[U-Boot] [PATCH 1/6] Add MS7206SE support.
Yoshinori Sato
ysato at users.sourceforge.jp
Tue Feb 11 13:20:32 CET 2014
Hi.
This patch series add to Renesas MS7206SE board support.
And SH2A targets various update.
Please comment.
Signed-off-by: Yoshinori Sato <ysato at users.sourceforge.jp>
---
board/renesas/ms7206se/Makefile | 10 +++
board/renesas/ms7206se/lowlevel_init.S | 124 +++++++++++++++++++++++++++++++++
board/renesas/ms7206se/ms7206se.c | 43 ++++++++++++
boards.cfg | 1 +
drivers/net/smc91111.h | 31 ++++++++-
include/configs/ms7206se.h | 95 +++++++++++++++++++++++++
6 files changed, 303 insertions(+), 1 deletion(-)
create mode 100644 board/renesas/ms7206se/Makefile
create mode 100644 board/renesas/ms7206se/lowlevel_init.S
create mode 100644 board/renesas/ms7206se/ms7206se.c
create mode 100644 include/configs/ms7206se.h
diff --git a/board/renesas/ms7206se/Makefile b/board/renesas/ms7206se/Makefile
new file mode 100644
index 0000000..eed3769
--- /dev/null
+++ b/board/renesas/ms7206se/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2013 Yoshinori Sato <ysato at users.sourceforge.jp>
+#
+# u-boot/board/renesas/ms7619se/Makefile
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := ms7206se.o
+obj-y += lowlevel_init.o
diff --git a/board/renesas/ms7206se/lowlevel_init.S b/board/renesas/ms7206se/lowlevel_init.S
new file mode 100644
index 0000000..4e1e70c
--- /dev/null
+++ b/board/renesas/ms7206se/lowlevel_init.S
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2013 Yoshinori Sato <ysato at users.sourceforge.jp>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+#include <asm/macro.h>
+#define INTMSK0 0x11800000
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+ mova CPG_settings_table,r0
+1: mov.l @r0+,r3 // Address (or zero)
+ tst r3,r3
+ bt 2f
+ mov.l @r0+,r1 // data
+ bra 1b
+ mov.w r1, at r3
+2:
+ mov.l $mclkcr,r0 // MCLKCR setting
+ mov #0x40,r1
+ mov.b r1, at r0
+
+ // Set up the Bus Controler
+ mova BSC_settings_table,r0
+5: mov.l @r0+,r3 // Address (or zero)
+ tst r3,r3
+ bt 6f
+ mov.l @r0+,r1 // data
+ bra 5b
+ mov.l r1, at r3
+
+6:
+ mov.l $delay_count,r0
+7:
+ dt r0
+ bf 7b
+
+ mov.l $SDMR,r1 // Turns on SDRAM controller
+ mov.l $SDMR_val,r2
+ mov.l r2, at r1
+
+ // Set up the Pin Function Controler
+ mova PFC_settings_table,r0
+3: mov.l @r0+,r3 // Address (or zero)
+ tst r3,r3
+ bt 4f
+ mov.l @r0+,r1 // data
+ bra 3b
+ mov.w r1, at r3
+4:
+ rts/n
+
+ .align 4
+$delay_count:
+ .long 2000
+$SDMR: .long 0xfffc5880
+$SDMR_val:
+ .long 0
+
+$mclkcr:
+ .long MCLKCR
+
+CPG_settings_table:
+ .long WTCSR,0xA500
+ .long WTCNT,0x5A00
+ .long WTCSR,0xA51E
+ .long FRQCR, 0x120c /* input:33.3333MHz I:B:P=6:2:1=200MHz:66MHz:33MHz */
+ .long 0
+
+BSC_settings_table:
+ # Settings from Hitachi docs for SE7206
+ .long CMNCR, 0x00001010
+ .long CS0BCR, 0x10000600
+ .long CS2BCR, 0x10000600
+ .long CS4BCR, 0x10000400
+ .long CS5BCR, 0x10000400
+ .long CS3BCR, 0x10004600
+ .long CS0WCR, 0x00000380; /* wait:4cycle */
+ .long CS2WCR, 0x00000380;
+ .long CS4WCR, 0x00000380;
+ .long CS5WCR, 0x00000380;
+ .long CS3WCR, 0x00004892; /* pre->actv:1cycle, actv->read/write:2cycle, write->pre:1cycle, ref->actv:4cycle */
+ .long SDCR, 0x00000811;
+ .long RTCNT, 0xa55a0083;
+ .long RTCOR, 0xa55a0083;
+ .long RTCSR, 0xa55a0008; /* reflesh count=B¦Õ/4 */
+ .long 0
+
+PFC_settings_table:
+ .long PACRH3, 0x0022
+ .long PACRH2, 0x1111
+ .long PACRH1, 0x1115
+ .long PACRL4, 0x1111
+ .long PACRL3, 0x1125
+ .long PACRL2, 0x2255
+ .long PACRL1, 0x5500
+ .long PBCR3, 0x0022
+ .long PBCR2, 0x2244
+ .long PBCR1, 0x1111
+ .long PCCRL1, 0x1111
+ .long PDCRH4, 0x1111
+ .long PDCRH3, 0x1111
+ .long PDCRH2, 0x1111
+ .long PDCRH1, 0x1111
+ .long PDCRL4, 0x1111
+ .long PDCRL3, 0x1111
+ .long PECRH1, 0x0005
+ .long PECRL4, 0x3223
+ .long PECRL3, 0x3030
+ .long PECRL2, 0x3550
+ .long IFCR, 0x0003
+ .long 0
+
+$INTMSK0:
+ .long INTMSK0
diff --git a/board/renesas/ms7206se/ms7206se.c b/board/renesas/ms7206se/ms7206se.c
new file mode 100644
index 0000000..45906fb
--- /dev/null
