[U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Thu Jan 2 17:25:29 CET 2014
Hi Albert,
my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !
The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 02229827804980e3cce48bf4fce43699046bcf7e:
mx6: soc: Disable VDDPU regulator (2014-01-02 17:16:51 +0100)
----------------------------------------------------------------
Eric Nelson (8):
i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
i.MX6DQ/DLS: remove useless mux/pad declarations
i.MX6DQ: Add Pinmux settings that are present in mainline and
Dual-Lite/Solo
i.MX6DQ/DLS: remove unused pad declarations
i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
imx-common: remove extraneous semicolon from macro
i.MX6 (DQ/DLS): use macros for mux and pad declarations
ARM: mx6: Update non-Freescale boards to include CPU errata.
Fabio Estevam (24):
configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
wandboard: Return the error immediately when ipuv3_fb_init() fails
wandboard: Return the error when cpu_eth_init() fails
titanium: Return the error when cpu_eth_init() fails
nitrogen6x: Remove unused OCOTP options
mx51evk: Fix pmic_init() argument
mx31pdk: Fix pmic_init() argument
efikamx: Fix pmic_init() argument
power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
mx6sabresd: Fix wrong colors in LVDS splash
mx6sabresd: Add SPI NOR support
imx: Explicitly pass the I2C bus number in pmic_init()
configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
mx6: clock: Fix the calculation of PLL_ENET frequency
mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
mx6sabresd: Fix LVDS width and color format
doc: README.fuse: Add an example on how to use the fuse API on mx6q
mx6sabre_common.h: Add CONFIG_CMD_FUSE support
mx6: soc: Staticize set_vddsoc()
mx6: soc: Clear the LDO ramp values up prior to setting the LDO
voltages
mx6: soc: Set the VDDSOC at 1.175 V
mx6: soc: Introduce set_ldo_voltage()
mx6: soc: Add the required LDO ramp up delay
mx6: soc: Disable VDDPU regulator
Frank Li (1):
imx6: fix random hang when download by usb
Giuseppe Pagano (5):
udoo: Move and optimize platform register setting.
udoo: Add ethernet support (FEC + Micrel KSZ9031).
udoo: Fix watchdog during kernel boot.
nitrogen6x: Move setup_sata to common part
udoo: Add SATA support on uDoo Board.
Liu Ying (1):
MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
Marek Vasut (3):
Net: FEC: Fix huge memory leak
ARM: mx53: video: Add IPUv3 LCD support for M53EVK
ARM: mxs: tools: Fix errno handling in strtoul() invocation
Michael Heimpold (1):
mxs_gpio: fix the handling in gpio_direction_output()
Stefan Roese (1):
mx6: titanium: Move BSP code to barco board directory
Stefano Babic (1):
MX6: fix sata compilation for i.MX6
arch/arm/cpu/armv7/mx6/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/soc.c | 110 +-
arch/arm/imx-common/Makefile | 3 +
arch/arm/imx-common/cpu.c | 4 +-
arch/arm/imx-common/sata.c | 34 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 23 +
arch/arm/include/asm/arch-mx6/mx6-pins.h | 33 +-
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2728
+++++++++-------------
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 2642
++++++++-------------
arch/arm/include/asm/arch-mx6/sys_proto.h | 2 -
arch/arm/include/asm/imx-common/sata.h | 16 +
board/{freescale => barco}/titanium/Makefile | 0
board/{freescale => barco}/titanium/imximage.cfg | 0
board/{freescale => barco}/titanium/titanium.c | 110 +-
board/boundary/nitrogen6x/nitrogen6x.c | 197 +-
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 40 +-
board/denx/m53evk/m53evk.c | 73 +
board/freescale/mx25pdk/mx25pdk.c | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 2 +-
board/freescale/mx35pdk/mx35pdk.c | 2 +-
board/freescale/mx51evk/mx51evk.c | 2 +-
board/freescale/mx53evk/mx53evk.c | 2 +-
board/freescale/mx53loco/mx53loco.c | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 68 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 62 +-
board/freescale/mx6sabresd/mx6sabresd.c | 155 +-
board/genesi/mx51_efikamx/efikamx.c | 2 +-
board/udoo/1066mhz_4x256mx16.cfg | 55 +
board/udoo/clocks.cfg | 32 +
board/udoo/ddr-setup.cfg | 87 +
board/udoo/udoo.c | 165 +-
board/udoo/udoo.cfg | 29 +
board/wandboard/wandboard.c | 60 +-
boards.cfg | 4 +-
doc/README.imx6 | 76 +
drivers/gpio/mxs_gpio.c | 4 +-
drivers/net/fec_mxc.c | 177 +-
drivers/power/power_fsl.c | 3 +-
include/configs/imx31_phycore.h | 1 -
include/configs/m53evk.h | 16 +
include/configs/mx25pdk.h | 2 -
include/configs/mx28evk.h | 1 -
include/configs/mx31pdk.h | 1 -
include/configs/mx35pdk.h | 2 -
include/configs/mx51evk.h | 1 -
include/configs/mx53ard.h | 1 -
include/configs/mx53evk.h | 2 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 2 -
include/configs/mx6_common.h | 1 +
include/configs/mx6qarm2.h | 1 -
include/configs/mx6sabre_common.h | 18 +-
include/configs/nitrogen6x.h | 11 +-
include/configs/titanium.h | 1 +
include/configs/udoo.h | 29 +
include/configs/wandboard.h | 1 +
include/micrel.h | 5 +
tools/mxsimage.c | 1 +
59 files changed, 3346 insertions(+), 3762 deletions(-)
create mode 100644 arch/arm/imx-common/sata.c
create mode 100644 arch/arm/include/asm/imx-common/sata.h
rename board/{freescale => barco}/titanium/Makefile (100%)
rename board/{freescale => barco}/titanium/imximage.cfg (100%)
rename board/{freescale => barco}/titanium/titanium.c (66%)
create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
create mode 100644 board/udoo/clocks.cfg
create mode 100644 board/udoo/ddr-setup.cfg
create mode 100644 board/udoo/udoo.cfg
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list