[U-Boot] Porting a freescale sabrelite-like board to master ?
Thierry Bultel
tbultel at free.fr
Sat Feb 22 21:01:11 CET 2014
Le 22/02/2014 20:20, Wolfgang Denk a écrit :
> Dear Thierry,
>
> In message <5308E4D1.5000509 at free.fr> you wrote:
>> The board I am working on, is based on the Freescale sabrelite board,
>> the manufacturer provides
>> support for it , as an about 1000 lines patch that applies to
>> rel_imx_3.0.35_4.1.0
>> (3.0.35_4.1.0 is the kernel version I am using)
> The kernel version is actually totally uninteresting here. What
> matters is what U-Boot version you have. Let me guess - it is some
> v2009.x - i. e. 5 year old stuff?
Dear Wolfgang,
Sorry for the confusion. I should have been more specific.
What I meant is that my current u-boot version is
tag "rel_imx_3.0.35_4.1.0" from
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git
If I was mentioning the kernel version, it is just to say that switching
to a more recent kernel
version is not an option, because we do not have a device tree BSP for it.
>> So what would be the easiest and time less costing option to achieve
>> what I want to do ?
> It is best to take current code (top of tree in git repository) and
> port it to your hardware from scratch. You can use your old code as
> reference, for example how to set up pin muxing and such. Otherwise
> it is pretty much worthless.
If the sabrelite board would still be supported in master, it would be
straightforward.
So I am thinking about re-bringing support for sabrelite my branch, first.
Best regards
Thierry
>
>
> Best regards,
>
> Wolfgang Denk
>
More information about the U-Boot
mailing list