[U-Boot] how to get u-boot code with arm64: core support

[Inderpal Singh]

Hi Bhupesh,



On 12 February 2014 13:55, bhupesh.sharma at freescale.com <
bhupesh.sharma at freescale.com> wrote:

>  Hi Inder,
>
>
>
> Could you please check the output of:
>
>
>
> $ echo $ARCH
>

I checked, it gives aarch64.
Anyway if I don't set ARCH properly, the make command fails saying "Failed:
$ARCH=arm, should be 'aarch64' for vexpress_aemv8a".

There seems to be some other problem. I tried with Tiger's toolchain
version as well but I get same issue.

Thanks,
Inder


>
> if it set to some values, unset it using:
>
>
>
> $ unset ARCH
>
>
>
> Regards,
>
> Bhupesh
>
>
>
> *From:* TigerLiu at viatech.com.cn [mailto:TigerLiu at viatech.com.cn]
> *Sent:* Wednesday, February 12, 2014 1:44 PM
> *To:* inderpal.singh at linaro.org
> *Cc:* Sharma Bhupesh-B45370; drambo at broadcom.com; u-boot at lists.denx.de;
> trini at ti.com
>
> *Subject:* Re: [U-Boot] how to get u-boot code with arm64: core support
>
>
>
> Hi, Inder:
>
> >Could it be a toolchain issue? I used the linaro toochain
> gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz<http://releases.linaro.org/latest/components/toolchain/binaries/gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz>at [1].
> Maybe
>
> I use gcc-linaro-aarch64-linux-gnu-4.8-2013.07-1_linux.tar
>
> Best wishes,
>