[U-Boot] [PATCH] dfu: mmc: Replace calls to u-boot commands with native mmc API

Pantelis Antoniou panto at antoniou-consulting.com
Thu Feb 27 09:39:02 CET 2014


Hi Lukasz,


On Feb 27, 2014, at 10:36 AM, Lukasz Majewski wrote:

> Hi Pantelis,
> 
>> Hi Lukasz,
>> 
>> Looks fine to me. Let me run a few tests over the weekend and I'll
>> apply.
> 
> Have the run test gone smoothly?
> 

In the middle of reworking some core stuff in mmc, will test when that's done.

Regards

-- Pantelis

>> 
>> Thanks
>> 
>> -- Pantelis
>> 
>> On Feb 21, 2014, at 9:23 AM, Lukasz Majewski wrote:
>> 
>>> For some time we have been using the run_command() with properly
>>> crafted string. Such approach turned to be unreliable and error
>>> prone.
>>> 
>>> Switch to "native" mmc subsystem API would allow better type
>>> checking and shall improve speed.
>>> 
>>> Also, it seems that this API is changing less often than u-boot
>>> commands. The approach similar to env operations on the eMMC has
>>> been reused.
>>> 
>>> Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
>>> ---
>>> drivers/dfu/dfu_mmc.c |   31 ++++++++++++++++++++++++-------
>>> 1 file changed, 24 insertions(+), 7 deletions(-)
>>> 
>>> diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
>>> index 0816f46..651cfff 100644
>>> --- a/drivers/dfu/dfu_mmc.c
>>> +++ b/drivers/dfu/dfu_mmc.c
>>> @@ -12,6 +12,7 @@
>>> #include <errno.h>
>>> #include <div64.h>
>>> #include <dfu.h>
>>> +#include <mmc.h>
>>> 
>>> static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
>>> 				dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE];
>>> @@ -20,8 +21,8 @@ static long dfu_file_buf_len;
>>> static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
>>> 			u64 offset, void *buf, long *len)
>>> {
>>> -	char cmd_buf[DFU_CMD_BUF_SIZE];
>>> -	u32 blk_start, blk_count;
>>> +	struct mmc *mmc = find_mmc_device(dfu->dev_num);
>>> +	u32 blk_start, blk_count, n = 0;
>>> 
>>> 	/*
>>> 	 * We must ensure that we work in lba_blk_size chunks, so
>>> ALIGN @@ -38,12 +39,28 @@ static int mmc_block_op(enum dfu_op op,
>>> struct dfu_entity *dfu, return -EINVAL;
>>> 	}
>>> 
>>> -	sprintf(cmd_buf, "mmc %s %p %x %x",
>>> -		op == DFU_OP_READ ? "read" : "write",
>>> -		 buf, blk_start, blk_count);
>>> +	debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n",
>>> __func__,
>>> +	      op == DFU_OP_READ ? "MMC READ" : "MMC WRITE",
>>> dfu->dev_num,
>>> +	      blk_start, blk_count, buf);
>>> +	switch (op) {
>>> +	case DFU_OP_READ:
>>> +		n = mmc->block_dev.block_read(dfu->dev_num,
>>> blk_start,
>>> +					      blk_count, buf);
>>> +		break;
>>> +	case DFU_OP_WRITE:
>>> +		n = mmc->block_dev.block_write(dfu->dev_num,
>>> blk_start,
>>> +					       blk_count, buf);
>>> +		break;
>>> +	default:
>>> +		error("Operation not supported\n");
>>> +	}
>>> 
>>> -	debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf);
>>> -	return run_command(cmd_buf, 0);
>>> +	if (n != blk_count) {
>>> +		error("MMC operation failed");
>>> +		return -EIO;
>>> +	}
>>> +
>>> +	return 0;
>>> }
>>> 
>>> static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long
>>> *len) -- 
>>> 1.7.10.4
>>> 
>> 
> 
> 
> 
> -- 
> Best regards,
> 
> Lukasz Majewski
> 
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group



More information about the U-Boot mailing list