[U-Boot] [PATCH 05/15] kbuild: Add $(Q) when descending into subdirectories

[Masahiro Yamada]

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---

 Makefile     | 21 ++++++++-------------
 spl/Makefile |  4 ++--
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/Makefile b/Makefile
index beca991..edb6868 100644
--- a/Makefile
+++ b/Makefile
@@ -791,7 +791,7 @@ u-boot.img:	u-boot.bin
 		-d $< $@
 
 u-boot.imx: u-boot.bin
-		$(MAKE) $(build)=arch/arm/imx-common $(objtree)/u-boot.imx
+	$(Q)$(MAKE) $(build)=arch/arm/imx-common $(objtree)/$@
 
 u-boot.kwb:       u-boot.bin
 		tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -828,13 +828,8 @@ u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD)
 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin
 		$(call SPL_PAD_APPEND,$<,u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO))
 
-u-boot-with-spl.imx: spl/u-boot-spl.bin u-boot.bin
-		$(MAKE) $(build)=arch/arm/imx-common \
-			$(OBJTREE)/u-boot-with-spl.imx
-
-u-boot-with-nand-spl.imx: spl/u-boot-spl.bin u-boot.bin
-		$(MAKE) $(build)=arch/arm/imx-common \
-			$(OBJTREE)/u-boot-with-nand-spl.imx
+u-boot-with-spl.imx u-boot-with-nand-spl.imx: spl/u-boot-spl.bin u-boot.bin
+	$(Q)$(MAKE) $(build)=arch/arm/imx-common $(objtree)/$@
 
 u-boot.ubl:       u-boot-with-spl.bin
 		tools/mkimage -n $(UBL_CONFIG) -T ublimage \
@@ -852,8 +847,8 @@ u-boot.ais:       spl/u-boot-spl.bin u-boot.img
 		cat spl/u-boot-spl-pad.ais u-boot.img > u-boot.ais
 
 
-u-boot.sb:       u-boot.bin spl/u-boot-spl.bin
-		$(MAKE) $(build)=$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
 # Both images are created using mkimage (crc etc), so that the ROM
@@ -1051,16 +1046,16 @@ u-boot.lds: $(LDSCRIPT) prepare
 		$(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl: prepare
-		$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
+	$(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
 
 u-boot-nand.bin:	nand_spl u-boot.bin
 		cat nand_spl/u-boot-spl-16k.bin u-boot.bin > u-boot-nand.bin
 
 spl/u-boot-spl.bin: tools prepare
-		$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
+	$(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
 
 tpl/u-boot-tpl.bin: tools prepare
-		$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
+	$(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
 
 TAG_SUBDIRS := $(u-boot-dirs) include
 
diff --git a/spl/Makefile b/spl/Makefile
index 3e63881..10b77a5 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -175,8 +175,8 @@ $(OBJTREE)/MLO.byteswap: $(obj)/u-boot-spl.bin
 	$(OBJTREE)/tools/mkimage -T omapimage -n byteswap \
 		-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
 
-$(objtree)/SPL : $(obj)/u-boot-spl.bin
-		$(MAKE) $(build)=spl/arch/arm/imx-common $@
+$(objtree)/SPL: $(obj)/u-boot-spl.bin
+	$(Q)$(MAKE) $(build)=spl/arch/arm/imx-common $@
 
 ALL-y	+= $(obj)/$(SPL_BIN).bin
 
-- 
1.8.3.2