[U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4

Minkyu Kang mk7.kang at samsung.com
Fri Feb 7 08:52:53 CET 2014


On 27/01/14 23:15, Piotr Wilczek wrote:
> This patch adds common board file for Exynos 4 based boards.
> 
> Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  arch/arm/dts/exynos4.dtsi            |  139 +++++++++++++++++++++++++++
>  board/samsung/common/Makefile        |    1 +
>  board/samsung/common/board_exynos4.c |   83 +++++++++++++++++
>  include/configs/exynos4-dt.h         |  170 ++++++++++++++++++++++++++++++++++
>  4 files changed, 393 insertions(+)
>  create mode 100644 arch/arm/dts/exynos4.dtsi
>  create mode 100644 board/samsung/common/board_exynos4.c
>  create mode 100644 include/configs/exynos4-dt.h
> 
> diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
> new file mode 100644
> index 0000000..38a6919
> --- /dev/null
> +++ b/arch/arm/dts/exynos4.dtsi
> @@ -0,0 +1,139 @@
> +/*
> + * Samsung's Exynos4 SoC common device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +
> +	serial at 13800000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13800000 0x3c>;
> +		id = <0>;
> +	};
> +
> +	serial at 13810000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13810000 0x3c>;
> +		id = <1>;
> +	};
> +
> +	serial at 13820000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13820000 0x3c>;
> +		id = <2>;
> +	};
> +
> +	serial at 13830000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13830000 0x3c>;
> +		id = <3>;
> +	};
> +
> +	serial at 13840000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13840000 0x3c>;
> +		id = <4>;
> +	};
> +
> +	i2c at 13860000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <0 0 0>;
> +	};
> +
> +	i2c at 13870000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <1 1 0>;
> +	};
> +
> +	i2c at 13880000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <2 2 0>;
> +	};
> +
> +	i2c at 13890000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <3 3 0>;
> +	};
> +
> +	i2c at 138a0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <4 4 0>;
> +	};
> +
> +	i2c at 138b0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <5 5 0>;
> +	};
> +
> +	i2c at 138c0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <6 6 0>;
> +	};
> +
> +	i2c at 138d0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,s3c2440-i2c";
> +		interrupts = <7 7 0>;
> +	};
> +
> +	sdhci at 12510000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,exynos-mmc";
> +		reg = <0x12510000 0x1000>;
> +		interrupts = <0 75 0>;
> +	};
> +
> +	sdhci at 12520000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,exynos-mmc";
> +		reg = <0x12520000 0x1000>;
> +		interrupts = <0 76 0>;
> +	};
> +
> +	sdhci at 12530000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,exynos-mmc";
> +		reg = <0x12530000 0x1000>;
> +		interrupts = <0 77 0>;
> +	};
> +
> +	sdhci at 12540000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "samsung,exynos-mmc";
> +		reg = <0x12540000 0x1000>;
> +		interrupts = <0 78 0>;
> +	};
> +
> +	gpio: gpio {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
> index 7d2bb8c..25f1e40 100644
> --- a/board/samsung/common/Makefile
> +++ b/board/samsung/common/Makefile
> @@ -12,4 +12,5 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
>  
>  ifndef CONFIG_SPL_BUILD
>  obj-$(CONFIG_BOARD_COMMON)	+= board.o
> +obj-$(CONFIG_BOARD_COMMON_EXYNOS4)	+= board_exynos4.o
>  endif
> diff --git a/board/samsung/common/board_exynos4.c b/board/samsung/common/board_exynos4.c
> new file mode 100644
> index 0000000..2d313e6
> --- /dev/null
> +++ b/board/samsung/common/board_exynos4.c

I don't understand why need exynos4 common board file.
There's already exist board.c that is common board file for samsung.

> @@ -0,0 +1,83 @@
> +/*
> + * (C) Copyright 2014 SAMSUNG Electronics
> + * Piotr Wilczek <p.wilczek at samsung.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <asm/io.h>
> +#include <asm/arch/board.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/mmc.h>
> +#include <asm/arch/pinmux.h>
> +#include <asm/arch/power.h>
> +#include <power/pmic.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> +	int i;
> +	u32 addr;
> +
> +	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> +		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
> +		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
> +	}
> +	return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> +	int i;
> +	u32 addr, size;
> +
> +	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> +		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
> +		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
> +
> +		gd->bd->bi_dram[i].start = addr;
> +		gd->bd->bi_dram[i].size = size;
> +	}
> +}
> +
> +int board_init(void)
> +{
> +#ifdef CONFIG_SYS_SPL_ARGS_ADDR
> +	gd->bd->bi_boot_params = CONFIG_SYS_SPL_ARGS_ADDR;
> +#else
> +	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> +#endif
> +
> +	return exynos_init();
> +}
> +
> +#ifdef CONFIG_OF_CONTROL
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> +	int ret;
> +
> +	/* mmc initializattion for available channels */
> +	ret = exynos_mmc_init(gd->fdt_blob);
> +	if (ret)
> +		debug("mmc init failed\n");
> +
> +	return ret;
> +}
> +#endif
> +#ifdef CONFIG_DISPLAY_BOARDINFO
> +int checkboard(void)
> +{
> +	const char *board_name;
> +
> +	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
> +	printf("Board: %s\n", board_name ? board_name : "Unknown board");
> +
> +	return 0;
> +}
> +#endif
> +#endif
> diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
> new file mode 100644
> index 0000000..aa941f3
> --- /dev/null
> +++ b/include/configs/exynos4-dt.h
> @@ -0,0 +1,170 @@
> +/*
> + * Copyright (C) 2014 Samsung Electronics
> + *
> + * Configuration settings for the SAMSUNG EXYNOS5 board.
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/* High Level Configuration Options */
> +#define CONFIG_SAMSUNG			/* in a SAMSUNG core */
> +#define CONFIG_S5P			/* S5P Family */
> +#define CONFIG_EXYNOS4			/* which is in a Exynos5 Family */
> +#define CONFIG_TIZEN			/* TIZEN lib */

It's a board specific.

> +
> +#include <asm/arch/cpu.h>		/* get chip and board defs */
> +
> +#define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +#define CONFIG_BOARD_COMMON_EXYNOS4
> +
> +/* Enable fdt support */
> +#define CONFIG_OF_CONTROL
> +#define CONFIG_OF_EMBED
> +
> +#define CONFIG_SYS_CACHELINE_SIZE	32
> +
> +/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */
> +#define CONFIG_SYS_CLK_FREQ		24000000
> +
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_CMDLINE_EDITING
> +
> +#include <asm/sizes.h>
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
> +
> +/* select serial console configuration */
> +#define CONFIG_SERIAL2

ditto.

I think you should re-arrange what is common feature (it means soc specific) and what is board specific.
It looks confused to me.
Please fix it. 

Thanks,
Minkyu Kang.


More information about the U-Boot mailing list