[U-Boot] [PATCH 10/10] ARM: AM43xx: Change DDR3 Reset Value

[Tom Rini]

From: Dave Gerlach <d-gerlach at ti.com>

The bit DDR3_RST_DEF_VAL inside CTRL_DDR_IO represents the default value
of the ddr reset value for DDR3 before the EMIF takes over. We must have
this bit set high so that on exit from DeepSleep0 within the kernel the
reset line has the proper value.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
 arch/arm/cpu/armv7/am33xx/emif4.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index d28fceb..3e39752 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -113,7 +113,7 @@ void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
 	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
 	while ((readl(&cm_device->cm_dll_ctrl) && CM_DLL_READYST) == 0)
 		;
-	writel(0x0, &ddrctrl->ddrioctrl);
+	writel(0x80000000, &ddrctrl->ddrioctrl);
 
 	config_io_ctrl(ioregs);
 
-- 
1.7.9.5