January 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jan 1 02:23:37 CET 2014
Ending: Fri Jan 31 22:57:55 CET 2014
Messages: 2439

• [U-Boot] [PATCH] wandboard: Set default environment to use zImage   Wolfgang Denk
• [U-Boot] [PATCH v2] wandboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH] wandboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access   Marek Vasut
• [U-Boot] [PATCH V2 7/7] CONFIG: SMDK5420: Enable FIMD and DP   Minkyu Kang
• [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Minkyu Kang
• [U-Boot] Fwd: Re: [PATCH V2 1/7] exynos_fb: Remove usage of static defines   Minkyu Kang
• [U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Chin Liang See
• [U-Boot] [PATCH V2 7/7] CONFIG: SMDK5420: Enable FIMD and DP   Ajay kumar
• [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay kumar
• [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver   Rajeshwari Birje
• [U-Boot] [PATCH v2 12/13] trats2: add LCD download menu support   Minkyu Kang
• [U-Boot] [PATCH v2 06/13] common: makefile: Add optional cflags to object: common/lcd.o   Minkyu Kang
• [U-Boot] [PATCH v2 02/13] trats: add optional cflags to board object file.   Minkyu Kang
• [U-Boot] [PATCH v2 01/13] s5p: gpio: change gpio coding method for s5p gpio.   Minkyu Kang
• [U-Boot] [PATCH v2 04/13] samsung: common: Add misc file and common function misc_init_r().   Minkyu Kang
• [U-Boot] [PATCH 1/4] power: Add support for TPS65090 PMU chip.   Minkyu Kang
• [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver   Minkyu Kang
• [U-Boot] [PATCH v2 01/13] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH v2 02/13] trats: add optional cflags to board object file.   Przemyslaw Marczak
• [U-Boot] [PATCH v2 04/13] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v2 0/2] Add usb ethernet support for Arndale   Inderpal Singh
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Inderpal Singh
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Inderpal Singh
• [U-Boot] Interrupts in U-Boot   Parimala Baggiri
• [U-Boot] [PATCH v2 2/6] mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages   Stefano Babic
• [U-Boot] [PATCH v2 3/6] mx6: soc: Set the VDDSOC at 1.175 V   Stefano Babic
• [U-Boot] [PATCH v2 4/6] mx6: soc: Introduce set_ldo_voltage()   Stefano Babic
• [U-Boot] [PATCH v2 5/6] mx6: soc: Add the required LDO ramp up delay   Stefano Babic
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Stefano Babic
• [U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc()   Stefano Babic
• [U-Boot] [PATCH v3 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q   Stefano Babic
• [U-Boot] [PATCH v3 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] Are mmc open/close subcommands needed?   Hector Palacios
• [U-Boot] [PATCH 1/2] mx6: Add initial support for the Hummingboard solo   Fabio Estevam
• [U-Boot] [PATCH 2/2] net: phy: atheros: Fix the masks for AR8031/8035   Fabio Estevam
• [U-Boot] [PATCH] powerpc/83xx: fix compilation error for MPC8315ERDB   York Sun
• [U-Boot] [PATCH v3] t2080qds/ddr: update ddr parameters   York Sun
• [U-Boot] [PATCH v3 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Scott Wood
• [U-Boot] [PATCH][v2] powerpc/t1040qds: Update DDR initialization related settings   York Sun
• [U-Boot] Are mmc open/close subcommands needed?   Marek Vasut
• [U-Boot] [PATCH V3 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
• [U-Boot] [PATCH V3 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
• [U-Boot] [PATCH] board/t1040qds: Fix typo in t1040_pbi.cfg file   York Sun
• [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL   York Sun
• [U-Boot] [PATCH] board/t1040qds: Relax IFC FPGA timings   York Sun
• [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL   Scott Wood
• [U-Boot] [PATCH][v4] powerpc/mpc85xx: Add support for single source clocking   York Sun
• [U-Boot] [PATCH 1/2] powerpc/P1022DS: Define new nand_ecclayout structure macros   York Sun
• [U-Boot] [PATCH 2/2] powerpc/B4860QDS: Define new nand_ecclayout structure macros   York Sun
• [U-Boot] [PATCH] powerpc/t208x: fix macro CONFIG_SYS_FSL_NUM_USB_CTRLS   York Sun
• [U-Boot] [u-boot-release] [PATCH] powerpc/cms700: limit NAND data structure size   York Sun
• [U-Boot] [u-boot-release] [PATCH] powerpc/t4240: enable NAND boot support   York Sun
• [U-Boot] [u-boot-release] [PATCH] powerpc/cms700: limit NAND data structure size   Scott Wood
• [U-Boot] [u-boot-release] [PATCH] powerpc/b4860/pbl: fix rcw cfg   York Sun
• [U-Boot] [PATCH][v2] board/t1040qds: Enable memory reset control   York Sun
• [U-Boot] linkstation_HGLAN and MPC824x support   York Sun
• [U-Boot] linkstation_HGLAN and MPC824x support   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Marek Vasut
• [U-Boot] [PATCH V3 2/6] power: Explicitly select pmic device's bus   Minkyu Kang
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Inderpal Singh
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Inderpal Singh
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] powerpc/t208x: enable erratum a006379 for t208x   Shengzhou Liu
• [U-Boot] [PATCH][v3] powerpc/t1040qds: Update DDR initialization related settings   Priyanka Jain
• [U-Boot] _POST_WORD_ADDR in post.h   shobin b
• [U-Boot] [PATCH][v2] powerpc/83xx: Add support for get_svr() for 83xx devices   Nikhil Badola
• [U-Boot] [PATCH v2] powerpc/t2080qds: some update for t2080qds   Shengzhou Liu
• [U-Boot] [PATCH 1/2] net: gem: Check if phy was correctly detected   Michal Simek
• [U-Boot] [PATCH 2/2] net: axi_emac: Check if phy was correctly detected   Michal Simek
• [U-Boot] [PATCH 1/2] zynq: Do not explicitely enable icache   Michal Simek
• [U-Boot] [PATCH 2/2] zynq: Enable dcache support   Michal Simek
• [U-Boot] [PATCH v1 1/2] i2c: zynq: Support for 0-length register address   Michal Simek
• [U-Boot] [PATCH v1 2/2] i2c: zynq: Add support for the second i2c controller   Michal Simek
• [U-Boot] [PATCH 1/2] mx6: Add initial support for the Hummingboard solo   Stefano Babic
• [U-Boot] [PATCH 2/2] net: phy: atheros: Fix the masks for AR8031/8035   Stefano Babic
• [U-Boot] [PATCH v1 0/24] Zynq DT changes   Michal Simek
• [U-Boot] [PATCH v1 01/24] net: emaclite: Fix OF initialization   Michal Simek
• [U-Boot] [PATCH v1 02/24] net: gem: Add OF initialization support   Michal Simek
• [U-Boot] [PATCH v1 03/24] mmc: zynq: Add OF initialization support   Michal Simek
• [U-Boot] [PATCH v1 04/24] zynq: Add OF ram initialization support   Michal Simek
• [U-Boot] [PATCH v1 05/24] gpio: zynq: Add dummy gpio routines   Michal Simek
• [U-Boot] [PATCH v1 06/24] zynq: Enable CONFIG_FIT_VERBOSE   Michal Simek
• [U-Boot] [PATCH v1 07/24] zynq: Enable Boot FreeBSD/vxWorks   Michal Simek
• [U-Boot] [PATCH v1 08/24] zynq: Cleanup on miscellaneous configs   Michal Simek
• [U-Boot] [PATCH v1 09/24] zynq: Cleanup on memory configs   Michal Simek
• [U-Boot] [PATCH v1 10/24] zynq: Minor config cleanup   Michal Simek
• [U-Boot] [PATCH v1 11/24] zynq: Enable cache options   Michal Simek
• [U-Boot] [PATCH v1 12/24] zynq: serial: Simplify serial driver initialization   Michal Simek
• [U-Boot] [PATCH v1 13/24] serial: zynq: Add OF initialization support   Michal Simek
• [U-Boot] [PATCH v1 14/24] zynq: Add GEM0, GEM1 configs support   Michal Simek
• [U-Boot] [PATCH v1 15/24] zynq-common: Define exact TEXT_BASE   Michal Simek
• [U-Boot] [PATCH v1 16/24] zynq: Add Catalyst 24WC08 EEPROM config support   Michal Simek
• [U-Boot] [PATCH v1 17/24] zynq-common: Define default environment   Michal Simek
• [U-Boot] [PATCH v1 18/24] zynq-common: Change Env. Sector size to 128Kb   Michal Simek
• [U-Boot] [PATCH v1 19/24] zynq-common: Define flash env. partition   Michal Simek
• [U-Boot] [PATCH v1 20/24] zynq-common: Define CONFIG_ENV_OVERWRITE   Michal Simek
• [U-Boot] [PATCH v1 21/24] zynq: Add support to find bootmode   Michal Simek
• [U-Boot] [PATCH v1 22/24] dts: zynq: Add fdt support   Michal Simek
• [U-Boot] [PATCH v1 23/24] zynq-common: Enable verified boot(RSA)   Michal Simek
• [U-Boot] [PATCH v1 24/24] doc: zynq: Add information on zynq u-boot   Michal Simek
• [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support   Michal Simek
• [U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers   Vivek Gautam
• [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function   Vivek Gautam
• [U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers   Vivek Gautam
• [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function   Vivek Gautam
• [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support   Jagan Teki
• [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support   Michal Simek
• [U-Boot] [PATCH 1/2] mx6: Add initial support for the Hummingboard solo   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6: Add initial support for the Hummingboard solo   Stefano Babic
• [U-Boot] [PATCH v1 0/24] Zynq DT changes   Russell King - ARM Linux
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Gupta, Pekon
• [U-Boot] [PATCH 1/2] zynq: Do not explicitely enable icache   Arnd Bergmann
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Artem Bityutskiy
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Stefano Babic
• [U-Boot] [PATCH 1/2] zynq: Do not explicitely enable icache   Russell King - ARM Linux
• [U-Boot] [PATCH v3 2/8] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Stefano Babic
• [U-Boot] [PATCH v3 3/8] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Stefano Babic
• [U-Boot] [PATCH v3 4/8] mx28evk: Use 512k for fdt partition to align it   Stefano Babic
• [U-Boot] [PATCH v3 5/8] mx28evk: Add 'nandboot' environment command   Stefano Babic
• [U-Boot] [PATCH v3 6/8] mx28evk: Extend environment to easy write of NAND system   Stefano Babic
• [U-Boot] [PATCH v3 7/8] ARM: mx6: Change the FDT loading address to avoid overlaping   Stefano Babic
• [U-Boot] [PATCH v3 8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6   Stefano Babic
• [U-Boot] [PATCH v4] arm: mx5: Add fuse supply enable in fsl_iim   Stefano Babic
• [U-Boot] [PATCH v3 2/8] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Stefano Babic
• [U-Boot] [PULL-Update] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 02/12] trats2: Code cleanup.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v3 04/12] samsung: misc: move display logo function to misc.c file.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 05/12] common: lcd.c: fix data abort exception when try to access bmp header   Przemyslaw Marczak
• [U-Boot] [PATCH v3 06/12] lib: tizen: change Tizen logo with the new one.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 07/12] video: exynos: fimd: add support for various display color modes   Przemyslaw Marczak
• [U-Boot] [PATCH v3 08/12] samsung: boards: update display configs with 16bpp mode.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 10/12] Trats: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 12/12] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 10/12] Trats: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 12/12] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 12/12] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] Are mmc open/close subcommands needed?   Otavio Salvador
• [U-Boot] [PATCH v3 1/8] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
• [U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] net: phy: atheros: Fix the masks for AR8031/8035   Fabio Estevam
• [U-Boot] [PATCH v4 1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Otavio Salvador
• [U-Boot] [PATCH v4 2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
• [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH] powerpc/83xx: fix compilation error for MPC8315ERDB   Scott Wood
• [U-Boot] [PATCH] powerpc/t208x: enable erratum a006379 for t208x   Scott Wood
• [U-Boot] [PATCH] powerpc/t208x: enable erratum a006379 for t208x   York Sun
• [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage   Wolfgang Denk
• [U-Boot] MAKEALL   York Sun
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
• [U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers   Marek Vasut
• [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Marek Vasut
• [U-Boot] [PATCH] edid: add function to convert edid to fb_videomode   Christian Gmeiner
• [U-Boot] [PATCH] edid: add function to convert edid to fb_videomode   Wolfgang Denk
• [U-Boot] MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH] edid: add function to convert edid to fb_videomode   Christian Gmeiner
• [U-Boot] [PATCH] edid: add function to convert edid to fb_videomode   Gerhard Sittig
• [U-Boot] Pull request: u-boot-spi/master-xlnx   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 00/12] sf: Add Extended read and quad read/write commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 01/12] sf: Add extended read commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 02/12] sf: Add quad read/write commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 03/12] sf: ops: Add configuration register writing support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 04/12] sf: Set quad enable bit support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 05/12] sf: probe: Enable RD_FULL and WR_QPP   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 06/12] sf: Separate the flash params table   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 07/12] sf: Add QUAD_IO_FAST read support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 09/12] sf: Add macronix set QEB support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 10/12] sf: probe: Enable macronix quad read/write cmds support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 11/12] sf: Divide flash register ops from QEB code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v6 12/12] sf: Code cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/6] wandboard: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 2/6] titanium: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 3/6] mx6qarm2: Remove unneeded error message when cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH 4/6] mx6qsabreauto: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 5/6] mx6sabresd: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 6/6] mx6slevk: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 3/6] mx6qarm2: Remove unneeded error message when cpu_eth_init() fails   Wolfgang Denk
• [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage   Dennis Gilmore