+++ b/board/renesas/ms7206se/ms7206se.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2013 Yoshinori Sato <ysato at users.sourceforge.jp>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("BOARD: Renesas Technology MS7206SE\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC91111
+ rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+ return rc;
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index c97c4bd..a56f196 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1203,6 +1203,7 @@ Active powerpc ppc4xx - xilinx ppc440-generic
Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic_flash xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <ricardo.ribalda at uam.es>
Active sandbox sandbox - sandbox sandbox sandbox - Simon Glass <sjg at chromium.org>
Active sh sh2 - renesas rsk7203 rsk7203 - Nobuhiro Iwamatsu <iwamatsu.nobuhiro at renesas.com>:Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+Active sh sh2 - renesas ms7206se ms7206se - Yoshinori Sato <ysato at users.sourceforge.jp>
Active sh sh2 - renesas rsk7264 rsk7264 - Phil Edworthy <phil.edworthy at renesas.com>
Active sh sh2 - renesas rsk7269 rsk7269 - -
Active sh sh3 - - mpr2 mpr2 - Mark Jonas <mark.jonas at de.bosch.com>
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index 9deee9b..513a67d 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -236,7 +236,36 @@ struct smc91111_priv{
*(__b2 + __i) = SMC_inb((a),(r)); \
}; \
}while(0)
-
+#elif defined(CONFIG_MS7206SE)
+#define SWAB(x) ({ word __x = x; ((__x << 8)|(__x >> 8));})
+#define SMC_inw(a,r) *((volatile word *)((a)->iobase + (r)))
+#define SMC_inb(a,r) (*((volatile byte *)((a)->iobase + ((r) ^ 0x01))))
+#define SMC_insw(a,r,b,l) \
+ do { \
+ int __i; \
+ word *__b2 = (word *)(b); \
+ for (__i = 0; __i < (l); __i++) { \
+ *__b2++ = SWAB(SMC_inw(a, r)); \
+ } \
+ } while(0);
+#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
+#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((a),((r)&(~1))); \
+ if(((r) & 1)) \
+ __w = (__w & 0x00ff) | (__d << 8); \
+ else \
+ __w = (__w & 0xff00) | (__d); \
+ SMC_outw((a),__w,((r)&(~1))); \
+ })
+#define SMC_outsw(a,r,b,l) \
+ do { \
+ int __i; \
+ word *__b2 = (word *)(b); \
+ for (__i = 0; __i < (l); __i++) { \
+ SMC_outw(a, SWAB(*__b2), r); \
+ __b2++; \
+ } \
+ } while(0);
#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
diff --git a/include/configs/ms7206se.h b/include/configs/ms7206se.h
new file mode 100644
index 0000000..805044c
--- /dev/null
+++ b/include/configs/ms7206se.h
@@ -0,0 +1,95 @@
+/*
+ * Configuation settings for the Renesas Technology MS7206SE
+ *
+ * Copyright (C) 2013 Yoshinori Sato <ysato at users.sourceforge.jp>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MS7206SE_H
+#define __MS7206SE
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH2 1
+#define CONFIG_SH2A 1
+#define CONFIG_CPU_SH7206 1
+#define CONFIG_MS7206SE 1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS "console=ttySC3,115200"
+#define CONFIG_LOADADDR 0x0C100000 /* MS7206SE01_SDRAM_BASE + 1MB */
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define MS7206SE_SDRAM_BASE 0x0C000000
+#define MS7206SE_FLASH_BASE_1 0x20000000 /* Non cache */
+#define MS7206SE_FLASH_BANK_SIZE (16 * 1024 * 1024)
+
+#define CONFIG_SYS_TEXT_BASE 0x0C7C0000
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
+/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 3840, 57600, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF3 1
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_LOADADDR
+#define CONFIG_SYS_MEMTEST_END (CONFIG_LOADADDR + (63 * 1024 * 1024))
+
+#define CONFIG_SYS_SDRAM_BASE MS7206SE_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
+
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE MS7206SE_FLASH_BASE_1
+#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#undef CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_BASE MS7206SE_FLASH_BASE_1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT 142
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+
+/* Network interface */
+#define CONFIG_SMC91111
+#define CONFIG_SMC91111_BASE (0x30000000)
+
+#endif /* __MS7206SE_H */
--
1.8.5.3
More information about the U-Boot
mailing list