[U-Boot] [RFC] try to merge different i.MX environment

[Stefano Babic]

Hi Dennis,

On 14/02/2014 17:14, Dennis Gilmore wrote:
> On Fri, 14 Feb 2014 16:06:55 +0100
> Stefano Babic <sbabic at denx.de> wrote:
> 
>> Signed-off-by: Stefano Babic <sbabic at denx.de>
>> CC: Fabio Estevam <fabio.estevam at freescale.com>
>> CC: Otavio Salvador <otavio at ossystems.com.br>
>> CC: Marek Vasut <marex at denx.de>
>> CC: Leo Sartre <lsartre at adeneo-embedded.com>
>> CC: Jon Nettleton <jon.nettleton at gmail.com>
>> CC: Eric Nelson <eric.nelson at boundarydevices.com>
>> CC: b18965 at freescale.com
>>
>> Hi everybody,
>>
>> the current built-in environment in most i.MX boards is very similar.
>> Even if I always thought that the default environemt is something
>> that the user want always customize, I see from all you submitters
>> the not hidden desire to have such a common default environment for
>> all boards. At least, for i.MX boards.
>> Checking in the board configuration files, I see at least the
>> following boards that hase "quite" the same built-in environment:
>>
> 
> I'm working on building a common set environment based on the work by
> Stephen Warren for tegra, that would provide for a very usable
> experience.
> 
> Its the next step forward from the distro config options. Id rather us
> get a solution that works across the board than something different per
> soc family.

Fully agree. I will check again tegra-common-post.h. As far as I have
understood, the built-in environment for Tegra sets a minimal set of
rules and scripts that allow to load a full environment from another
script stored on a media (mmc or usb). This is also a good statement,
because the environment is not so fine defined and let easy customization.

> looking at how tegra is being done should provide a solid
> guide.

Thanks,
Stefano



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================