• [U-Boot] [PATCH v2 1/6] wandboard: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH v2 2/6] titanium: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH v2 3/6] mx6qarm2: Remove unneeded error message when cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH v2 4/6] mx6qsabreauto: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH v2 5/6] mx6sabresd: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6slevk: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] [PATCH 3/6] mx6qarm2: Remove unneeded error message when cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage   Wolfgang Denk
• [U-Boot] [PATCH] omap3: Derive config for Beagleboard-XM sans NAND support   Sanjeev Premi
• [U-Boot] [PATCH v2 0/4] sf: Add nr_flash support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 1/4] sf: ops: Unify read_ops bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/4] sf: Add dual memories support - DUAL_STACKED   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 3/4] sf: Add dual memories support - DUAL_PARALLEL   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 4/4] sf: Add CONFIG_SF_NR_FLASH   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function   Minkyu Kang
• [U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers   Minkyu Kang
• [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition   Zhang Haijun
• [U-Boot] [PATCH 1/7 V5] mmc: Add some usefull macro definition   Zhang Haijun
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Zhang Haijun
• [U-Boot] [PATCH v3 05/12] common: lcd.c: fix data abort exception when try to access bmp header   Minkyu Kang
• [U-Boot] [PATCH] powerpc/85xx: update erratum a006379   Shengzhou Liu
• [U-Boot] [PATCH v4 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Po Liu
• [U-Boot] [PATCH v4 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL   Po Liu
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Inderpal Singh
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Inderpal Singh
• [U-Boot] [PATCH] Remove obsolte _LINUX_CONFIG_H macro   Masahiro Yamada
• [U-Boot] [PATCH v2] Remove obsolete _LINUX_CONFIG_H macro   Masahiro Yamada
• [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support   Sourav Poddar
• [U-Boot] [PATCH] sh: delete redundant CONFIG_SH definition   Masahiro Yamada
• [U-Boot] [PATCH] avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk   Masahiro Yamada
• [U-Boot] [PATCH v2 2/6] titanium: Return from cpu_eth_init() directly   Stefan Roese
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Sourav Poddar
• [U-Boot] [PATCH v6 11/12] sf: Divide flash register ops from QEB code   Sourav Poddar
• [U-Boot] How to make Loading and Decompression parallel in u-boot   Ramappa
• [U-Boot] [PATCH v6 00/12] sf: Add Extended read and quad read/write commands support   Sourav Poddar
• [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support   Jagan Teki
• [U-Boot] [PATCH v6 11/12] sf: Divide flash register ops from QEB code   Jagan Teki
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Gupta, Pekon
• [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support   Sourav Poddar
• [U-Boot] [PATCH v6 11/12] sf: Divide flash register ops from QEB code   Sourav Poddar
• [U-Boot] [PULL-Update] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v3 05/12] common: lcd.c: fix data abort exception when try to access bmp header   Anatolij Gustschin
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH] t2080qds/ddr: update ddr parameters   Shengzhou Liu
• [U-Boot] [PATCH 0/8] Exynos5420: Add support for XHCI controller   Vivek Gautam
• [U-Boot] [PATCH 1/8] arm: exynos5420: Fix base address for USBPHY   Vivek Gautam
• [U-Boot] [PATCH 2/8] arm: exynos5420: Add base addresses for USB 3.0   Vivek Gautam
• [U-Boot] [PATCH 3/8] dts: exynos5250: Remove explicit device node of 'xhci'   Vivek Gautam
• [U-Boot] [PATCH 4/8] config: exynos5: Enable XHCI on all Exynos5 systems   Vivek Gautam
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Vivek Gautam
• [U-Boot] [PATCH 6/8] dts: exynos5420: Move device node for xhci 2nd controller   Vivek Gautam
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Vivek Gautam
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Vivek Gautam
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Jagan Teki
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Sourav Poddar
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Jagan Teki
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Sourav Poddar
• [U-Boot] [PATCH v6 08/12] sf: Discover read dummy_cycles   Jagan Teki
• [U-Boot] [PATCH] ARM: HYP/non-sec: Propagate stack pointer to hyp mode   Marc Zyngier
• [U-Boot] uboot post for arm   shobin
• [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Minkyu Kang
• [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio.   Minkyu Kang
• [U-Boot] [PATCH v3 09/12] samsung: misc: Add LCD download menu.   Minkyu Kang
• [U-Boot] [PATCH] ARM: HYP/non-sec: Propagate stack pointer to hyp mode   Ian Campbell
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Stefan Roese
• [U-Boot] [PATCH V4 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420   Leela Krishna Amudala
• [U-Boot] [PATCH V4 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
• [U-Boot] [PATCH V4 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
• [U-Boot] [PATCH V4 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Leela Krishna Amudala
• [U-Boot] [PATCH V4 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Leela Krishna Amudala
• [U-Boot] [PATCH V4 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
• [U-Boot] [PATCH V4 6/6] config: SMDK5420: Enable S2MPS11 pmic   Leela Krishna Amudala
• [U-Boot] uboot post for arm   Michael Trimarchi
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()   Fabio Estevam
• [U-Boot] [PATCH 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6slevk: Include "mx6_common.h"   Fabio Estevam
• [U-Boot] linkstation_HGLAN and MPC824x support   Tom Rini
• [U-Boot] Question: booting Linux from ext4 mmc partition   nidalpres
• [U-Boot] [PATCH v5 1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Otavio Salvador
• [U-Boot] [PATCH v5 2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
• [U-Boot] [PATCH v5 3/3] wandboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support   Marek Vasut
• [U-Boot] [PATCH 1/8] arm: exynos5420: Fix base address for USBPHY   Marek Vasut
• [U-Boot] [PATCH 2/8] arm: exynos5420: Add base addresses for USB 3.0   Marek Vasut
• [U-Boot] [PATCH 3/8] dts: exynos5250: Remove explicit device node of 'xhci'   Marek Vasut
• [U-Boot] [PATCH 4/8] config: exynos5: Enable XHCI on all Exynos5 systems   Marek Vasut
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Marek Vasut
• [U-Boot] [PATCH 6/8] dts: exynos5420: Move device node for xhci 2nd controller   Marek Vasut
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Marek Vasut
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Marek Vasut
• [U-Boot] linkstation_HGLAN and MPC824x support   York Sun
• [U-Boot] linkstation_HGLAN and MPC824x support   Tom Rini
• [U-Boot] [PATCH] t2080qds/ddr: update ddr parameters   York Sun
• [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master-xlnx   Jagan Teki
• [U-Boot] [U-BOOT PATCH v7 08/12] sf: Discover read dummy_byte   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 0/4] sf: Add support to access dual flash memory   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 1/4] sf: ops: Unify read_ops bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 2/4] sf: Add dual memories support - DUAL_STACKED   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 3/4] sf: Add dual memories support - DUAL_PARALLEL   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 4/4] sf: Add CONFIG_SF_DUAL_FLASH   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] omap3: Derive config for Beagleboard-XM sans NAND support   Tom Rini
• [U-Boot] [PATCH] spi: sh_spi: Use sh_spi_clear_bit() instead of open-coded   Jagan Teki
• [U-Boot] [PATCH v5 2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board   Fabio Estevam
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix a typo in workaround message for DDR erratum A003474   York Sun
• [U-Boot] [PATCH] i.MX6: Ensure AHB clock is 132MHz in low freq boot mode   Anson Huang
• [U-Boot] [PATCH] i.MX6: Ensure AHB clock is 132MHz in low freq boot mode   Anson Huang
• [U-Boot] [PATCH] sh: delete redundant CONFIG_SH definition   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: delete redundant CONFIG_SH definition   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spi: sh_qspi: Add base register address   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs   Minkyu Kang
• [U-Boot] [PATCH v5 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Po Liu
• [U-Boot] [PATCH v5 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL   Po Liu
• [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys   Minkyu Kang
• [U-Boot] [PATCH] spi: sh_qspi: Add base register address   Jagan Teki
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Minkyu Kang
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Vivek Gautam
• [U-Boot] [PATCH] spi: sh_qspi: Add base register address   Nobuhiro Iwamatsu
• [U-Boot] Are mmc open/close subcommands needed?   Hector Palacios
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Marek Vasut
• [U-Boot] [PATCH V4 6/6] config: SMDK5420: Enable S2MPS11 pmic   Minkyu Kang
• [U-Boot] [PATCH V4 5/6] exynos: Add a common DT based PMIC driver initialization   Minkyu Kang
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Vivek Gautam
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Vivek Gautam
• [U-Boot] [PATCH 0/3] Cleanup of boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH 1/3] cosmetic: boards.cfg: remove a trailing empty line   Masahiro Yamada
• [U-Boot] [PATCH 2/3] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Masahiro Yamada
• [U-Boot] [PATCH 3/3] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Marek Vasut
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Vivek Gautam
• [U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller   Marek Vasut
• [U-Boot] [PATCH] avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk   Andreas Bießmann
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Vivek Gautam
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Vivek Gautam
• [U-Boot] [PATCH] i.MX6: Ensure AHB clock is 132MHz in low freq boot mode   Fabio Estevam
• [U-Boot] [PATCH] i.MX6: Ensure AHB clock is 132MHz in low freq boot mode   Hui.Liu at freescale.com
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Marek Vasut
• [U-Boot] [PATCH 8/8] config: smdk5420: Enable support for multiple XHCI controllers   Marek Vasut
• [U-Boot] [PATCH 5/8] usb: xhci-exynos5: Add support for multiple USB 3.0 controllers   Vivek Gautam
• [U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()   Stefano Babic
• [U-Boot] [PATCH v3 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH] i.MX6: Ensure AHB clock is 132MHz in low freq boot mode   Stefano Babic
• [U-Boot] Question: booting Linux from ext4 mmc partition   Robert Nelson
• [U-Boot] "arm: keep all sections in ELF file" breaks Arndale   Andre Przywara
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Przemyslaw Marczak
• [U-Boot] [PATCH 1/1] ARM: dra7_evm: read mac address properly from e-fuse   Mugunthan V N
• [U-Boot] [PATCH 3/3] boards.cfg: Delete the equivalent entries   Wolfgang Denk
• [U-Boot] [PULL] u-boot-onenand/master   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Gupta, Pekon
• [U-Boot] Question: booting Linux from ext4 mmc partition   nidalpres
• [U-Boot] Question: booting Linux from ext4 mmc partition   nidalpres
• [U-Boot] [PATCH] fs/ext4: fix partition size get truncated in calculation   Ma Haijun
• [U-Boot] Question: booting Linux from ext4 mmc partition   Robert Nelson
• [U-Boot] sandbox question   Simon Glass
• [U-Boot] [PATCH v5 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Scott Wood
• [U-Boot] [PATCH] fs/ext4: fix calling put_ext4 with truncated offset   Ma Haijun
• [U-Boot] Regression: SDP4430 - Fails to boot - bisect indicates i2c adaptation   Nishanth Menon
• [U-Boot] sandbox question   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: rmobile: Add SH QSPI base register address   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/4] arm: lager: Disable TMU0 before OS boots   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/4] arm: lager: Add support QSPI device and enable boot from SPI flash   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 3/4] arm: koelsch: Disable TMU0 before OS boots   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 4/4] arm: koelsch: Add support QSPI device and enable boot from SPI flash   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 0/3] Cleanup of boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v2 1/3] cosmetic: boards.cfg: remove a trailing empty line   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] [PATCH 3/3] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Minkyu Kang
• [U-Boot] [PATCH] omap4_common: config: remove I2C for SPL mode   Nishanth Menon
• [U-Boot] [PATCH] sh: delete redundant CONFIG_SH definition   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: delete redundant CONFIG_SH definition   Nobuhiro Iwamatsu
• [U-Boot] sandbox question   Abraham Varricatt
• [U-Boot] [PATCH v3 0/2] Add usb ethernet support for Arndale   Inderpal Singh
• [U-Boot] [PATCH v3 1/2] usb: ehci: exynos: set/reset hsic phys   Inderpal Singh
• [U-Boot] [PATCH v3 2/2] usb: exynos5: arndale: Add network support   Inderpal Singh
• [U-Boot] [PATCH 1/6] sh: sh2: Add CONFIG_SH2 definition to config.mk of SH2   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/6] sh: sh2: remove CONFIG_SH2 definition from board config   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6] sh: sh3: Add CONFIG_SH3 definition to config.mk of SH3   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/6] sh: sh3: remove CONFIG_SH3 definition from board config   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/6] sh: sh4: Add CONFIG_SH4 definition to config.mk of SH4   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] sh: sh4: remove CONFIG_SH4 definition from board config   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sf: params: Removed flag SECT_4K for Micron N25Q128   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] sh: sh2: Change CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] When will orphan boards removed?   Masahiro Yamada
• [U-Boot] [PATCH] omap4_common: config: remove I2C for SPL mode   Sricharan R
• [U-Boot] Regression: SDP4430 - Fails to boot - bisect indicates i2c adaptation   Lokesh Vutla
• [U-Boot] [PATCH 5/6] sh: sh4: Add CONFIG_SH4 definition to config.mk of SH4   Masahiro Yamada
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Christian Gmeiner
• [U-Boot] [PATCH 2/5] imx: mx6q_4x_mt41j128.cfg: enable ecspi3 clocks   Christian Gmeiner
