[U-Boot] [PATCH] powerpc/t104xrdb, t1040qds : Update FMAN microcode NOR address

York Sun yorksun at freescale.com
Wed Feb 5 21:00:41 CET 2014


On 02/04/2014 10:12 PM, Priyanka Jain wrote:
> FMAN microcode image address range on NOR flash changed from
> (0xeff00000 to 0xebf1ffff) to (0xeff10000 to 0xeff1ffff)
> 
> The change has been done
> - to support FMAN microcode flashing via promjet mechanism as
>  promjet uses address based on offsets. Based on this
>  address of FMAN microcode flash on promjet flash should be 0x0
>  But 0x0 offset is already use for rcw on promjet flash.
>  To take care of  this limitation FMAN microcode address has been
>  changed. Now, FMAN microcode address on promjet flash is 0x10000
> 
> - FMAN microcode is of size 64KB so it will fit into
>  0xeff10000 to 0xeff1ffff.
> 

NACK.

The tool is not broken. I have made a configuration to use PROMJET to download
all images successfully.

York




More information about the U-Boot mailing list