[U-Boot] [PATCH] arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)

Stefan Roese sr at denx.de
Fri Feb 14 09:47:17 CET 2014


Patch f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used]
breaks SPL booting on tao3530. Since some gpio input's are
read to detect the board revision. But with this patch above, the
clocks to the GPIO subsystems are not enabled per default any more.
The GPIO banks need to be configured specifically now.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
---
 include/configs/tao3530.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9abfe82..9c04c23 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -83,6 +83,13 @@
 #define CONFIG_OMAP_HSMMC
 #define CONFIG_DOS_PARTITION
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_2		/* GPIO32 ..63  is in GPIO bank 2 */
+#define CONFIG_OMAP3_GPIO_3		/* GPIO64 ..95  is in GPIO bank 3 */
+#define CONFIG_OMAP3_GPIO_4		/* GPIO96 ..127 is in GPIO bank 4 */
+#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+
 /* commands to include */
 #include <config_cmd_default.h>
 
-- 
1.8.5.4



More information about the U-Boot mailing list