[U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Mon Feb 24 13:29:59 CET 2014
Hi Tom,
On Fri, 21 Feb 2014 14:16:45 -0500, Tom Rini <trini at ti.com> wrote:
> Hey,
>
> The following changes since commit 3e11350255d9c5d4bd03c2a65769da84c05d3294:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2014-02-20 13:16:05 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to 11f296870659e1375e7116a859458b254cc3156f:
>
> ti814x: Fix illegal use of FP ops in clock_ti814x.c (2014-02-21 14:03:44 -0500)
>
> ----------------------------------------------------------------
> Dave Gerlach (1):
> ARM: AM43xx: GP-EVM: Correct GPIO used for VTT regulator control
>
> Hannes Petermaier (2):
> board: Add support for B&R T-Series Motherboard
> Add support for B&R KWB Motherboard
>
> Janne Grunau (1):
> ARM: OMAP4: fix DDR timings for OMAP4430 ES2.0
>
> Lothar Felten (1):
> am335x: Initial support for Silica Pengwyn board
>
> Måns Rullgård (1):
> ti814x: Fix illegal use of FP ops in clock_ti814x.c
>
> Nishanth Menon (2):
> DRA7: fix ABB efuse offset for OPP_NOM
> omap4_common: config: remove I2C for SPL mode
>
> Stefan Roese (2):
> arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)
> arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT Linux booting
>
> Stefano Babic (3):
> OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
> omap3: fix pinmux for mcx board
> OMAP3: fix default environment for mcx board
>
> Tom Rini (3):
> am335x_evm: Enable GPT commands
> am43xx_evm: Enable GPT commands
> dra7xx_evm: Enable GPT commands
>
> arch/arm/cpu/armv7/am33xx/board.c | 6 +-
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 2 +
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 5 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 18 ++
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 12 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 16 ++
> arch/arm/include/asm/arch-am33xx/gpio.h | 4 +-
> board/BuR/common/bur_common.h | 22 +++
> board/BuR/common/common.c | 216 ++++++++++++++++++++++
> board/BuR/kwb/Makefile | 12 ++
> board/BuR/kwb/board.c | 240 ++++++++++++++++++++++++
> board/BuR/kwb/mux.c | 195 ++++++++++++++++++++
> board/BuR/tseries/Makefile | 14 ++
> board/BuR/tseries/board.c | 147 +++++++++++++++
> board/BuR/tseries/mux.c | 225 +++++++++++++++++++++++
> board/htkw/mcx/mcx.h | 2 -
> board/silica/pengwyn/Makefile | 13 ++
> board/silica/pengwyn/board.c | 207 +++++++++++++++++++++
> board/silica/pengwyn/board.h | 15 ++
> board/silica/pengwyn/mux.c | 98 ++++++++++
> board/ti/am43xx/board.c | 16 +-
> board/ti/am43xx/mux.c | 6 +-
> boards.cfg | 5 +
> include/configs/am335x_evm.h | 13 ++
> include/configs/am43xx_evm.h | 9 +
> include/configs/bur_am335x_common.h | 197 ++++++++++++++++++++
> include/configs/cm_t35.h | 7 -
> include/configs/dra7xx_evm.h | 11 ++
> include/configs/kwb.h | 128 +++++++++++++
> include/configs/mcx.h | 9 +-
> include/configs/pengwyn.h | 208 +++++++++++++++++++++
> include/configs/tao3530.h | 7 +
> include/configs/ti_am335x_common.h | 1 -
> include/configs/ti_omap4_common.h | 6 +
> include/configs/tseries.h | 265 +++++++++++++++++++++++++++
> 36 files changed, 2323 insertions(+), 36 deletions(-)
> create mode 100644 board/BuR/common/bur_common.h
> create mode 100644 board/BuR/common/common.c
> create mode 100644 board/BuR/kwb/Makefile
> create mode 100644 board/BuR/kwb/board.c
> create mode 100644 board/BuR/kwb/mux.c
> create mode 100644 board/BuR/tseries/Makefile
> create mode 100644 board/BuR/tseries/board.c
> create mode 100644 board/BuR/tseries/mux.c
> create mode 100644 board/silica/pengwyn/Makefile
> create mode 100644 board/silica/pengwyn/board.c
> create mode 100644 board/silica/pengwyn/board.h
> create mode 100644 board/silica/pengwyn/mux.c
> create mode 100644 include/configs/bur_am335x_common.h
> create mode 100644 include/configs/kwb.h
> create mode 100644 include/configs/pengwyn.h
> create mode 100644 include/configs/tseries.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list