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
• [U-Boot] [PATCH 4/5] imx6: add ot1200 mr board   Christian Gmeiner
• [U-Boot] [PATCH 5/5] imx6: make use of lldiv(..)   Christian Gmeiner
• [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm   Roger Quadros
• [U-Boot] [PATCH] net/fm: fix ft_fixup_xgec with checking enablement   Shengzhou Liu
• [U-Boot] [PATCH 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Stefano Babic
• [U-Boot] [PATCH v4 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/3] arm: make _end compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
• [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Armando Visconti
• [U-Boot] [PATCH v3 00/29] zynq: More boards support   Albert ARIBAUD
• [U-Boot] [PATCH v3 00/29] zynq: More boards support   Jagan Teki
• [U-Boot] [PATCH v4 00/29] zynq: More boards support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 01/29] zynq: Enable CONFIG_FIT_VERBOSE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 02/29] zynq: Enable Boot FreeBSD/vxWorks   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 03/29] zynq: Cleanup on miscellaneous configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 04/29] zynq: Cleanup on memory configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 05/29] zynq: Minor config cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 06/29] zynq: Enable cache options   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 07/29] zynq: Add UART0, UART1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 08/29] zynq: Add GEM0, GEM1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 09/29] zynq-common: Rename zynq with zynq-common   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 10/29] doc: zynq: Add information on zynq u-boot   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 11/29] zynq: Add zynq zc70x board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 12/29] zynq: Add zynq zed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 13/29] zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 14/29] zynq-common: Define exact TEXT_BASE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 15/29] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 16/29] zynq: Add zynq microzed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 17/29] zynq: Add zynq_zc770 xm010 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 18/29] zynq: Add zynq_zc770 xm013 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 20/29] zynq: Add support to find bootmode   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 21/29] zynq-common: Define default environment   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 22/29] zynq-common: Change Env. Sector size to 128Kb   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 23/29] zynq-common: Define flash env. partition   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 24/29] zynq-common: Define CONFIG_ENV_OVERWRITE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 25/29] dts: zynq: Add basic fdt support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 26/29] gpio: zynq: Add dummy gpio routines   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 27/29] zynq-common: Enable verified boot(RSA)   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 28/29] dts: zynq: Add more zynq dts files   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 29/29] doc: Update the zynq u-boot status   Jagannadha Sutradharudu Teki
• [U-Boot] sandbox question   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Jagan Teki
• [U-Boot] [PATCH] Add code for spi half duplex operation for enc28j60   Jagan Teki
• [U-Boot] [PATCH] Fix problems in chip select selection in imx23, 28 spi code   Jagan Teki
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Stefano Babic
• [U-Boot] [PATCH 2/5] imx: mx6q_4x_mt41j128.cfg: enable ecspi3 clocks   Stefano Babic
• [U-Boot] [U-Boot,PATCHv3,1/5] am43xx: Add qspi support   Jagan Teki
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Stefano Babic
• [U-Boot] [PATCH 5/5] imx6: make use of lldiv(..)   Stefano Babic
• [U-Boot] [PATCH v2 2/3] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Otavio Salvador
• [U-Boot] [PATCH] avr32: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] blackfin: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] x86: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] board: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] include: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] drivers: delete unused header files   Masahiro Yamada
• [U-Boot] [PATCH] board: delete unused header files   Stefan Roese
• [U-Boot] [PATCH 4/5] imx6: add ot1200 mr board   Stefano Babic
• [U-Boot] [PATCH] mmc: Delete unused driver ftsdc021_sdhci   Masahiro Yamada
• [U-Boot] [PATCH] board: delete unused header files   Matthias Fuchs
• [U-Boot] [PATCH 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Shawn Guo
• [U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Jagan Teki
• [U-Boot] [PATCH] spi: soft_spi: Support NULL din/dout buffers   Jagan Teki
• [U-Boot] [PATCH] cmd_sf: Mention in the help text that mode, addr, offset and len must be given in hex.   Jagan Teki
• [U-Boot] [PATCH v5 5/8] SPI: add Dove support to Kirkwood SPI driver   Jagan Teki
• [U-Boot] [PATCH] omap4_common: config: remove I2C for SPL mode   Tom Rini
• [U-Boot] [PATCH] omap4_common: config: remove I2C for SPL mode   Michael Trimarchi
• [U-Boot] [PATCH] arm: put .hash, .got.plt and .machine_param back in binaries   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOS   Tom Rini
• [U-Boot] TI:omap3: Drop omap3_zoom2   Tom Rini
• [U-Boot] ARM: tam3517-common: fix nand spl boot   Tom Rini
• [U-Boot] ARM: twister: add missing gpio clock init   Tom Rini
• [U-Boot] arm: omap: cm_t35: enable gpio bank 5 clocks explicitly   Tom Rini
• [U-Boot] [U-Boot, 1/1] ARM: dra7_evm: read mac address properly from e-fuse   Tom Rini
• [U-Boot] [PATCH 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Stefano Babic
• [U-Boot] [PATCH v3 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH] omap4_common: config: remove I2C for SPL mode   Nishanth Menon
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx6slevk: Include "mx6_common.h"   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Dirk Behme
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Fabio Estevam
• [U-Boot] [PATCH 2/5] imx: mx6q_4x_mt41j128.cfg: enable ecspi3 clocks   Christian Gmeiner
• [U-Boot] [PATCH 5/5] imx6: make use of lldiv(..)   Christian Gmeiner
• [U-Boot] [PATCH 4/5] imx6: add ot1200 mr board   Christian Gmeiner
• [U-Boot] When will orphan boards removed?   Tom Rini
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PATCH v4 09/29] zynq-common: Rename zynq with zynq-common   Albert ARIBAUD
• [U-Boot] [PATCH] include/mmc.h: Remove declaration for spl_mmc_load()   Pantelis Antoniou
• [U-Boot] [PATCH] x86: delete unused header files   Simon Glass
• [U-Boot] uboot post for arm   Simon Glass
• [U-Boot] MAKEALL   Simon Glass
• [U-Boot] Interrupts in U-Boot   Simon Glass
• [U-Boot] [PATCH v2] mmc/dwmmc: Using calloc instead malloc   Pantelis Antoniou
• [U-Boot] [PATCH] ARM: omap5_uevm: Enable 8-bit eMMC access   Pantelis Antoniou
• [U-Boot] [PATCH v4 00/29] zynq: More boards support   Albert ARIBAUD
• [U-Boot] [PATCH v4 00/29] zynq: More boards support   Jagan Teki
• [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support   Simon Glass
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Jagan Teki
• [U-Boot] [PATCH] powerpc/mpc85xx: Revise workaround for DDR A003474   York Sun
• [U-Boot] [Patch v2] powerpc/mpc85xx: Revise workaround for DDR-A003   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Revise workaround for DDR A003474   York Sun
• [U-Boot] [Patch v2] powerpc/mpc85xx: Revise workaround for DDR-A003   Gerhard Sittig
• [U-Boot] [Patch v2] powerpc/mpc85xx: Revise workaround for DDR-A003   York Sun
• [U-Boot] [PATCH v4 00/29] zynq: More boards support   Albert ARIBAUD
• [U-Boot] [PATCH v4 00/29] zynq: More boards support   Albert ARIBAUD
• [U-Boot] [PATCH v5 00/30] zynq: More boards support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 01/30] zynq: Enable CONFIG_FIT_VERBOSE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 02/30] zynq: Enable Boot FreeBSD/vxWorks   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 03/30] zynq: Cleanup on miscellaneous configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 04/30] zynq: Cleanup on memory configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 05/30] zynq: Minor config cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 06/30] zynq: Enable cache options   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 07/30] zynq: Add UART0, UART1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 08/30] zynq: Add GEM0, GEM1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 09/30] zynq-common: Rename zynq with zynq-common   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 10/30] doc: zynq: Add information on zynq u-boot   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 11/30] zynq: Add zynq zc70x board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 12/30] zynq: Add zynq zed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 13/30] zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 14/30] zynq-common: Define exact TEXT_BASE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 15/30] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 16/30] zynq: Add zynq microzed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 17/30] zynq: Add zynq_zc770 xm010 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 18/30] zynq: Add zynq_zc770 xm013 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 19/30] zynq: Add zynq_zc770 xm012 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 20/30] zynq: Add support to find bootmode   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 21/30] zynq-common: Define default environment   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 22/30] zynq-common: Change Env. Sector size to 128Kb   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 23/30] zynq-common: Define flash env. partition   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 24/30] zynq-common: Define CONFIG_ENV_OVERWRITE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 25/30] dts: zynq: Add basic fdt support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 26/30] gpio: zynq: Add dummy gpio routines   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 27/30] zynq-common: Enable verified boot(RSA)   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 28/30] dts: zynq: Add more zynq dts files   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 29/30] zynq: Enable CONFIG_DEFAULT_DEVICE_TREE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v5 30/30] doc: Update the zynq u-boot status   Jagannadha Sutradharudu Teki
• [U-Boot] [Patch v3] powerpc/mpc85xx: Revise workaround for DDR-A003   York Sun
• [U-Boot] Question: booting Linux from ext4 mmc partition   nidalpres
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH] mmc: Delete unused driver ftsdc021_sdhci   Kuo-Jung Su
• [U-Boot] Please pull u-boot-x86.git branch sandbox2   Simon Glass
• [U-Boot] [PATCH] mmc: Delete unused driver ftsdc021_sdhci   Masahiro Yamada
• [U-Boot] [PATCH] mmc: Delete unused driver ftsdc021_sdhci   Kuo-Jung Su
• [U-Boot] [PATCH 5/6] sh: sh4: Add CONFIG_SH4 definition to config.mk of SH4   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Hui.Liu at freescale.com
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh4: Remove CONFIG_SH4A definition from source code   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh2: Remove CONFIG_SH2A definition from asm/processor.h   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Shawn Guo
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Jagan Teki
• [U-Boot] [PATCH 2/5] imx: mx6q_4x_mt41j128.cfg: enable ecspi3 clocks   Christian Gmeiner
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
• [U-Boot] Problems with latest U-boot on Mini2440   Peter Germer
• [U-Boot] Are mmc open/close subcommands needed?   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc/dwmmc: use bounce buffer for data exchange between CPU and MMC controller   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: Minor cleanup of sdhci.c   Pantelis Antoniou
• [U-Boot] [PATCH V2] mmc: add setdsr support   Pantelis Antoniou
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA   Pantelis Antoniou
• [U-Boot] When will orphan boards removed?   Masahiro Yamada
• [U-Boot] [PATCH 2/5] imx: mx6q_4x_mt41j128.cfg: enable ecspi3 clocks   Stefano Babic
• [U-Boot] [PATCH 1/3 V2] esdhc: Workaround for card can't be detected on T4240QDS   Pantelis Antoniou
• [U-Boot] [PATCH 2/3 V2] esdhc: Detecting 8 bit width before mmc initialization   Pantelis Antoniou
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Stefano Babic
• [U-Boot] [PATCH 3/3 V2] eSDHC: Calculate envaddr accroding to the address format   Pantelis Antoniou
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Fabio Estevam
• [U-Boot] [PATCH v3] mx6slevk: Include "mx6_common.h"   Fabio Estevam
• [U-Boot] [PATCH 7/7 V5] powerpc/esdhc: Update esdhc command execution process   Pantelis Antoniou
• [U-Boot] [PATCH 2/7 V5] mmc: Get secure erase information from card   Pantelis Antoniou
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Stefano Babic
• [U-Boot] [PATCH v2 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core   Stefano Babic
• [U-Boot] [PATCH v3] mx6slevk: Include "mx6_common.h"   Stefano Babic
• [U-Boot] Pull request mmc tree   Pantelis Antoniou
• [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 01/12] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 02/12] trats2: Code cleanup.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v4 04/12] samsung: misc: move display logo function to misc.c file.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 05/12] common: lcd.c: fix data abort exception when try to access bmp header   Przemyslaw Marczak
• [U-Boot] [PATCH v4 06/12] lib: tizen: change Tizen logo with the new one.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 07/12] video: exynos: fimd: add support for various display color modes   Przemyslaw Marczak
• [U-Boot] [PATCH v4 08/12] samsung: boards: update display configs with 16bpp mode.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 10/12] Trats: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v4 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v4 12/12] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] Problems with latest U-boot on Mini2440   Gerhard Sittig
