[U-Boot] [PATCH] arm64 patch: gicv3 support
FengHua
fenghua at phytium.com.cn
Mon Feb 24 14:22:14 CET 2014
> -----Original Messages-----
> From: "Albert ARIBAUD" <albert.u.boot at aribaud.net>
> Sent Time: 2014-02-22 00:38:05 (Saturday)
> To: fenghua at phytium.com.cn
> Cc: u-boot at lists.denx.de, trini at ti.com
> Subject: Re: [PATCH] arm64 patch: gicv3 support
>
> Hi fenghua at phytium.com.cn,
>
> On Wed, 15 Jan 2014 16:10:56 +0800, fenghua at phytium.com.cn wrote:
>
> > From: David Feng <fenghua at phytium.com.cn>
> >
> > This patch add gicv3 support to uboot armv8 platform.
> > Modifications cover 4 source files, as follows:
> > gic.S: gicv3 initialization and sgi interrupt raising.
> > goc.h: gicv3 register definitions.
> > vexpress_aemv8a.h: add CONFIG_GICV2/CONFIG_GICV3 switch.
> > start.S: set SCR_EL3.NS bit to 1, gicv3 register of ICC_SRE_EL2
> > could be accessed only when SCR_EL3.NS=1.
> > set SCR_EL3.IRQ|FIQ|EA bits, reroute all interrupts to
> > el3 at all cores, slaves could be waken up by interrupt
> > only when the interrupt is routed to it when running
> > at el3.
> > Note: please use the latest gcc 4.8 compiler from linaro
> > which support gicv3 system register assembling.
> >
> > Signed-off-by: David Feng <fenghua at phytium.com.cn>
> > ---
>
> I am not well-versed enough in aarch64 and GIC, be it v2 or v3, so...
> Is this patch OK as it is, or should a V2 follow with common GIVv2/GICv3
> code merged?
>
> Amicalement,
hi Albert,
I am preparing the V2, there are some optimizations. But it's still Armv8 specific.
I would like to consider common Gicv2/Gicv3 code working across armv7 and armv8.
It's not easy and I have no armv7 test environment.
Thank you!
Best Regards,
David
More information about the U-Boot
mailing list