[U-Boot] [PATCH 8/8] arm/km: introduce kmsugp1 target
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Feb 13 16:21:21 CET 2014
Hi Holger,
On Mon, 27 Jan 2014 16:58:29 +0100, Holger Brunck
<holger.brunck at keymile.com> wrote:
> From: Gerlando Falauto <gerlando.falauto at keymile.com>
>
> KMSUGP1 is from a u-boot perspective (almost) identical to KMNUSA.
> The only difference is that the PCIe reset is connected to Kirkwood pin
> MPP7_PEX_RST_OUTn, we use a dedicated config flag KM_PCIE_RESET_MPP7.
> Such pin should theoretically be handled by the PCIe subsystem
> automatically, but this turned out not to be the case.
> So simply configure this PIN as a GPIO and issue a pulse manually.
>
> Signed-off-by: Gerlando Falauto <gerlando.falauto at keymile.com>
> Cc: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> Cc: Valentin Longchamp <valenting.longchamp at keymile.com>
> Cc: Holger Brunck <holger.brunck at keymile.com>
> ---
This one does not apply properly on u-boot-arm/master. Can you look
into this and post a V2 (of just 8/8) ?
Amicalement,
--
Albert.
More information about the U-Boot
mailing list