[U-Boot] [PATCH 8/8 v2] arm/km: introduce kmsugp1 target

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Feb 13 17:52:51 CET 2014


Hi Holger,

On Thu, 13 Feb 2014 16:43:00 +0100, Holger Brunck
<holger.brunck at keymile.com> wrote:

> From: Gerlando Falauto <gerlando.falauto at keymile.com>
> 
> KMSUGP1 is from a u-boot perspective (almost) identical to KMNUSA.
> The only difference is that the PCIe reset is connected to Kirkwood pin
> MPP7_PEX_RST_OUTn, we use a dedicated config flag KM_PCIE_RESET_MPP7.
> Such pin should theoretically be handled by the PCIe subsystem
> automatically, but this turned out not to be the case.
> So simply configure this PIN as a GPIO and issue a pulse manually.
> 
> Signed-off-by: Gerlando Falauto <gerlando.falauto at keymile.com>
> Cc: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> Cc: Valentin Longchamp <valenting.longchamp at keymile.com>
> Cc: Holger Brunck <holger.brunck at keymile.com>
> ---
> Changes for v2:
>   - solve merge conflict for latest arm/master branch

The whole series applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list