• [U-Boot] [PATCH v4 02/12] trats2: Code cleanup.   Jaehoon Chung
• [U-Boot] [PATCH v4 03/12] samsung: common: Add misc file and common function misc_init_r().   Jaehoon Chung
• [U-Boot] [PATCH 1/9] mmc: mmc header fix   Mateusz Zalega
• [U-Boot] [PATCH 2/9] part: header fix   Mateusz Zalega
• [U-Boot] [PATCH v3 3/9] arm:goni: Update configuration for goni target   Mateusz Zalega
• [U-Boot] [PATCH 4/9] arm:goni:dfu Add support for DFU to Goni target   Mateusz Zalega
• [U-Boot] [PATCH 5/9] arm:goni: enable GPT command   Mateusz Zalega
• [U-Boot] [PATCH 6/9] arm:goni: enable USB Mass Storage   Mateusz Zalega
• [U-Boot] [PATCH v3 7/9] dfu:mmc: raw data write fix   Mateusz Zalega
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] [PATCH 9/9] USB: gadget: added a saner gadget downloader registration API   Mateusz Zalega
• [U-Boot] [PATCH v5 00/30] zynq: More boards support   Jagan Teki
• [U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Chin Liang See
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [PATCH] watchdog/denali: Adding DesignWare watchdog driver support   Chin Liang See
• [U-Boot] [PATCH 1/2] socfpga: Adding Clock Manager driver   Chin Liang See
• [U-Boot] [PATCH 0/2 v2] socfpga: Adding Scan Manager   Chin Liang See
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Eric Nelson
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Stefano Babic
• [U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Jagan Teki
• [U-Boot] [PATCH v16 00/10] arm64 patch   Albert ARIBAUD
• [U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Chin Liang See
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Stephen Warren
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Otavio Salvador
• [U-Boot] omap4460 nand booting ?   Abraham Varricatt
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Otavio Salvador
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Otavio Salvador
• [U-Boot] [PATCH] armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases   Tom Rini
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Stefano Babic
• [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu.   Minkyu Kang
• [U-Boot] [PATCH] powerpc: ppc4xx: remove redandant CONFIG_4xx definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc5xxx: remove redandant CONFIG_MPC5xxx definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc83xx: remove redandant CONFIG_MPC83xx definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc8xx: remove redandant CONFIG_8xx definition   Masahiro Yamada
• [U-Boot] [PATCH v16 00/10] arm64 patch   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Po Liu
• [U-Boot] [PATCH v6 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL   Po Liu
• [U-Boot] [U-boot] Uboot's plan for ARMv8   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 1/3 V2] esdhc: Workaround for card can't be detected on T4240QDS   Zhang Haijun
• [U-Boot] [PATCH 2/7 V5] mmc: Get secure erase information from card   Zhang Haijun
• [U-Boot] [PATCH 7/7 V5] powerpc/esdhc: Update esdhc command execution process   Zhang Haijun
• [U-Boot] [PATCH 2/3 V2] esdhc: Detecting 8 bit width before mmc initialization   Zhang Haijun
• [U-Boot] [PATCH 1/9] mmc: mmc header fix   Jaehoon Chung
• [U-Boot] [U-boot] Uboot's plan for ARMv8   Abraham Varricatt
• [U-Boot] [PATCH 4/9] arm:goni:dfu Add support for DFU to Goni target   Jaehoon Chung
• [U-Boot] [PATCH v3 7/9] dfu:mmc: raw data write fix   Jaehoon Chung
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Jaehoon Chung
• [U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS   Haijun Zhang
• [U-Boot] [PATCH 2/3 V3] esdhc: Detecting 8 bit width before mmc initialization   Haijun Zhang
• [U-Boot] [PATCH 3/3 V3] eSDHC: Calculate envaddr accroding to the address format   Haijun Zhang
• [U-Boot] [U-boot] Uboot's plan for ARMv8   Wolfgang Denk
• [U-Boot] [U-boot] Uboot's plan for ARMv8   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH v4 0/37] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v4 01/37] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v4 02/37] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
• [U-Boot] [PATCH v4 03/37] tools: convert makefiles to kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v4 04/37] board: samsung: refactor host programs   Masahiro Yamada
• [U-Boot] [PATCH v4 05/37] examples: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v4 06/37] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v4 07/37] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v4 08/37] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 09/37] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 10/37] kbuild: import Kbuild.include from linux v3.12 tag   Masahiro Yamada
• [U-Boot] [PATCH v4 11/37] kbuild: Use Kbuild.include   Masahiro Yamada
• [U-Boot] [PATCH v4 12/37] Makefile: move more flags to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 13/37] Makefile: refactor include path settings   Masahiro Yamada
• [U-Boot] [PATCH v4 14/37] Makefile: move more stuff to top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 15/37] Makefile: move some flags to spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 16/37] Makefile: move some flags to examples makefiles   Masahiro Yamada
• [U-Boot] [PATCH v4 17/37] kbuild: change out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v4 18/37] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
• [U-Boot] [PATCH v4 19/37] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
• [U-Boot] [PATCH v4 20/37] kbuild: import more build scripts from Linux v3.12 tag   Masahiro Yamada
• [U-Boot] [PATCH v4 21/37] kbuild: use Linux Kernel build scripts   Masahiro Yamada
• [U-Boot] [PATCH v4 22/37] kbuild: delete temporary build scripts   Masahiro Yamada
• [U-Boot] [PATCH v4 23/37] kbuild: move some lines to more suitable place   Masahiro Yamada
• [U-Boot] [PATCH v4 24/37] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v4 25/37] kbuild: move include directives of board configuration files   Masahiro Yamada
• [U-Boot] [PATCH v4 26/37] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH v4 27/37] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
• [U-Boot] [PATCH v4 28/37] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
• [U-Boot] [PATCH v4 29/37] examples: move api/ and standalone/ to examples/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 30/37] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
• [U-Boot] [PATCH v4 31/37] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v4 32/37] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v4 33/37] kbuild: use scripts/Makefile.clean   Masahiro Yamada
• [U-Boot] [PATCH v4 34/37] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
• [U-Boot] [PATCH v4 35/37] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v4 36/37] board: sandburst: delete FORCEBUILD   Masahiro Yamada
• [U-Boot] [PATCH v4 37/37] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
• [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu.   Hyungwon Hwang
• [U-Boot] [U-boot] Uboot's plan for ARMv8   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu.   Hyungwon Hwang
• [U-Boot] [PATCH v4 06/12] lib: tizen: change Tizen logo with the new one.   Hyungwon Hwang
• [U-Boot] [U-boot] Uboot's plan for ARMv8   bhupesh.sharma at freescale.com
• [U-Boot] [U-boot] Uboot's plan for ARMv8   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH] spi: oc_tiny_spi: Refactor to simplify spi_xfer implementation   Axel Lin
• [U-Boot] [PATCH 9/9] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH v16 00/10] arm64 patch   Albert ARIBAUD
• [U-Boot] [PATCH v16 00/10] arm64 patch   Albert ARIBAUD
• [U-Boot] [PATCH] armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases   Albert ARIBAUD
• [U-Boot] [PATCH v4 06/12] lib: tizen: change Tizen logo with the new one.   Hyungwon Hwang
• [U-Boot] [PATCH] arm: make 'MAKEALL -a' distinguish between arm and aarch64   Albert ARIBAUD
• [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 06/12] lib: tizen: change Tizen logo with the new one.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu.   Minkyu Kang
• [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm: make 'MAKEALL -a' distinguish between arm and aarch64   Wolfgang Denk
• [U-Boot] [PATCH] arm: make 'MAKEALL -a' distinguish between arm and aarch64   Albert ARIBAUD
• [U-Boot] [U-Boot 1/3] spl: common: Properly ignore spl/Makefile in .gitignore   Dan Murphy
• [U-Boot] [U-Boot 2/3] spl: common: Move FAT funcs to a common file   Dan Murphy
• [U-Boot] [U-Boot 3/3] spl: common: Support for USB MSD FAT image loading   Dan Murphy
• [U-Boot] [PATCH] arm: make 'MAKEALL -a' distinguish between arm and aarch64   Gerhard Sittig
• [U-Boot] [PATCH] arm: make 'MAKEALL -a' distinguish between arm and aarch64   Albert ARIBAUD
• [U-Boot] [U-boot] Uboot's plan for ARMv8   Tom Rini
• [U-Boot] [PATCH v4 32/37] Makefile: refactor tools-all targets   Gerhard Sittig
• [U-Boot] [PATCH v5 00/12] Introduce Samsung misc file and LCD menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 01/12] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 02/12] trats2: Code cleanup.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 05/12] common: lcd.c: fix data abort exception when try to access bmp header   Przemyslaw Marczak
• [U-Boot] [PATCH v5 06/12] lib: tizen: change Tizen logo with the new one.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 07/12] video: exynos: fimd: add support for various display color modes   Przemyslaw Marczak
• [U-Boot] [PATCH v5 08/12] samsung: boards: update display configs with 16bpp mode.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 09/12] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 10/12] Trats: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v5 11/12] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v5 12/12] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v5 00/30] zynq: More boards support   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] net: execute "miiphy_init" if CONFIG_PHYLIB defined   Alexey Brodkin
• [U-Boot] [PATCH v3] spi/cadence: Adding Cadence SPI driver support for SOCFPGA   Chin Liang See
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Scott Wood
• [U-Boot] Please pull u-boot-x86.git branch sandbox2   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] Pull request mmc tree   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] net: execute "miiphy_init" if CONFIG_PHYLIB defined   Joe Hershberger
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Eric Nelson
• [U-Boot] omap4460 nand booting ?   Gupta, Pekon
• [U-Boot] omap4460 nand booting ?   Abraham Varricatt
• [U-Boot] omap4460 nand booting ?   Michael Trimarchi
• [U-Boot] how to get u-boot code with arm64: core support   FengHua
• [U-Boot] how to get u-boot code with arm64: core support   Jagan Teki
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: exynos: add missing readl   Inha Song
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH] arm: exynos: add missing readl   Wolfgang Denk
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Nikita Kiryanov
• [U-Boot] [PATCH v7 00/17] sf: Add support for quad and dual_flash   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 01/17] sf: Add extended read commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 02/17] sf: Add quad read/write commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 03/17] sf: ops: Add configuration register writing support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 04/17] sf: Set quad enable bit support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 05/17] sf: probe: Enable RD_FULL and WR_QPP   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 06/17] sf: Separate the flash params table   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 07/17] sf: Add QUAD_IO_FAST read support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 08/17] sf: Discover read dummy_byte   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 09/17] sf: Add macronix set QEB support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 10/17] sf: probe: Enable macronix quad read/write cmds support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 11/17] sf: Divide flash register ops from QEB code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 12/17] sf: Code cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 13/17] sf: ops: Unify read_ops bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 14/17] sf: Add dual memories support - DUAL_STACKED   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 15/17] sf: Add dual memories support - DUAL_PARALLEL   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 16/17] sf: Add CONFIG_SF_DUAL_FLASH   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v7 17/17] doc: SPI: Update status.txt   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Anatolij Gustschin
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v2 0/2] video: ipu reg: Correct some reserved array sizes   Anatolij Gustschin
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Fabio Estevam
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] t2080qds/ddr: update ddr parameters   Shengzhou Liu
• [U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610   Alison Wang
• [U-Boot] [PATCH 1/3] arm: imx: Add two macros for VF610 in IOMUX_PAD structure   Alison Wang
• [U-Boot] [PATCH 2/3] arm: vf610: Add QSPI support for VF610TWR   Alison Wang
• [U-Boot] [PATCH 3/3] arm: vf610: Add QSPI driver support   Alison Wang
• [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Wolfgang Denk
• [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Prabhakar Kushwaha
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610   Jagan Teki
• [U-Boot] [PATCH 9/9] USB: gadget: added a saner gadget downloader registration API   Heiko Schocher
• [U-Boot] [PATCH] net/fm: revert commit 732dfe090d50af53bb682d0c8971784f8de1f90f   Shengzhou Liu
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Heiko Schocher
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Michal Simek
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Heiko Schocher
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Michal Simek
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Gupta, Pekon
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Albert ARIBAUD
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: merge commonly-defined PLATFORM_RELFLAGS   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] ARM: versatile: pass console setting to the kernel   Albert ARIBAUD
• [U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610   Huan Wang
• [U-Boot] 2014.01: two ARM boards left with CONFIG_SYS_HZ warning   Albert ARIBAUD
