[U-Boot] [U-Boot, v4, 1/1] Initial support for Silica Pengwyn board

[Tom Rini]

On Fri, Jan 31, 2014 at 05:34:14PM +0100, Lothar Felten wrote:

> This patch add support for the Silica Pengwyn board [1]
> The board is based on a TI AM3354 CPU [2]
> All jumpers removed it will boot from the SDcard, the console is on
> UART1 accessible via the FDTI -> USB. The on board NAND flash is
> supported and can act as boot medium, depending on jumper settings.
> USB Host, USB Device and Ethernet are also provided but untested.
> 
> [1]
> http://www.silica.com/product/silica-pengwyn-board.html
> [2]
> http://www.ti.com/product/am3354
> 
> Signed-off-by: Lothar Felten <lothar.felten at gmail.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/44ab6506/attachment.pgp>