[U-Boot] [PATCH v3 8/8] dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage

[Tom Rini]

Add a README to the board which lists the commands required to enable
booting from the eMMC boot partitions found on the board.

Cc: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Tom Rini <trini at ti.com>
---
 board/ti/dra7xx/README       |   25 +++++++++++++++++++++++++
 include/configs/dra7xx_evm.h |    2 ++
 2 files changed, 27 insertions(+)
 create mode 100644 board/ti/dra7xx/README

diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README
new file mode 100644
index 0000000..2fdaeac
--- /dev/null
+++ b/board/ti/dra7xx/README
@@ -0,0 +1,25 @@
+Summary
+=======
+
+This document covers various features of the 'dra7xx_evm' build and some
+related uses.
+
+eMMC boot partition use
+=======================
+
+It is possible, depending on SYSBOOT configuration to boot from the eMMC
+boot partitions using (name depending on documentation referenced)
+Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
+example we load MLO and u-boot.img from the build into DDR and then use
+'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
+set boot0 as the boot device.
+U-Boot # setenv autoload no
+U-Boot # usb start
+U-Boot # dhcp
+U-Boot # mmc dev 1 1
+U-Boot # tftp ${loadaddr} dra7xx/MLO
+U-Boot # mmc write ${loadaddr} 0 100
+U-Boot # tftp ${loadaddr} dra7xx/u-boot.img
+U-Boot # mmc write ${loadaddr} 300 400
+U-Boot # mmc bootbus 1 2 0 2
+U-Boot # mmc partconf 1 1 1 0
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f210ed8..3c53f0a 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -73,6 +73,8 @@
 #define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 
+#define CONFIG_SUPPORT_EMMC_BOOT
+
 /* USB xHCI HOST */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_HOST
-- 
1.7.9.5