[U-Boot] [PATCH v3 6/8] cmd_mmc.c: Drop open/close mmc sub-commands
Tom Rini
trini at ti.com
Wed Feb 5 16:24:23 CET 2014
The open and close mmc sub-commands implement a hard-coded set of values
specific to the SMDK5250 platform. Remove these commands as what they
did can be done instead with a series of mmc dev / bootpart / bootbus
commands instead now.
Cc: Amar <amarendra.xt at samsung.com>
Cc: Minkyu Kang <mk7.kang at samsung.com>
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Signed-off-by: Tom Rini <trini at ti.com>
---
common/cmd_mmc.c | 72 -----------------------------------------------------
drivers/mmc/mmc.c | 65 -----------------------------------------------
include/mmc.h | 2 --
3 files changed, 139 deletions(-)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index a028149..2d51927 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -131,36 +131,6 @@ U_BOOT_CMD(
"- display info of the current MMC device"
);
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
-{
- int err;
- err = mmc_boot_part_access(mmc, ack, part_num, access);
-
- if ((err == 0) && (access != 0)) {
- printf("\t\t\t!!!Notice!!!\n");
-
- printf("!You must close EMMC boot Partition");
- printf("after all images are written\n");
-
- printf("!EMMC boot partition has continuity");
- printf("at image writing time.\n");
-
- printf("!So, do not close the boot partition");
- printf("before all images are written.\n");
- return 0;
- } else if ((err == 0) && (access == 0))
- return 0;
- else if ((err != 0) && (access != 0)) {
- printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
- return 1;
- } else {
- printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
- return 1;
- }
-}
-#endif
-
static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
@@ -273,44 +243,6 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
- } else if ((strcmp(argv[1], "open") == 0) ||
- (strcmp(argv[1], "close") == 0)) {
- int dev;
- struct mmc *mmc;
- u8 part_num, access = 0;
-
- if (argc == 4) {
- dev = simple_strtoul(argv[2], NULL, 10);
- part_num = simple_strtoul(argv[3], NULL, 10);
- } else {
- return CMD_RET_USAGE;
- }
-
- mmc = find_mmc_device(dev);
- if (!mmc) {
- printf("no mmc device at slot %x\n", dev);
- return 1;
- }
-
- if (IS_SD(mmc)) {
- printf("SD device cannot be opened/closed\n");
- return 1;
- }
-
- if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
- printf("Invalid boot partition number:\n");
- printf("Boot partition number cannot be <= 0\n");
- printf("EMMC44 supports only 2 boot partitions\n");
- return 1;
- }
-
- if (strcmp(argv[1], "open") == 0)
- access = part_num; /* enable R/W access to boot part*/
- else
- access = 0; /* No access to boot partition */
-
- /* acknowledge to be sent during boot operation */
- return boot_part_access(mmc, 1, part_num, access);
} else if (strcmp(argv[1], "partconf") == 0) {
int dev;
struct mmc *mmc;
@@ -498,10 +430,6 @@ U_BOOT_CMD(
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices\n"
#ifdef CONFIG_SUPPORT_EMMC_BOOT
- "mmc open <dev> <boot_partition>\n"
- " - Enable boot_part for booting and enable R/W access of boot_part\n"
- "mmc close <dev> <boot_partition>\n"
- " - Enable boot_part for booting and disable access to boot_part\n"
"mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
" - Set the BOOT_BUS_WIDTH field of the specified device\n"
"mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index fc1c1dc..3a57ab8 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1442,71 +1442,6 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
}
/*
- * This function shall form and send the commands to open / close the
- * boot partition specified by user.
- *
- * Input Parameters:
- * ack: 0x0 - No boot acknowledge sent (default)
- * 0x1 - Boot acknowledge sent during boot operation
- * part_num: User selects boot data that will be sent to master
- * 0x0 - Device not boot enabled (default)
- * 0x1 - Boot partition 1 enabled for boot
- * 0x2 - Boot partition 2 enabled for boot
- * access: User selects partitions to access
- * 0x0 : No access to boot partition (default)
- * 0x1 : R/W boot partition 1
- * 0x2 : R/W boot partition 2
- * 0x3 : R/W Replay Protected Memory Block (RPMB)
- *
- * Returns 0 on success.
- */
-int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
-{
- int err;
- struct mmc_cmd cmd;
-
- /* Boot ack enable, boot partition enable , boot partition access */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
-
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_PART_CONF << 16) |
- ((EXT_CSD_BOOT_ACK(ack) |
- EXT_CSD_BOOT_PART_NUM(part_num) |
- EXT_CSD_PARTITION_ACCESS(access)) << 8);
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- if (access) {
- debug("mmc boot partition#%d open fail:Error1 = %d\n",
- part_num, err);
- } else {
- debug("mmc boot partition#%d close fail:Error = %d\n",
- part_num, err);
- }
- return err;
- }
-
- if (access) {
- /* 4bit transfer mode at booting time. */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
-
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BOOT_BUS_WIDTH << 16) |
- ((1 << 0) << 8);
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- debug("mmc boot partition#%d open fail:Error2 = %d\n",
- part_num, err);
- return err;
- }
- }
- return 0;
-}
-
-/*
* Modify EXT_CSD[177] which is BOOT_BUS_WIDTH
* based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH
* and BOOT_MODE.
diff --git a/include/mmc.h b/include/mmc.h
index 3594286..e95a237 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -313,8 +313,6 @@ int mmc_set_dsr(struct mmc *mmc, u16 val);
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
unsigned long rpmbsize);
-/* Function to send commands to open/close the specified boot partition */
-int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
/* Function to modify the PARTITION_CONFIG field of EXT_CSD */
int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
--
1.7.9.5
More information about the U-Boot
mailing list