[U-Boot] [PATCH v3 5/6] config: enable USB ethernet for taskit stamp9g20
Gerhard Sittig
gsi at denx.de
Fri Feb 21 18:32:52 CET 2014
enabling CONFIG_MACB makes other locations in the stamp config file
enable network related commands (actually prevents disabling them)
enable USB ethernet support by activating generic support as well as
Asix and Moschip ethernet adapters
Cc: Markus Hubig <mhubig at imko.de>
Signed-off-by: Gerhard Sittig <gsi at denx.de>
---
v3 is unchanged
v2 changes:
- adjust the Cc: list
v1 introduced this patch
---
include/configs/stamp9g20.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index 51339b1496e6..01085dc5c114 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -140,7 +140,10 @@
* can enable it here if your baseboard features ethernet.
*/
-/* #define CONFIG_MACB */
+#define CONFIG_MACB
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
#ifdef CONFIG_MACB
# define CONFIG_RMII /* use reduced MII inteface */
--
1.7.10.4
More information about the U-Boot
mailing list