malloc(data_size);
-
- if (data == NULL) {
- debug("%s: malloc failed\n", __func__);
- return -1;
- }
-
- sound_prepare_buffer((unsigned short *)data,
- data_size / sizeof(unsigned short), frequency);
-
- while (msec >= 1000) {
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
- (data_size / sizeof(int)));
- msec -= 1000;
- }
- if (msec) {
- unsigned long size =
- (data_size * msec) / (sizeof(int) * 1000);
-
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
- }
-
- free(data);
-
- return ret;
-}
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 615df64..b7ff472 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -51,6 +51,7 @@
#define CONFIG_CMD_SOUND
#ifdef CONFIG_CMD_SOUND
#define CONFIG_SOUND
+#define CONFIG_I2S_SAMSUNG
#define CONFIG_I2S
#define CONFIG_SOUND_MAX98095
#define CONFIG_SOUND_WM8994
diff --git a/include/sound.h b/include/sound.h
index a06ab85..155e1b4 100644
--- a/include/sound.h
+++ b/include/sound.h
@@ -30,6 +30,15 @@ struct sound_codec_info {
};
/*
+ * Generates square wave sound data for 1 second
+ *
+ * @param data data buffer pointer
+ * @param size size of the buffer
+ * @param freq frequency of the wave
+ */
+void sound_create_square_wave(unsigned short *data, int size, uint32_t freq);
+
+/*
* Initialises audio sub system
* @param blob Pointer of device tree node or NULL if none.
* @return int value 0 for success, -1 for error
--
1.9.0.279.gdc9e3eb
More information about the U-Boot
mailing list