[U-Boot] [uBoot] [PATCH v2 1/2] common: spl: Add spl sata boot support

Roger Quadros rogerq at ti.com
Mon Feb 10 11:40:53 CET 2014


Dan,

On 02/07/2014 04:11 PM, Dan Murphy wrote:
> Roger
> 
> On 02/07/2014 03:48 AM, Roger Quadros wrote:
>> Hi Dan,
>>
>> On 02/03/2014 02:59 PM, Dan Murphy wrote:
>>> Add spl_sata to read a fat partition from a bootable SATA
>>> drive.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>>> ---
>> I got some check-patch errors with this one.
>> Once that is fixed you can please add
> 
> Thanks for the review
> 
> Checkpatch errors or warnings?

Right, warnings not errors.

cheers,
-roger

> 
> When I ran checkpatch before submitting I did have 2 warnings but these should be
> acceptable.
> 
> I will let the maintainer decide on the acceptability of the two warnings since these warnings are consistent
> with the spl_mmc and spl_usb files
> 
> WARNING: suspect code indent for conditional statements (8, 8)
> #122: FILE: common/spl/spl_sata.c:39:
> +    if (spl_start_uboot() || spl_load_image_fat_os(stor_dev,
> [...]
> +    err = spl_load_image_fat(stor_dev,
> 
> WARNING: line over 80 characters
> #123: FILE: common/spl/spl_sata.c:40:
> +                                    CONFIG_SYS_SATA_FAT_BOOT_PARTITION))
> 
> total: 0 errors, 2 warnings, 99 lines checked
> 
> 
>>
>> Reviewed-by: Roger Quadros <rogerq at ti.com>
>>
>> cheers,
>> -roger
>>> v2 - Removed debug print - http://patchwork.ozlabs.org/patch/314811/
>>>
>>>  common/Makefile       |    3 +++
>>>  common/cmd_scsi.c     |    2 ++
>>>  common/spl/Makefile   |    1 +
>>>  common/spl/spl.c      |    5 +++++
>>>  common/spl/spl_sata.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
>>>  include/spl.h         |    3 +++
>>>  spl/Makefile          |    1 +
>>>  7 files changed, 64 insertions(+)
>>>  create mode 100644 common/spl/spl_sata.c
>>>
>>> diff --git a/common/Makefile b/common/Makefile
>>> index 4d99ecd..b0f5b62 100644
>>> --- a/common/Makefile
>>> +++ b/common/Makefile
>>> @@ -201,6 +201,9 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT
>>>  obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
>>>  obj-$(CONFIG_USB_STORAGE) += usb_storage.o
>>>  endif
>>> +ifdef CONFIG_SPL_SATA_SUPPORT
>>> +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
>>> +endif
>>>  ifneq ($(CONFIG_SPL_NET_SUPPORT),y)
>>>  obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
>>>  obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
>>> diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
>>> index 7b97dc9..b3f7687 100644
>>> --- a/common/cmd_scsi.c
>>> +++ b/common/cmd_scsi.c
>>> @@ -168,7 +168,9 @@ removable:
>>>  		scsi_curr_dev = -1;
>>>  
>>>  	printf("Found %d device(s).\n", scsi_max_devs);
>>> +#ifndef CONFIG_SPL_BUILD
>>>  	setenv_ulong("scsidevs", scsi_max_devs);
>>> +#endif
>>>  }
>>>  
>>>  int scsi_get_disk_count(void)
>>> diff --git a/common/spl/Makefile b/common/spl/Makefile
>>> index 65a1484f..64569c2 100644
>>> --- a/common/spl/Makefile
>>> +++ b/common/spl/Makefile
>>> @@ -18,4 +18,5 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
>>>  obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
>>>  obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
>>>  obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
>>> +obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
>>>  endif
>>> diff --git a/common/spl/spl.c b/common/spl/spl.c
>>> index 0645cee..774fdad 100644
>>> --- a/common/spl/spl.c
>>> +++ b/common/spl/spl.c
>>> @@ -210,6 +210,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>>>  		spl_usb_load_image();
>>>  		break;
>>>  #endif
>>> +#ifdef CONFIG_SPL_SATA_SUPPORT
>>> +	case BOOT_DEVICE_SATA:
>>> +		spl_sata_load_image();
>>> +		break;
>>> +#endif
>>>  	default:
>>>  		debug("SPL: Un-supported Boot Device\n");
>>>  		hang();
>>> diff --git a/common/spl/spl_sata.c b/common/spl/spl_sata.c
>>> new file mode 100644
>>> index 0000000..2e7adca
>>> --- /dev/null
>>> +++ b/common/spl/spl_sata.c
>>> @@ -0,0 +1,49 @@
>>> +/*
>>> + * (C) Copyright 2013
>>> + * Texas Instruments, <www.ti.com>
>>> + *
>>> + * Dan Murphy <dmurphy at ti.com>
>>> + *
>>> + * SPDX-License-Identifier:	GPL-2.0+
>>> + *
>>> + * Derived work from spl_usb.c
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <spl.h>
>>> +#include <asm/u-boot.h>
>>> +#include <sata.h>
>>> +#include <fat.h>
>>> +#include <version.h>
>>> +#include <image.h>
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +void spl_sata_load_image(void)
>>> +{
>>> +	int err;
>>> +	block_dev_desc_t *stor_dev;
>>> +
>>> +	err = init_sata(CONFIG_SPL_SATA_BOOT_DEVICE);
>>> +	if (err) {
>>> +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
>>> +		printf("spl: sata init failed: err - %d\n", err);
>>> +#endif
>>> +		hang();
>>> +	} else {
>>> +		/* try to recognize storage devices immediately */
>>> +		stor_dev = scsi_get_dev(0);
>>> +	}
>>> +
>>> +#ifdef CONFIG_SPL_OS_BOOT
>>> +	if (spl_start_uboot() || spl_load_image_fat_os(stor_dev,
>>> +									CONFIG_SYS_SATA_FAT_BOOT_PARTITION))
>>> +#endif
>>> +	err = spl_load_image_fat(stor_dev,
>>> +				CONFIG_SYS_SATA_FAT_BOOT_PARTITION,
>>> +				CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
>>> +	if (err) {
>>> +		puts("Error loading sata device\n");
>>> +		hang();
>>> +	}
>>> +}
>>> diff --git a/include/spl.h b/include/spl.h
>>> index 5e24856..ee09fb6 100644
>>> --- a/include/spl.h
>>> +++ b/include/spl.h
>>> @@ -64,6 +64,9 @@ void spl_net_load_image(const char *device);
>>>  /* USB SPL functions */
>>>  void spl_usb_load_image(void);
>>>  
>>> +/* SATA SPL functions */
>>> +void spl_sata_load_image(void);
>>> +
>>>  /* SPL FAT image functions */
>>>  int spl_load_image_fat(block_dev_desc_t *block_dev, int partition, const char *filename);
>>>  int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition);
>>> diff --git a/spl/Makefile b/spl/Makefile
>>> index 4143e38..28fcfdd 100644
>>> --- a/spl/Makefile
>>> +++ b/spl/Makefile
>>> @@ -85,6 +85,7 @@ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
>>>  LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
>>>  LIBS-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
>>>  LIBS-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
>>> +LIBS-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
>>>  
>>>  ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
>>>  LIBS-y += arch/$(ARCH)/imx-common/
>>>
> 
> 



More information about the U-Boot mailing list