[U-Boot] [U-Boot PATCH v2 12/12] k2hk-evm: add configuration for spi1 and spi2 support

[Murali Karicheri]

currently only spi0 is enabled on k2hk evm. This
configuration update is needed to enable spi1 and spi2.

Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
---
 include/configs/k2hk_evm.h |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 33c7551..861010a 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -85,7 +85,16 @@
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI0
 #define CONFIG_SYS_SPI_BASE		K2HK_SPI_BASE
+#define CONFIG_SYS_SPI0_NUM_CS		4
+#define CONFIG_SYS_SPI1
+#define CONFIG_SYS_SPI1_BASE            K2HK_SPI1_BASE
+#define CONFIG_SYS_SPI1_NUM_CS		4
+#define CONFIG_SYS_SPI2
+#define CONFIG_SYS_SPI2_NUM_CS		4
+#define CONFIG_SYS_SPI2_BASE            K2HK_SPI2_BASE
+#define CONFIG_CMD_SPI
 #define CONFIG_SYS_SPI_CLK		clk_get_rate(K2HK_LPSC_EMIF25_SPI)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-- 
1.7.9.5