• [U-Boot] Quickstart-Manual for u-boot?   Fred Fisch
• [U-Boot] [PATCH] arm: New stack pointer is already aligned   Albert ARIBAUD
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Przemyslaw Marczak
• [U-Boot] [PATCH v2] net/designware: make driver compatible with data cache   Alexey Brodkin
• [U-Boot] [PATCH v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.   Przemyslaw Marczak
• [U-Boot] [PATCH] net/designware: add explicit reset of {tx|rx}_currdescnum   Alexey Brodkin
• [U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610   Jagan Teki
• [U-Boot] [PATCH v7 01/17] sf: Add extended read commands support   Gerhard Sittig
• [U-Boot] [PATCH v7 00/17] sf: Add support for quad and dual_flash   Gerhard Sittig
• [U-Boot] BCH8 support when we do not have ELM h/w engine.   Gupta, Pekon
• [U-Boot] Quickstart-Manual for u-boot?   Robert P. J. Day
• [U-Boot] [PATCH 9/9] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Lukasz Majewski
• [U-Boot] [PATCH REPOST3 1/2] ARM: rpi_b: power on SDHCI and USB HW modules   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Stefano Babic
• [U-Boot] [PATCH v3] mx6slevk: Include "mx6_common.h"   Stefano Babic
• [U-Boot] [PATCH v7 01/17] sf: Add extended read commands support   Jagan Teki
• [U-Boot] [PATCH v2 1/6] wandboard: Return from cpu_eth_init() directly   Stefano Babic
• [U-Boot] [PATCH 5/5] imx6: make use of lldiv(..)   Stefano Babic
• [U-Boot] [PATCH v5 1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Stefano Babic
• [U-Boot] [PATCH 1/2] ext4fs: use EXT2_BLOCK_SIZE instead of fs->blksz   Ionut Nicu
• [U-Boot] [PATCH v5 3/3] wandboard: Set default environment to use zImage   Stefano Babic
• [U-Boot] [PATCH 2/2] ext4fs: fix "invalid extent block" error   Ionut Nicu
• [U-Boot] [PATCH v7 00/17] sf: Add support for quad and dual_flash   Jagan Teki
• [U-Boot] [PATCH v5 2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board   Stefano Babic
• [U-Boot] [PATCH] net/designware - switch driver to phylib usage   Alexey Brodkin
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Stefano Babic
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Marek Vasut
• [U-Boot] [PATCH v3 0/2] Add usb ethernet support for Arndale   Marek Vasut
• [U-Boot] [PATCH v15 07/10] arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH] net/designware - switch driver to phylib usage   Alexey Brodkin
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa/master   Marek Vasut
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Calvin Johnson
• [U-Boot] [PATCH v7 01/17] sf: Add extended read commands support   Jagan Teki
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Artem Bityutskiy
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Gupta, Pekon
• [U-Boot] [PULL] u-boot-pxa/master   Albert ARIBAUD
• [U-Boot] Prefetch abort exception   Parimala Baggiri
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Przemyslaw Marczak
• [U-Boot] [PATCH v3 7/9] dfu:mmc: raw data write fix   Mateusz Zalega
• [U-Boot] [PATCH] arm: New stack pointer is already aligned   Tom Rini
• [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Wolfgang Denk
• [U-Boot] [U-Boot 3/3] spl: common: Support for USB MSD FAT image loading   Dan Murphy
• [U-Boot] [PATCH v3] arm: put .hash, .got.plt and .machine_param back in binaries   Albert ARIBAUD
• [U-Boot] [PATCH] usb: ums: wait for usb cable connection before enter ums mode   Marek Vasut
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Chin Liang See
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Michael Trimarchi
• [U-Boot] [PATCH 4/9] arm:goni:dfu Add support for DFU to Goni target   Mateusz Zalega
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Artem Bityutskiy
• [U-Boot] [PATCH 0/9] Further support for the kmp204x architecture   Valentin Longchamp
• [U-Boot] [PATCH 1/9] kmp204x: support for QRIO1 bootcounter   Valentin Longchamp
• [U-Boot] [PATCH 2/9] kmp204x: introduce QRIO GPIO functions   Valentin Longchamp
• [U-Boot] [PATCH 3/9] kmp204x: I2C deblocking for I2C-bus1 added   Valentin Longchamp
• [U-Boot] [PATCH 4/9] kmp204x: implement workaround for A-006559   Valentin Longchamp
• [U-Boot] [PATCH 5/9] kmp204x: add support for the kmcoge4 board   Valentin Longchamp
• [U-Boot] [PATCH 6/9] kmp204x: update I2C field of RCW   Valentin Longchamp
• [U-Boot] [PATCH 7/9] KM: add the KM_UBI_PART_BOOT_OPTS #define   Valentin Longchamp
• [U-Boot] [PATCH 8/9] kmp204x: enable support for SPANSION SPI NOR   Valentin Longchamp
• [U-Boot] [PATCH 9/9] kmp204x: initial support for PCIe FPGA configuration   Valentin Longchamp
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa/master   Albert ARIBAUD
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Chin Liang See
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Scott Wood
• [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   Scott Wood
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] sf: params: Removed flag SECT_4K for Micron N25Q128   Jagan Teki
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [ANN] v2014.01-rc3   Tom Rini
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Fabio Estevam
• [U-Boot] [PATCH 1/2] mini2440: remove board support   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] mx1ads: remove board support   Albert ARIBAUD
• [U-Boot] Bug in TOP860 code with gcc 4.8.1   Wolfgang Denk
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Wolfgang Denk
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Wolfgang Denk
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Dinh Nguyen
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Albert ARIBAUD
• [U-Boot] [ANN] v2014.01-rc3   Stefano Babic
• [U-Boot] [PATCH 2/2] mx1ads: remove board support   Stefano Babic
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Chin Liang See
• [U-Boot] [OT] CC:s in commits (was: [PATCH 1/2] socfpga: Adding Scan Manager driver)   Chin Liang See
• [U-Boot] [ANN] v2014.01-rc3   Lukasz Majewski
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.   Minkyu Kang
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Fabio Estevam
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Minkyu Kang
• [U-Boot] [PATCH 1/2] mini2440: remove board support   Minkyu Kang
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Scott Wood
• [U-Boot] [PATCH] .gitignore: ignore u-boot.elf and tools/relocate-rela   Masahiro Yamada
• [U-Boot] [PATCH v15 07/10] arm64: core support   FengHua
• [U-Boot] [PATCH] board: tec-ng: Do not make directories in a board Makefile   Masahiro Yamada
• [U-Boot] XHCI Issues   Aaron Williams
• [U-Boot] [PATCH REPOST4 1/2] ARM: rpi_b: power on SDHCI and USB HW modules   Stephen Warren
• [U-Boot] [PATCH REPOST4 2/2] ARM: bcm2835: fix mailbox timeout   Stephen Warren
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Eric Nelson
• [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file.   Jaehoon Chung
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH] arm: exynos: change to use clrbits macro instead of readl/writel function   Inha Song
• [U-Boot] [PATCH] arm: exynos: change to use clrbits macro instead of readl/writel function   Jaehoon Chung
• [U-Boot] XHCI Issues   Aaron Williams
• [U-Boot] Prefetch abort exception   Albert ARIBAUD
• [U-Boot] [PATCH] powerpc/mpc85xx:Increase binary size for P, B & T series boards.   Prabhakar Kushwaha
• [U-Boot] fdt performance   Aaron Williams
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Jagan Teki
• [U-Boot] [PATCH 1/9] kmp204x: support for QRIO1 bootcounter   Stefan Roese
• [U-Boot] [PATCH 0/3] fix: Trats/Trats2 default envs adjustement for 2014.01 release   Lukasz Majewski
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Lukasz Majewski
• [U-Boot] [PATCH 2/3] ARM: trats2: dfu: Enable default Poll Timeout for Trats2 board   Lukasz Majewski
• [U-Boot] [PATCH 3/3] config: Update envs for trats and trats2 - Disable L2 cache   Lukasz Majewski
• [U-Boot] [PATCH] board:universal: fix i2c adapter   Piotr Wilczek
• [U-Boot] [PATCH REPOST4 1/2] ARM: rpi_b: power on SDHCI and USB HW modules   Albert ARIBAUD
• [U-Boot] [PATCH v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.   Przemyslaw Marczak
• [U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode   Christian Gmeiner
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
• [U-Boot] [PATCH 0/7] arm: add runtime envs describing build configuration   Piotr Wilczek
• [U-Boot] [PATCH 1/7] arm:exynos: add cpu revision   Piotr Wilczek
• [U-Boot] [PATCH 2/7] arm:s5pc110: add cpu revision   Piotr Wilczek
• [U-Boot] [PATCH 3/7] board:samsung:common: set envs with board unified information   Piotr Wilczek
• [U-Boot] [PATCH 4/7] board:samsung:goni: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH 6/7] board:samsung:trats: enable boot with appended and separated DTB   Piotr Wilczek
• [U-Boot] [PATCH 7/7] board:samsung:trats2: enable boot with appended and separated DTB   Piotr Wilczek
• [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file.   Przemyslaw Marczak
• [U-Boot] [PATCH 2/2] mx1ads: remove board support   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] mini2440: remove board support   Albert ARIBAUD
• [U-Boot] [PATCH] board:universal: fix i2c adapter   Przemyslaw Marczak
• [U-Boot] [PATCH v2] powerpc: ppc4xx: remove redundant CONFIG_4xx definition   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc: mpc83xx: remove redundant CONFIG_MPC83xx definition   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc: mpc8xx: remove redundant CONFIG_8xx definition   Masahiro Yamada
• [U-Boot] [PATCH 1/9] kmp204x: support for QRIO1 bootcounter   Valentin Longchamp
• [U-Boot] [PATCH] net/bootp: add CONFIG_BOOTP_BOOTFILE   Christian Gmeiner
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Przemyslaw Marczak
• [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file.   Minkyu Kang
• [U-Boot] [PATCH] mmc: dwmmc: mode change to 0644   Minkyu Kang
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: exynos: change to use clrbits macro instead of readl/writel function   Przemyslaw Marczak
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Minkyu Kang
• [U-Boot] [PATCH 2/3] ARM: trats2: dfu: Enable default Poll Timeout for Trats2 board   Minkyu Kang
• [U-Boot] [PATCH 3/3] config: Update envs for trats and trats2 - Disable L2 cache   Minkyu Kang
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Przemyslaw Marczak
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Detlev Zundel
• [U-Boot] [PATCH] board: tec-ng: Do not make directories in a board Makefile   Alban Bedel
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH v3] arm: put .hash, .got.plt and .machine_param back in binaries   Albert ARIBAUD
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] [PATCH 8/9] ums: always initialize mmc before ums_disk_init()   Mateusz Zalega
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] Compiling fw_printenv tool   Alexey Smishlayev
• [U-Boot] Bug in TOP860 code with gcc 4.8.1   Reinhard Meyer
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: use canonical sub mnemonic   Albert ARIBAUD
• [U-Boot] Compiling fw_printenv tool   Masahiro Yamada
• [U-Boot] [PATCH] mx6: Distinguish mx6dual from mx6quad   Fabio Estevam
• [U-Boot] [PATCH v1 0/24] Zynq DT changes   Albert ARIBAUD
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH v1 0/24] Zynq DT changes   Michal Simek
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [ANN] v2014.01-rc3   Tom Rini
• [U-Boot] [PATCH 5/7] board:samsung:universal: add env variables describing platform   Przemyslaw Marczak
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/3] net: phy: atheros: Fix the masks for AR8031/8035   Fabio Estevam
• [U-Boot] BCH8 support when we do not have ELM h/w engine.   Enric Balletbo Serra
• [U-Boot] Sparkasse Alert: Ihre Internet-Banking-Konto vorübergehend gesperrt   Erste Bank und Sparkasse
• [U-Boot] 新年大促：仅29元，最新114届 2013秋季广交会买家，历年数据，B2B询盘买家、thomasnet 采购商,海关数据,群发软件，展会买家 !   淘宝交易
• [U-Boot] [PATCH] DRA7: Add support for ES1.1 silicon ID code   Nishanth Menon
• [U-Boot] Bug in TOP860 code with gcc 4.8.1   Jeroen Hofstee
• [U-Boot] [PATCH] DRA7: add ABB setup for MPU voltage domain   Nishanth Menon
• [U-Boot] [PATCH v2 3/3] net: phy: atheros: Fix the masks for AR8031/8035   Joe Hershberger
• [U-Boot] [PATCH] DRA7: add ABB setup for MPU voltage domain   Tom Rini
• [U-Boot] [PATCH v2 3/3] net: phy: atheros: Fix the masks for AR8031/8035   Stefano Babic
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] how to get u-boot code with arm64: core support   Scott Wood
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Scott Wood
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Scott Wood
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH] mmc: dwmmc: mode change to 0644   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] common, env: optimize boottime   Tom Rini
• [U-Boot] board: nios2: Add CONFIG_CFI_FLASH_MTD guard to flash.h header include   Tom Rini
• [U-Boot] [U-Boot, v2] bootm: Reinstate special case for standalone images   Tom Rini
• [U-Boot] common/image.c: move VxWorks header string out of CONFIG_CMD_ELF   Tom Rini
• [U-Boot] command.c: Fix auto-completion for the full commands list case   Tom Rini
• [U-Boot] [U-Boot, v2] fuelgauge: max17042: fix i2c read issue which causes infinity loop.   Tom Rini
• [U-Boot] lzma: fix buffer bound check error   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Scott Wood
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Scott Wood
• [U-Boot] mxc_i2c driver   York Sun
• [U-Boot] mxc_i2c driver   Troy Kisky
• [U-Boot] mxc_i2c driver   York Sun
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] powerpc: mpc512x: remove redundant CONFIG_MPC512X definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc5xx: remove redundant CONFIG_5xx definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc824x: remove redundant CONFIG_MPC824X definition   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk   Masahiro Yamada
• [U-Boot] [ANN] v2014.01-rc3   Minkyu Kang
• [U-Boot] A list of dead email addresses of board maintainers   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: merge commonly-defined PLATFORM_RELFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] ARM: merge commonly-defined PLATFORM_RELFLAGS   Masahiro Yamada
• [U-Boot] [PATCH v4 32/37] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Gupta, Pekon
• [U-Boot] [PATCH] sandbox: fix the return type of os_free() function   Masahiro Yamada
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Jagan Teki
• [U-Boot] [PATCH v3 1/2] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Masahiro Yamada
• [U-Boot] [PATCH v3 2/2] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] how to get u-boot code with arm64: core support   FengHua
