[U-Boot] [PATCH 1/2] power: add PFUZE100 PMIC driver

Michael Trimarchi michael at amarulasolutions.com
Mon Feb 3 20:34:07 CET 2014


Hi

Il 01/feb/2014 20:51 "Tim Harvey" <tharvey at gateworks.com> ha scritto:
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  drivers/power/pmic/Makefile        |  1 +
>  drivers/power/pmic/pmic_pfuze100.c | 42 +++++++++++++++++
>  include/power/pfuze100_pmic.h      | 96
++++++++++++++++++++++++++++++++++++++
>  3 files changed, 139 insertions(+)
>  create mode 100644 drivers/power/pmic/pmic_pfuze100.c
>  create mode 100644 include/power/pfuze100_pmic.h
>
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index 0b45ffa..4129bda 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -9,5 +9,6 @@ obj-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
>  obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
>  obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
>  obj-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
> +obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
>  obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
>  obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
> diff --git a/drivers/power/pmic/pmic_pfuze100.c
b/drivers/power/pmic/pmic_pfuze100.c
> new file mode 100644
> index 0000000..c382921
> --- /dev/null
> +++ b/drivers/power/pmic/pmic_pfuze100.c
> @@ -0,0 +1,42 @@
> +/*
> + * Copyright (C) 2014 Gateworks Corporation
> + * Tim Harvey <tharvey at gateworks.com>
> + *
> + * SPDX-License-Identifier:      GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <i2c.h>
> +#include <power/pmic.h>
> +#include <power/pfuze100_pmic.h>
> +
> +int pmic_init(unsigned char bus)
> +{
> +       static const char name[] = "PFUZE100_PMIC";
> +       int ret;
> +       struct pmic *p = pmic_alloc();
> +
> +       if (!p) {
> +               printf("%s: POWER allocation error!\n", __func__);
> +               return -ENOMEM;
> +       }
> +
> +       p->name = name;
> +       p->interface = PMIC_I2C;
> +       p->number_of_regs = PMIC_NUM_OF_REGS;
> +       p->hw.i2c.addr = CONFIG_POWER_PFUZE100_I2C_ADDR;
> +       p->hw.i2c.tx_num = 1;
> +       p->bus = bus;
> +
> +       ret = i2c_set_bus_num(p->bus);
> +       if (ret)
> +               return ret;
> +       if (!i2c_probe(p->hw.i2c.addr)) {

Can you use ret = i2c_probe and invert condition?

Michael

> +               unsigned char dev_id, rev_id;
> +               i2c_read(p->hw.i2c.addr, PFUZE100_DEVICEID, 1, &dev_id,
1);
> +               i2c_read(p->hw.i2c.addr, PFUZE100_REVID, 1, &rev_id, 1);
> +               printf("PMIC:  PFUZE100 0x%02x/0x%02x\n", dev_id, rev_id);
> +       }
> +       return 0;
> +}
> diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
> new file mode 100644
> index 0000000..2a9032a
> --- /dev/null
> +++ b/include/power/pfuze100_pmic.h
> @@ -0,0 +1,96 @@
> +/*
> + *  Copyright (C) 2014 Gateworks Corporation
> + *  Tim Harvey <tharvey at gateworks.com>
> + *
> + * SPDX-License-Identifier:     GPL-2.0+
> + */
> +
> +#ifndef __PFUZE100_PMIC_H_
> +#define __PFUZE100_PMIC_H_
> +
> +/* PFUZE100 registers */
> +enum {
> +       PFUZE100_DEVICEID       = 0x00,
> +       PFUZE100_REVID          = 0x03,
> +       PFUZE100_FABID          = 0x04,
> +
> +       PFUZE100_SW1ABVOL       = 0x20,
> +       PFUZE100_SW1CVOL        = 0x2e,
> +       PFUZE100_SW2VOL         = 0x35,
> +       PFUZE100_SW3AVOL        = 0x3c,
> +       PFUZE100_SW3BVOL        = 0x43,
> +       PFUZE100_SW4VOL         = 0x4a,
> +       PFUZE100_SWBSTCON1      = 0x66,
> +       PFUZE100_VREFDDRCON     = 0x6a,
> +       PFUZE100_VSNVSVOL       = 0x6b,
> +       PFUZE100_VGEN1VOL       = 0x6c,
> +       PFUZE100_VGEN2VOL       = 0x6d,
> +       PFUZE100_VGEN3VOL       = 0x6e,
> +       PFUZE100_VGEN4VOL       = 0x6f,
> +       PFUZE100_VGEN5VOL       = 0x70,
> +       PFUZE100_VGEN6VOL       = 0x71,
> +
> +       PMIC_NUM_OF_REGS        = 0x7f,
> +};
> +
> +/*
> + * LDO Configuration
> + */
> +
> +/* VGEN1/2 Voltage Configuration */
> +#define LDOA_0_80V     0
> +#define LDOA_0_85V     1
> +#define LDOA_0_90V     2
> +#define LDOA_0_95V     3
> +#define LDOA_1_00V     4
> +#define LDOA_1_05V     5
> +#define LDOA_1_10V     6
> +#define LDOA_1_15V     7
> +#define LDOA_1_20V     8
> +#define LDOA_1_25V     9
> +#define LDOA_1_30V     10
> +#define LDOA_1_35V     11
> +#define LDOA_1_40V     12
> +#define LDOA_1_45V     13
> +#define LDOA_1_50V     14
> +#define LDOA_1_55V     15
> +
> +/* VGEN3/4/5/6 Voltage Configuration */
> +#define LDOB_1_80V     0
> +#define LDOB_1_90V     1
> +#define LDOB_2_00V     2
> +#define LDOB_2_10V     3
> +#define LDOB_2_20V     4
> +#define LDOB_2_30V     5
> +#define LDOB_2_40V     6
> +#define LDOB_2_50V     7
> +#define LDOB_2_60V     8
> +#define LDOB_2_70V     9
> +#define LDOB_2_80V     10
> +#define LDOB_2_90V     11
> +#define LDOB_3_00V     12
> +#define LDOB_3_10V     13
> +#define LDOB_3_20V     14
> +#define LDOB_3_30V     15
> +
> +#define LDO_VOL_MASK   0xf
> +#define LDO_EN         4
> +
> +/*
> + * Boost Regulator
> + */
> +
> +/* SWBST Output Voltage */
> +#define SWBST_5_00V    0
> +#define SWBST_5_05V    1
> +#define SWBST_5_10V    2
> +#define SWBST_5_15V    3
> +
> +#define SWBST_VOL_MASK 0x3
> +#define SWBST_MODE_MASK        0x6
> +#define SWBST_MODE_OFF (2 << 0)
> +#define SWBST_MODE_PFM (2 << 1)
> +#define SWBST_MODE_AUTO        (2 << 2)
> +#define SWBST_MODE_APS (2 << 3)
> +
> +#endif
> --
> 1.8.3.2
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


More information about the U-Boot mailing list