[U-Boot] Ethernet persistence
Michal Simek
monstr at monstr.eu
Fri Feb 28 11:22:35 CET 2014
On 02/27/2014 05:09 PM, Anthony Mahar wrote:
> How can I make the ethernet connection persistent (after first use), rather
> than reconnecting/re initializing on each reuse?
>
> I'm working with a Xilinx Zynq zc706 board and am up and running u-boot
> quite successfully. My main use case is to store u-boot in on-board flash,
> and have u-boot tftp get / boot the bitstream, kernel image, devicetree, and
> ramdisk image. The following script functions well:
> "qspiboot=echo Configure PL and booting Linux from TFTP... && " \
> "fpga info 0;" \
> "tftp 0x1000000 system.bin;" \
> "fpga load 0 0x1000000 cb44bc;" \
> "tftp 0x3000000 ${kernel_image};" \
> "tftp 0x2A00000 ${devicetree_image};" \
> "tftp 0x2000000 ${ramdisk_image};" \
> "bootm 0x3000000 0x2000000 0x2A00000\0" \
>
>
> The ethernet (Zynq's gem.e000b000) will get initialized on first use, as
> appropriate, however the Ethernet is reinitialized and auto negotiated again
> for each subsequent tftp request which shouldn't be necessary. A snippet is
> listed below. Each 'reconnection' takes several seconds... a few to auto
> negotiate, then a few more for the Windows based TFTP server to recognize
> the connection and allow connections to the server. Multiply this by the
> number of transfers and it takes a very long time to transfer a very little
> amount of data.
>
> Snippet:
>
> Xilinx Device
> Descriptor @ 0x3ffbaf78
> Family: Zynq PL
> Interface type: Device configuration interface (Zynq)
> Device Size: 13321404 bytes
> Cookie: 0x45 (69)
> Device name: 7z045
> No Device Function Table.
> Gem.e000b000 Waiting for PHY auto negotiation to complete....... done
> Using Gem.e000b000 device
> TFTP from server 192.168.2.1; our IP address is 192.168.2.10
> Filename 'system.bin'.
> Load address: 0x1000000
> Loading: T #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ###############################################################
> 953.1 KiB/s
> done
> Bytes transferred = 13321404 (cb44bc hex)
> Gem.e000b000:7 is connected to Gem.e000b000. Reconnecting to Gem.e000b000
> Gem.e000b000 Waiting for PHY auto negotiation to complete....... done
> Using Gem.e000b000 device
> TFTP from server 192.168.2.1; our IP address is 192.168.2.10
> Filename 'uImage'.
> Load address: 0x3000000
> Loading: T #################################################################
> #################################################################
> #################################################################
> ################
> 429.7 KiB/s
> done
>
I am not sure if this is intention with phylib but this was bring up
with phylib. I still support non-phylib version in xilinx u-boot git version
(but it is not regularly tested).
Not sure what your system.bin is but if you use FIT then you can just download
one image.
Thanks
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140228/8eb09d47/attachment.pgp>
More information about the U-Boot
mailing list