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Inha Song
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Jaehoon Chung
• [U-Boot] [PATCH] nand: fix reading after switching ecc   Gupta, Pekon
• [U-Boot] [PATCH] net/bootp: add CONFIG_BOOTP_BOOTFILE   Wolfgang Denk
• [U-Boot] how to get u-boot code with arm64: core support   Wolfgang Denk
• [U-Boot] [PATCH] spi: sh_qspi: Add header file that defines the address of registers   Nobuhiro Iwamatsu
• [U-Boot] [ANN] v2014.01-rc3   Przemyslaw Marczak
• [U-Boot] XHCI Issues   Aaron Williams
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Minkyu Kang
• [U-Boot] [PATCH 0/2] PPC: MPC82xx removal   Wolfgang Denk
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Wolfgang Denk
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] Pull request: u-boot-mpc82xx / master   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Holger Brunck
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Piotr Wilczek
• [U-Boot] [PATCH] arm64 patch: gicv3 support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Masahiro Yamada
• [U-Boot] [PATCH] board: delete meaningless serial.h   Masahiro Yamada
• [U-Boot] Bug in TOP860 code with gcc 4.8.1   Reinhard Meyer
• [U-Boot] sf: Discussion on quad changes   Jagan Teki
• [U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()   Stefano Babic
• [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file.   Przemyslaw Marczak
• [U-Boot] [PATCH] board: delete meaningless serial.h   Stefan Roese
• [U-Boot] [PATCH 1/2] env_mmc: make board configurable the partition for the environment   Hector Palacios
• [U-Boot] [PATCH 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Hector Palacios
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Wolfgang Denk
• [U-Boot] [PATCH 1/2] env_mmc: make board configurable the partition for the environment   Otavio Salvador
• [U-Boot] [PATCH 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Otavio Salvador
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Wolfgang Denk
• [U-Boot] Fat write problem   Ruud Commandeur
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] how to get u-boot code with arm64: core support   Abraham Varricatt
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   thomas.langer at lantiq.com
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Holger Brunck
• [U-Boot] how to get u-boot code with arm64: core support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Wolfgang Denk
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Tom Rini
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   thomas.langer at lantiq.com
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Pantelis Antoniou
• [U-Boot] [PATCH] sf: Squash the malloc+memset combo   Marek Vasut
• [U-Boot] [PATCH] arm64 patch: gicv3 support   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH] sf: Fix entries for S25FL256S_256K and S25FL512S_256K   Marek Vasut
• [U-Boot] [PATCH] sf: Add S25FL128S_256K IDs   Marek Vasut
• [U-Boot] [PATCH] sf: Fix entries for S25FL256S_256K and S25FL512S_256K   Marek Vasut
• [U-Boot] Compiling fw_printenv tool   Gerhard Sittig
• [U-Boot] [PATCH v4 32/37] Makefile: refactor tools-all targets   Gerhard Sittig
• [U-Boot] [PATCH] ARM: tegra20: Add a missing entry in the pullid enum   Alban Bedel
• [U-Boot] [PATCH] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v7 01/17] sf: Add extended read commands support   Gerhard Sittig
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] sf: Fix entries for S25FL256S_256K and S25FL512S_256K   Jagan Teki
• [U-Boot] [PATCH] designware_i2c: Enhance DesignWare I2C driver address support   Alexey Brodkin
• [U-Boot] [PATCH] drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW   Alexey Brodkin
• [U-Boot] [PATCH] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
• [U-Boot] [PATCH] sf: Fix entries for S25FL256S_256K and S25FL512S_256K   Marek Vasut
• [U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
• [U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support   Alexey Brodkin
• [U-Boot] [PATCH] i.MX6DQ/DLS: rename and fix pad MX6_PAD_RGMII_TX_CTL__ENET_REF_CLK   Hector Palacios
• [U-Boot] [PATCH] sf: Add S25FL128S_256K IDs   Jagan Teki
• [U-Boot] [PATCH] arm: exynos: change to use clrbits macro instead of readl/writel function   Gerhard Sittig
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Gerhard Sittig
• [U-Boot] [PATCH 3/7] board:samsung:common: set envs with board unified information   Gerhard Sittig
• [U-Boot] [PATCH v2] powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition   Gerhard Sittig
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Gerhard Sittig
• [U-Boot] [PATCH 1/2] env_mmc: make board configurable the partition for the environment   Hector Palacios
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Simon Glass
• [U-Boot] [PATCH v2] nand, gpmc: fix reading after switching ecc   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Holger Brunck
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Otavio Salvador
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Stefano Babic
• [U-Boot] [PATCH 1/2] env_mmc: make board configurable the partition for the environment   Stephen Warren
• [U-Boot] [PATCH 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Stephen Warren
• [U-Boot] sf: Discussion on quad changes   Simon Glass
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH] ARM: tegra20: Add a missing entry in the pullid enum   Stephen Warren
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Lukasz Majewski
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Dan Malek
• [U-Boot] Pull request v2: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Jesse Larrew
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Masahiro Yamada
• [U-Boot] [PATCH] arm64 patch: gicv3 support   FengHua
• [U-Boot] [PATCH v3] powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: uImage.FIT: fix documents   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition   Masahiro Yamada
• [U-Boot] [PATCH 2/2] PPC: remove support for MPC82xx processors   Scott Wood
• [U-Boot] [PATCH] arm64 patch: gicv3 support   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH V4 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
• [U-Boot] [PATCH V4 6/6] config: SMDK5420: Enable S2MPS11 pmic   Leela Krishna Amudala
• [U-Boot] [PATCH V4 5/6] exynos: Add a common DT based PMIC driver initialization   Minkyu Kang
• [U-Boot] [PATCH V4 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs, use TAB for indentation   Wolfgang Denk
• [U-Boot] [PATCH 1/2] serial: opencores_yanu: Fix build error   Axel Lin
• [U-Boot] [PATCH 2/2] serial: opencores_yanu: Avoid duplicate oc_serial_setbrg() implementation   Axel Lin
• [U-Boot] [PATCH 3/7] board:samsung:common: set envs with board unified information   Piotr Wilczek
• [U-Boot] [PATCH] DRA7: Add support for ES1.1 silicon ID code   Sricharan R
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Artem Bityutskiy
• [U-Boot] [PATCH] arm64 patch: gicv3 support   FengHua
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Minkyu Kang
• [U-Boot] Pull request: u-boot-arm/master - please hold   Albert ARIBAUD
• [U-Boot] [PATCH] arm: exynos: change to use clrbits macro instead of readl/writel function   Minkyu Kang
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Inha Song
• [U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot   Artem Bityutskiy
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Jaehoon Chung
• [U-Boot] [PATCH v9 0/7] arm: add Faraday SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v9 1/7] arm: add Faraday ARMv5TE cores support   Kuo-Jung Su
• [U-Boot] [PATCH v9 2/7] arm: add Faraday SoC helper files   Kuo-Jung Su
• [U-Boot] [PATCH v9 3/7] arm: faraday: add FTTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v9 4/7] arm: faraday: add FTPWMTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v9 5/7] arm: faraday: ftsmc020: add a fail-safe macro constant   Kuo-Jung Su
• [U-Boot] [PATCH v9 6/7] arm: faraday: add A369 evaluation board support   Kuo-Jung Su
• [U-Boot] [PATCH v9 7/7] arm: faraday: add Faraday Virtual Machine support   Kuo-Jung Su
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Minkyu Kang
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Pierre Aubert
• [U-Boot] [PATCH V5 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420   Leela Krishna Amudala
• [U-Boot] [PATCH V5 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
• [U-Boot] [PATCH V5 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
• [U-Boot] [PATCH V5 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Leela Krishna Amudala
• [U-Boot] [PATCH V5 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Leela Krishna Amudala
• [U-Boot] [PATCH V5 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
• [U-Boot] [PATCH V5 6/6] config: SMDK5420: Enable S2MPS11 pmic   Leela Krishna Amudala
• [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function   Jaehoon Chung
• [U-Boot] Pull request v2: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master - UPDATED   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator   Pierre AUBERT
• [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
• [U-Boot] Prefetch abort exception   Parimala Baggiri
• [U-Boot] Boot Linux kernel with initramfs fails   Jean-baptiste DURONEA
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Fabio Estevam
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Stefano Babic
• [U-Boot] Prefetch abort exception   Albert ARIBAUD
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Fabio Estevam
• [U-Boot] [PATCH] sf: Fix entries for S25FL256S_256K and S25FL512S_256K   Jagan Teki
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Otavio Salvador
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Fabio Estevam
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Fabio Estevam
• [U-Boot] [PATCH] vexpress/armv8: Fix incorrect ethernet controller   Bhupesh Sharma
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Otavio Salvador
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Fabio Estevam
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Otavio Salvador
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Stefano Babic
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Gerhard Sittig
• [U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"   Pierre AUBERT
• [U-Boot] [uBoot] [Patch v2 1/4] spl: common: Properly ignore spl/Makefile in .gitignore   Dan Murphy
• [U-Boot] [uBoot] [Patch v2 2/4] spl: common: Move FAT funcs to a common file   Dan Murphy
• [U-Boot] [uBoot] [Patch v2 3/4] spl: common: Support for USB MSD FAT image loading   Dan Murphy
• [U-Boot] [uBoot] [Patch v2 4/4] arm: am43xx: Add USB spl boot support   Dan Murphy
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Hector Palacios
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] [ANN] v2014.01-rc3   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/6] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Stephen Warren
• [U-Boot] [PATCH 2/6] add a generic set of configs to enable Distros to more easier support u-boot based systems   Stephen Warren
• [U-Boot] [PATCH 2/6] add a generic set of configs to enable Distros to more easier support u-boot based systems   Stephen Warren
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Albert ARIBAUD
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH 2/6] add a generic set of configs to enable Distros to more easier support u-boot based systems   Stephen Warren
• [U-Boot] imx6 Solo and LAN8720   Andy Ng
• [U-Boot] [PATCH] mx6: Distinguish mx6dual from mx6quad   Otavio Salvador
• [U-Boot] [PATCH 1/5] fs: fix generic save command implementation   Stephen Warren
• [U-Boot] [PATCH 2/5] fs: implement infra-structure for an 'exists' function   Stephen Warren
• [U-Boot] [PATCH 3/5] sandbox: implement fs_exists() and 'sb exists' shell function   Stephen Warren
• [U-Boot] [PATCH 4/5] ext4: implement exists for ext4fs   Stephen Warren
• [U-Boot] [PATCH 5/5] ext4: implement exists for ext4fs   Stephen Warren
• [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Otavio Salvador
• [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 02/11] hummingboard: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 03/11] mx23evk: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 04/11] mx28evk: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 05/11] mx51evk: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 06/11] mx53loco: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 07/11] mx6qarm2: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 08/11] mx6sabre_common: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 09/11] mx6slevk: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 10/11] udoo: Set default environment to use zImage   Otavio Salvador
• [U-Boot] [PATCH 11/11] vf610twr: Set default environment to use zImage   Otavio Salvador
• [U-Boot] imx6 Solo and LAN8720   Andy Ng
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Wolfgang Denk
• [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Wolfgang Denk
• [U-Boot] [PATCH RFC 1/4] config: remove distro_default from common.h   Stephen Warren
• [U-Boot] [PATCH RFC 2/4] ARM: tegra: convert tegra to use distro defaults   Stephen Warren
• [U-Boot] [PATCH RFC 3/4] ARM: tegra: rework boot scripts   Stephen Warren
• [U-Boot] [PATCH RFC 4/4] pxe: implement fdtdir extlinux.conf tag   Stephen Warren
• [U-Boot] imx6 Solo and LAN8720   Fabio Estevam
• [U-Boot] imx6 Solo and LAN8720   Andy Ng
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH 5/5] ext4: implement exists for ext4fs   Stefan Roese
• [U-Boot] Boot Linux kernel with initramfs fails   Wolfgang Denk
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Minkyu Kang
• [U-Boot] [PATCH] drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW   Heiko Schocher
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Heiko Schocher
• [U-Boot] imx6 Solo and LAN8720   Pierre Aubert
• [U-Boot] [PATCH] drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW   Alexey Brodkin
• [U-Boot] U-boot memory test results   aryanlak
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/2] env_mmc: make board configurable the partition for the environment   Hector Palacios
• [U-Boot] [PATCH v2 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Hector Palacios
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] Fwd: Re: Boot Linux kernel with initramfs fails   Jean-baptiste DURONEA
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] [PATCH 0/3] fix: Trats/Trats2 default envs adjustement for 2014.01 release   Lukasz Majewski
