[U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM

Tom Rini trini at ti.com
Mon Feb 10 22:23:23 CET 2014


On Fri, Feb 07, 2014 at 06:23:07PM -0500, Murali Karicheri wrote:

>  - Resending since I missed some in the CC
> 
> This patch series add support for keystone2 SoC and K2HK EVM.
> 
> Following patches were reviewed before in this list and v1 of the
> same is send with review comments incorporated:-
>   - tools: mkimage: add support for gpimage format
>   - arm: add support for arch timer
>   - NAND: DaVinci: allow forced disable of subpage writes
> 
> The patch below is added as a seperate patch based on comments:-
>    - tools: sort the entries in Makefile
> 
> Murali Karicheri (5):
>   tools: sort the entries in Makefile
>   tools: mkimage: add support for gpimage format
>   NAND: DaVinci: allow forced disable of subpage writes
>   k2hk: add support for k2hk SOC and EVM
>   keystone2: net: add keystone ethernet driver
> 
> Vitaly Andrianov (2):
>   fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()
>   arm: add support for arch timer

For the next go-round, you shouldn't need to give git send-email
anything more than --subject-prefix='PATCH v3' to get the subject
correct and shorter.

In general:
- 7/7 got lost?  Or did I just miss it?
- There's a lot of what looks like copy/paste from davinci drivers, we
  need to better re-use the code in place (and move to common locations
  as needed).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140210/e605d9fb/attachment.pgp>


More information about the U-Boot mailing list