[U-Boot] [PATCH v3 0/7]zynq: Add nand support

[Siva Durga Prasad Paladugu]

This series of patches adds nand support for zynq by 
fixing the review comments provided in version v1.
These are well tested on xilinx zynq platform.

Jagannadha Sutradharudu Teki (7):
  nand: Add zynq nand controller driver support
  zynq-common: Define CONFIG_NAND_ZYNQ
  zynq: Add zynq_zc770 xm011 board support
  zynq: zc770: Add base dts for zc770_xm011
  zynq: Add support for auto nandboot
  doc: README.zynq: Updated with nand support addition
  zynq: Enable nand env. support

 README                                    |    3 +
 arch/arm/include/asm/arch-zynq/hardware.h |    2 +
 board/xilinx/dts/zynq-zc770-xm011.dts     |   14 +
 board/xilinx/zynq/board.c                 |    4 +
 boards.cfg                                |    1 +
 doc/README.zynq                           |    8 +-
 drivers/mtd/nand/Makefile                 |    1 +
 drivers/mtd/nand/zynq_nand.c              | 1188 +++++++++++++++++++++++++++++
 include/configs/zynq-common.h             |   15 +
 include/configs/zynq_zc770.h              |    5 +
 10 files changed, 1237 insertions(+), 4 deletions(-)
 create mode 100644 board/xilinx/dts/zynq-zc770-xm011.dts
 create mode 100755 drivers/mtd/nand/zynq_nand.c

-- 
1.7.4