• [U-Boot] [PATCH v2 1/2] env_mmc: make board configurable the partition for the environment   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Otavio Salvador
• [U-Boot] Fwd: Re: Boot Linux kernel with initramfs fails   Wolfgang Denk
• [U-Boot] [PATCH v5 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v5 01/38] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v5 02/38] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
• [U-Boot] [PATCH v5 03/38] tools: convert makefiles to kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v5 04/38] board: samsung: refactor host programs   Masahiro Yamada
• [U-Boot] [PATCH v5 05/38] examples: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v5 06/38] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v5 07/38] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v5 08/38] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 09/38] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 10/38] kbuild: import Kbuild.include from linux v3.12 tag   Masahiro Yamada
• [U-Boot] [PATCH v5 11/38] kbuild: Use Kbuild.include   Masahiro Yamada
• [U-Boot] [PATCH v5 12/38] Makefile: move more flags to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 13/38] Makefile: refactor include path settings   Masahiro Yamada
• [U-Boot] [PATCH v5 14/38] Makefile: move more stuff to top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 15/38] Makefile: move some flags to spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 16/38] Makefile: move some flags to examples makefiles   Masahiro Yamada
• [U-Boot] [PATCH v5 17/38] kbuild: change out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v5 18/38] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
• [U-Boot] [PATCH v5 19/38] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
• [U-Boot] [PATCH v5 20/38] kbuild: import more build scripts from Linux v3.12 tag   Masahiro Yamada
• [U-Boot] [PATCH v5 21/38] kbuild: use Linux Kernel build scripts   Masahiro Yamada
• [U-Boot] [PATCH v5 22/38] kbuild: delete temporary build scripts   Masahiro Yamada
• [U-Boot] [PATCH v5 23/38] kbuild: move some lines to more suitable place   Masahiro Yamada
• [U-Boot] [PATCH v5 24/38] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v5 25/38] kbuild: move include directives of board configuration files   Masahiro Yamada
• [U-Boot] [PATCH v5 26/38] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH v5 27/38] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
• [U-Boot] [PATCH v5 28/38] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
• [U-Boot] [PATCH v5 29/38] examples: move api/ and standalone/ to examples/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 30/38] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
• [U-Boot] [PATCH v5 31/38] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v5 32/38] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v5 33/38] kbuild: use scripts/Makefile.clean   Masahiro Yamada
• [U-Boot] [PATCH v5 34/38] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
• [U-Boot] [PATCH v5 35/38] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v5 36/38] board: sandburst: delete FORCEBUILD   Masahiro Yamada
• [U-Boot] [PATCH v5 37/38] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
• [U-Boot] [PATCH v5 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
• [U-Boot] Fwd: Re: Boot Linux kernel with initramfs fails   Jean-baptiste DURONEA
• [U-Boot] imx6 Solo and LAN8720   Andy Ng
• [U-Boot] U-boot memory test results   Heiko Schocher
• [U-Boot] [PATCH] board_r - fixup functions table after relocation   Tom Rini
• [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment   Marek Vasut
• [U-Boot] Help with USB keyboards: EHCI timeout error   John Donnelly
• [U-Boot] Pull request: u-boot-arm/master - UPDATED   Tom Rini
• [U-Boot] [U-Boot, 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: trats2: dfu: Enable default Poll Timeout for Trats2 board   Tom Rini
• [U-Boot] [U-Boot, 3/3] config: Update envs for trats and trats2 - Disable L2 cache   Tom Rini
• [U-Boot] [U-Boot, v2] nand, gpmc: fix reading after switching ecc   Tom Rini
• [U-Boot] cosmetic: uImage.FIT: fix documents   Tom Rini
• [U-Boot] vexpress/armv8: Fix incorrect ethernet controller   Tom Rini
• [U-Boot] Help with USB keyboards: EHCI timeout error   Wolfgang Denk
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] [PATCH 1/3] config: Update envs for trats and trats2 - new entries for new partitions   Gerhard Sittig
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] Compiling fw_printenv tool   Alexey Smishlayev
• [U-Boot] [PATCH 1/3] sf: ops: Squash the malloc+memset combo   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/3] sf: Use shortcut names   Jagannadha Sutradharudu Teki
• [U-Boot] A list of dead email addresses of board maintainers   Detlev Zundel
• [U-Boot] [PATCH 1/3] sf: ops: Squash the malloc+memset combo   Marek Vasut
• [U-Boot] [PATCH 1/3] sf: ops: Squash the malloc+memset combo   Jagan Teki
• [U-Boot] Fat write problem   Detlev Zundel
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] Fat write problem   Ruud Commandeur
• [U-Boot] [PATCH] omap3_beagle: use omap3-beagle.dtb for the C4 revision   Robert Nelson
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] [PATCH] omap3_beagle: use omap3-beagle.dtb for the C4 revision   Tom Rini
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Marek Vasut
• [U-Boot] [PATCH 3/3] sf: Use shortcut names   Marek Vasut
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] [PATCH 5/5] ext4: implement exists for ext4fs   Stephen Warren
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Jagan Teki
• [U-Boot] U-boot memory test results   Joe Kulikauskas
• [U-Boot] [PULL] : Please pull u-boot-imx   Fabio Estevam
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Gerhard Sittig
• [U-Boot] [PATCH RFC] usb storage: set env variable to host controller no   Tim Harvey
• [U-Boot] sf: Discussion on quad changes   Gerhard Sittig
• [U-Boot] [PATCH v2 1/2] env_mmc: make board configurable the partition for the environment   Stephen Warren
• [U-Boot] [PATCH v2 2/2] env_mmc: default to 0 if CONFIG_SYS_MMC_ENV_DEV not defined   Stephen Warren
• [U-Boot] U-boot memory test results   Wolfgang Denk
• [U-Boot] [PULL] : Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] driver/ifc:Change accessor function to take care of endianness   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Prabhakar Kushwaha
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Wolfgang Denk
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] Help with USB keyboards: EHCI timeout error   John Donnelly
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Marek Vasut
• [U-Boot] [PATCH 2/3] sf: Shrink spi_slave {}   Marek Vasut
• [U-Boot] [PATCH 0/6] sf: Optimize spi_flash features code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/6] sf: ops: Squash the malloc+memset combo   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/6] sf: Renames on dual_flash stuff   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 5/6] sf: Minor macro cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 6/6] sf: Update bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] [PATCH 1/6] sf: ops: Squash the malloc+memset combo   Marek Vasut
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Marek Vasut
• [U-Boot] [PATCH 3/6] sf: Renames on dual_flash stuff   Marek Vasut
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Marek Vasut
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Jagan Teki
• [U-Boot] [PATCH 3/6] sf: Renames on dual_flash stuff   Jagan Teki
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Jagan Teki
• [U-Boot] Problems with latest U-boot on Mini2440   Peter Germer
• [U-Boot] [PATCH 0/3] arm: vf610: Add QSPI support for VF610   Huan Wang
• [U-Boot] imx6 Solo and LAN8720   Andy Ng
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Andy Ng
• [U-Boot] [PATCH 0/3] PPC 85xx: Add support for QEMU's ppce500 PV machine   Alexander Graf
• [U-Boot] [PATCH 1/3] PPC 85xx: Detect e500v2 / e500mc during runtime   Alexander Graf
• [U-Boot] [PATCH 2/3] PPC 85xx: Add ELF entry point   Alexander Graf
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Fabio Estevam
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Fabio Estevam
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Otavio Salvador
• [U-Boot] [PATCH] yaffs2: Remove block number check from summary verification   Charles Manning
• [U-Boot] changing default serial console from UART0 to UART 1   pshambhu
• [U-Boot] changing default serial console from UART0 to UART 1   Abraham Varricatt
• [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r().   Minkyu Kang
• [U-Boot] Uboot_Header_Modification_by_CVS   Arun K. Varghese
• [U-Boot] changing default serial console from UART0 to UART 1   pshambhu
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   Aneesh Bansal
• [U-Boot] [PATCH 2/2] SECURE BOOT: Add secure boot target for B4860QDS   Aneesh Bansal
• [U-Boot] [PATCH 1/2][v2] powerpc/mpc85xx: SECURE BOOT- add version info for ISBC   Aneesh Bansal
• [U-Boot] [PATCH 2/2][v2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Aneesh Bansal
• [U-Boot] Uboot_Header_Modification_by_CVS   Albert ARIBAUD
• [U-Boot] [PATCH] net/designware - switch driver to phylib usage   Alexey Brodkin
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Michal Simek
• [U-Boot] [i2c] Pull request   Michal Simek
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   Aneesh Bansal
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   Aneesh Bansal
• [U-Boot] [PATCH 3/3] powerpc/mpc85xx: SECURE BOOT- Disable law 0 for non PBL platforms   Aneesh Bansal
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] [i2c] Pull request   Alexey Brodkin
• [U-Boot] [i2c] Pull request   Michal Simek
• [U-Boot] [U-Boot, v1, 2/2] i2c: zynq: Add support for the second i2c controller   Heiko Schocher
• [U-Boot] [PATCH v2] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [i2c] v2 Pull request   Heiko Schocher
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   Wolfgang Denk
• [U-Boot] Uboot_Header_Modification_by_CVS   Wolfgang Denk
• [U-Boot] [PATCH 1/2][v2] powerpc/mpc85xx: SECURE BOOT- add version info for ISBC   Wolfgang Denk
• [U-Boot] [PATCH v2] board_r - fixup functions table after relocation   Masahiro Yamada
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Wolfgang Denk
• [U-Boot] [PATCH] ARM: tegra20: Add a missing entry in the pullid enum   Alban Bedel
• [U-Boot] [PATCH v3] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 3/3] sf: Use shortcut names   Detlev Zundel
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Detlev Zundel
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Detlev Zundel
• [U-Boot] [PATCH 3/3] sf: Use shortcut names   Jagan Teki
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Jagan Teki
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Alexander Khryukin
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Andreas Bießmann
• [U-Boot] How to perform a secure boot on ARM Linux   rakesh ranjan
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Marek Vasut
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Jagan Teki
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Jagan Teki
• [U-Boot] [PATCH 3/6] sf: Renames on dual_flash stuff   Marek Vasut
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Marek Vasut
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Jagan Teki
• [U-Boot] [PATCH 3/6] sf: Renames on dual_flash stuff   Jagan Teki
• [U-Boot] [PATCH] am43xx_evm.h: Correct SPL max size   Tom Rini
• [U-Boot] [PATCH] board:universal: fix i2c adapter   Przemyslaw Marczak
• [U-Boot] [PATCH v2 0/5] sf: Optimize spi_flash features code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 1/5] sf: ops: Squash the malloc+memset combo   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/5] sf: Optimize flash features code   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 3/5] sf: Use mode_bits for dual_flash connection   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 4/5] doc: SPI: Update the dual_flash info   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 5/5] sf: Update bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/6] sf: Update read/write command macros   Detlev Zundel
• [U-Boot] [PATCH v2 1/5] sf: ops: Squash the malloc+memset combo   Fabio Estevam
• [U-Boot] [PATCH v2 1/5] sf: ops: Squash the malloc+memset combo   Jagan Teki
• [U-Boot] [PATCH v2 1/5] sf: ops: Squash the malloc+memset combo   Fabio Estevam
• [U-Boot] [PATCH v2 1/5] sf: ops: Squash the malloc+memset combo   Jagan Teki
• [U-Boot] How to perform a secure boot on ARM Linux   Detlev Zundel
• [U-Boot] [PATCH] doc: README: Correct file name of signature verification documentation   Detlev Zundel
• [U-Boot] [PATCH v3] sf: Update bank configuration   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3] sf: ops: Squash the malloc+memset combo   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] Revert "fdt_support: 64bit initrd start address support"   Otavio Salvador
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] How to perform a secure boot on ARM Linux   Jagan Teki
• [U-Boot] How to perform a secure boot on ARM Linux   Marek Vasut
• [U-Boot] booting os 'Unknown OS' (1) is not supported   Wolfgang Denk
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] Help   Moon Moon
• [U-Boot] [PATCH REPOST4 1/2] ARM: rpi_b: power on SDHCI and USB HW modules   Stephen Warren
• [U-Boot] Help   Jeroen Hofstee
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   Scott Wood
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 3/3] powerpc/mpc85xx: SECURE BOOT- Disable law 0 for non PBL platforms   Scott Wood
• [U-Boot] [PATCH 0/5] preparation to intriduce keystone support   Murali Karicheri
• [U-Boot] [PATCH 1/5] tools: mkimage: add support for gpimage format   Murali Karicheri
• [U-Boot] [PATCH 2/5] ubifs: fix checkpatch warning   Murali Karicheri
• [U-Boot] [PATCH 3/5] ubifs: return filesize from ubifs load operations   Murali Karicheri
• [U-Boot] [PATCH 4/5] arm: add support for arch timer   Murali Karicheri
• [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Murali Karicheri
• [U-Boot] [PATCH 2/2][v2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   Scott Wood
• [U-Boot] [PATCH 1/5] tools: mkimage: add support for gpimage format   Wolfgang Denk
• [U-Boot] [PATCH] fdt_support.c: Correct linux, initrd-start/end setting   Tom Rini
• [U-Boot] [PATCH 4/5] arm: add support for arch timer   Wolfgang Denk
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Scott Wood
• [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Wolfgang Denk
• [U-Boot] [PATCH 1/5] tools: mkimage: add support for gpimage format   Tom Rini
• [U-Boot] [PULL] : Please pull u-boot-imx   Tom Rini
• [U-Boot] [i2c] v2 Pull request   Tom Rini
• [U-Boot] [U-Boot, REPOST4, 1/2] ARM: rpi_b: power on SDHCI and USB HW modules   Tom Rini
• [U-Boot] [U-Boot, REPOST4, 2/2] ARM: bcm2835: fix mailbox timeout   Tom Rini
• [U-Boot] fs/ext4: fix partition size get truncated in calculation   Tom Rini
• [U-Boot] fs/ext4: fix calling put_ext4 with truncated offset   Tom Rini
• [U-Boot] [U-Boot, 1/2] ext4fs: use EXT2_BLOCK_SIZE instead of fs->blksz   Tom Rini
• [U-Boot] [U-Boot,2/2] ext4fs: fix "invalid extent block" error   Tom Rini
• [U-Boot] .gitignore: ignore u-boot.elf and tools/relocate-rela   Tom Rini
• [U-Boot] board:universal: fix i2c adapter   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] spl: common: Properly ignore spl/Makefile in .gitignore   Tom Rini
• [U-Boot] yaffs2: Remove block number check from summary verification   Tom Rini
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Marek Vasut
• [U-Boot] [ANN] U-Boot v2014.01 released   Tom Rini
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [PATCH 1/3] PPC 85xx: Detect e500v2 / e500mc during runtime   Scott Wood
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Wolfgang Denk
• [U-Boot] [PATCH 1/2] powerpc/t208x: some update to support t2081   Shengzhou Liu
• [U-Boot] [PATCH 2/2] powerpc/t2081qds: Add T2081 QDS board support   Shengzhou Liu
• [U-Boot] [PATCH 2/2] powerpc/t2081qds: Add T2081 QDS board support   Shengzhou Liu
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Wolfgang Denk
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   York Sun
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Jagan Teki
• [U-Boot] U-boot porting experiment -- which board or CPU will be good for doing it first time   allan George
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Jagan Teki
• [U-Boot] Fat write problem   Ruud Commandeur
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Wolfgang Denk
• [U-Boot] [PATCH] ext4fs: Add ext4 extent cache for read operations   Ionut Nicu
• [U-Boot] [PATCH 0/3] Serial Flash: call spi_flash_free more coherently   Valentin Longchamp
• [U-Boot] [PATCH] fdt_support.c: Correct linux, initrd-start/end setting   FengHua
• [U-Boot] [ANN] U-Boot v2014.01 released   Wolfgang Denk
• [U-Boot] tried to boot linux with armv8 fvp model   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH v3] board_r - fixup functions table after relocation   Simon Glass
• [U-Boot] [PATCH 1/4] microblaze: Show u-boot banner   Michal Simek
• [U-Boot] [PATCH 2/4] microblaze: Report priviledged or stack protection exception   Michal Simek
• [U-Boot] [PATCH 3/4] microblaze: Enable buffer write for NOR flashes   Michal Simek
• [U-Boot] [PATCH 4/4] microblaze: Add SPL support   Michal Simek
• [U-Boot] [PATCH v3] board_r - fixup functions table after relocation   Alexey Brodkin
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   Scott Wood
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   York Sun
• [U-Boot] [PATCH 2/6] sf: Optimize flash features code   Marek Vasut
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Tim Harvey
• [U-Boot] [PATCH 1/5] tools: mkimage: add support for gpimage format   Wolfgang Denk
• [U-Boot] [PATCH 4/5] arm: add support for arch timer   Wolfgang Denk
• [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ARM: m53evk: Rename mxc-nand to mxc_nand   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: m53evk: Enable CONFIG_REGEX   Marek Vasut
• [U-Boot] [PATCH 1/5] tools: mkimage: add support for gpimage format   Tom Rini
• [U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS   York Sun
• [U-Boot] [PATCH 1/3] am335x_evm: Enable GPT commands   Tom Rini
• [U-Boot] [PATCH 2/3] am43xx_evm: Enable GPT commands   Tom Rini
• [U-Boot] [PATCH 3/3] dra7xx_evm: Enable GPT commands   Tom Rini
• [U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL   York Sun
• [U-Boot] [PATCH v6 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL   York Sun
• [U-Boot] [PATCH][v2] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI   York Sun
• [U-Boot] [PATCH][v3] powerpc/t1040qds: Update DDR initialization related settings   York Sun
• [U-Boot] [PATCH][v2] powerpc/83xx: Add support for get_svr() for 83xx devices   York Sun
• [U-Boot] [PATCH v2] powerpc/t2080qds: some update for t2080qds   York Sun
• [U-Boot] [PATCH] powerpc/85xx: update erratum a006379   York Sun
• [U-Boot] [PATCH v3] t2080qds/ddr: update ddr parameters   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx:Increase binary size for P, B & T series boards.   York Sun
• [U-Boot] [PATCH] net/fm: revert commit 732dfe090d50af53bb682d0c8971784f8de1f90f   York Sun
• [U-Boot] Pull request u-boot-mpc85xx   York Sun
• [U-Boot] [PATCH REPOST] ARM: tegra: accept any SKU ID for most chips   Stephen Warren
• [U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs   Stephen Warren
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Danny Gale
• [U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs   Tom Warren
• [U-Boot] tried to boot linux with armv8 fvp model   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Markus Niebel
• [U-Boot] [PATCH] serial: uartlite: Reset RX/TX in init   Michal Simek
• [U-Boot] [PATCH] blackfin: The logic of the BF609 macro is opposite.   Sonic Zhang
• [U-Boot] [PATCH] blackfin: init bss early   Sonic Zhang
• [U-Boot] [PATCH] blackfin: Change SMC dcplb entry flag to cover 16M address region   Sonic Zhang
• [U-Boot] [PATCH] mmc: Enabled quirk SDHCI_QUIRK_BROKEN_R1B   Michal Simek
• [U-Boot] [PATCH] fpga: zynq: Correct fpga load when buf is not aligned   Michal Simek
• [U-Boot] [PATCH] blackfin: Initialize the EMAC VLAN with proper default value   Sonic Zhang
• [U-Boot] [PATCH v2 1/2] i2c: zynq: Support for 0-length register address   Michal Simek
• [U-Boot] [PATCH v2 2/2] i2c: zynq: Add support for the second i2c controller   Michal Simek
• [U-Boot] [PATCH] xilinx_spi: Move timeout calculation out of the loop   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: m53evk: Rename mxc-nand to mxc_nand   Stefano Babic
• [U-Boot] [PATCH] blackfin: update default config for bf609   Sonic Zhang
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Wolfgang Denk
• [U-Boot] [PATCH] net/designware - switch driver to phylib usage   Sonic Zhang
• [U-Boot] [PATCH 1/7] zynq: Do not explicitely enable icache   Michal Simek
• [U-Boot] [PATCH 2/7] zynq: Enable dcache support   Michal Simek
• [U-Boot] [PATCH 3/7] zynq: Fix incorrect header name   Michal Simek
• [U-Boot] [PATCH 4/7] zynq: Extend kernel image size to 20MB   Michal Simek
• [U-Boot] [PATCH 5/7] zynq: Enable tftp put command   Michal Simek
• [U-Boot] [PATCH 6/7] zynq: Use board_eth_init if CMD_NET is not enabled   Michal Simek
• [U-Boot] [PATCH 7/7] zynq: Move bootmode to headers   Michal Simek
• [U-Boot] [PATCH] net/designware - switch driver to phylib usage   Alexey Brodkin
• [U-Boot] [PATCH] zynq: serial: Simplify serial driver initialization   Michal Simek
• [U-Boot] [PATCH v6 00/11] Introduce Samsung misc file and LCD menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 01/11] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 02/11] trats2: Code cleanup.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 03/11] samsung: common: Add file for common functions, draw_logo() cleanup.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 04/11] common: lcd.c: fix data abort exception when try to access bmp header   Przemyslaw Marczak
• [U-Boot] [PATCH v6 05/11] lib: tizen: change Tizen logo with the new one.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 06/11] video: exynos: fimd: add support for various display color modes   Przemyslaw Marczak
• [U-Boot] [PATCH v6 07/11] samsung: boards: update display configs with 16bpp mode.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 08/11] samsung: misc: Add LCD download menu.   Przemyslaw Marczak
• [U-Boot] [PATCH v6 09/11] trats: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v6 10/11] trats2: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH v6 11/11] universal: add LCD download menu support   Przemyslaw Marczak
• [U-Boot] [PATCH 0/8] ZYNQ CLK update + driver changes   Michal Simek
• [U-Boot] [PATCH 1/8] common: Provide DIV_ROUND_CLOSEST macro   Michal Simek
• [U-Boot] [PATCH 2/8] zynq: Provide a framework to read clock frequencies   Michal Simek
• [U-Boot] [PATCH 3/8] zynq: Update CLK in bdinfo   Michal Simek
• [U-Boot] [PATCH 4/8] zynq: timer: Migrate to zynq clock framework   Michal Simek
• [U-Boot] [PATCH 5/8] zynq: timer: Fix hangs if network activity attempted after about one hour   Michal Simek
• [U-Boot] [PATCH 6/8] net: zynq_gem: Move RCLK details out of driver   Michal Simek
• [U-Boot] [PATCH 7/8] net: zynq_gem: Calculate clock dividers dynamically   Michal Simek
• [U-Boot] [PATCH 8/8] serial_zynq: Migrate to Zynq clock framework   Michal Simek
• [U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected   Fabio Estevam
• [U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings   Przemyslaw Marczak
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Michal Simek
• [U-Boot] [RFC PATCH 2/2] zynq: Implement dump clock command   Michal Simek
• [U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings   Przemyslaw Marczak
• [U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings   Lukasz Majewski
• [U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS   Pantelis Antoniou
• [U-Boot] [PATCH 2/3 V3] esdhc: Detecting 8 bit width before mmc initialization   Pantelis Antoniou
• [U-Boot] [PATCH 3/3 V3] eSDHC: Calculate envaddr accroding to the address format   Pantelis Antoniou
• [U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS   Pantelis Antoniou
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Stefano Babic
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Michal Simek
• [U-Boot] [PATCH] mx6sl: Adjust fdt_addr to avoid address overlapping   Fabio Estevam
• [U-Boot] [PATCH] mx6sl: Adjust fdt_addr to avoid address overlapping   Otavio Salvador
• [U-Boot] [PATCH V2 0/8] arm: add runtime envs describing build   Piotr Wilczek
• [U-Boot] [PATCH V2 1/8] arm:exynos: add cpu revision   Piotr Wilczek
• [U-Boot] [PATCH V2 2/8] arm:s5pc110: add cpu revision   Piotr Wilczek
• [U-Boot] [PATCH V2 3/8] board:samsung:common: set envs with board unified information   Piotr Wilczek
• [U-Boot] [PATCH V2 4/8] board:samsung:goni: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH V2 5/8] board:samsung:universal: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH V2 6/8] board:samsung:trats: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH V2 7/8] board:samsung:trats2: add env variables describing platform   Piotr Wilczek
• [U-Boot] [PATCH V2 8/8] board:samsung:trats/trats2: enable boot with appended and separated DTB   Piotr Wilczek
• [U-Boot] Pull request u-boot-mpc85xx   Tom Rini
• [U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support   Chin Liang See
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3] net/designware: make driver compatible with data cache   Alexey Brodkin
• [U-Boot] [PATCH v2] net/designware - switch driver to phylib usage   Alexey Brodkin
• [U-Boot] [PATCH v3] net/designware: make driver compatible with data cache   Stefan Roese
• [U-Boot] [PATCH v3] net/designware: make driver compatible with data cache   Mischa Jonker
• [U-Boot] [PATCH v3] net/designware: make driver compatible with data cache   Alexey Brodkin
• [U-Boot] Please pull u-boot-mpc85xx   York Sun
• [U-Boot] [PATCH 3/7] zynq: Fix incorrect header name   Jagan Teki
• [U-Boot] [PATCH 2/7] zynq: Enable dcache support   Jagan Teki
• [U-Boot] [PATCH 1/7] zynq: Do not explicitely enable icache   Jagan Teki
• [U-Boot] [PATCH 7/7] zynq: Move bootmode to headers   Jagan Teki
• [U-Boot] how to get u-boot code with arm64: core support   drambo
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Gerhard Sittig
• [U-Boot] [PATCH v2] mx6: Distinguish mx6dual from mx6quad   Fabio Estevam
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Stephen Warren
• [U-Boot] [PATCH 2/6] ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28   Stephen Warren
• [U-Boot] [PATCH 3/6] ARM: tegra: rename OUT_CLK_SOURCE_*   Stephen Warren
• [U-Boot] [PATCH 4/6] ARM: tegra: use MASK_BITS_* macros everywhere   Stephen Warren
• [U-Boot] [PATCH 5/6] ARM: tegra: MASK_BITS_ no longer needs specific values   Stephen Warren
• [U-Boot] [PATCH 6/6] ARM: tegra: implement MASK_BITS_31_29   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: amend pmc.h for Tegra114+   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: don't exceed AVP limits when configuring PLLP   Stephen Warren
• [U-Boot] [PATCH 5/5] NAND: DaVinci: allow forced disable of subpage writes   Scott Wood
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Tom Warren
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Stephen Warren
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Tom Warren
• [U-Boot] [PATCH] serial: sh: Add Support R7S72100 of rmobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] net: sh-eth: Add support R7S72100 of rmobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] net: sh-eth: Fix coding style   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] net: sh-eth: Fix typo from rESR_RTLF to EESR_RTLF   Nobuhiro Iwamatsu
• [U-Boot] File system API: Read file size without reading file contents   Frank Bormann
• [U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: don't exceed AVP limits when configuring PLLP   Stephen Warren
• [U-Boot] [PATCH v15 07/10] arm64: core support   Scott Wood
• [U-Boot] [PATCH v15 07/10] arm64: core support   drambo
• [U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS   Zhang Haijun
• [U-Boot] How to perform a secure boot on ARM Linux   Simon Glass
• [U-Boot] File system API: Read file size without reading file contents   Simon Glass
• [U-Boot] [PATCH 1/2] imx6: ensure AHB clock is 132MHz in low freq boot mode   Anson Huang
• [U-Boot] [PATCH 2/2] imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure   Anson Huang
• [U-Boot] U-boot for 64bit ARMv8   TigerLiu at viatech.com.cn
• [U-Boot] Warnings on arm64 build   Masahiro Yamada
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] Warnings on arm64 build   bhupesh.sharma at freescale.com
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Michal Simek
• [U-Boot] how to get u-boot code with arm64: core support   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH V2 5/8] board:samsung:universal: add env variables describing platform   Przemyslaw Marczak
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] U-Boot execution sequence   JYOTI DUBEY
• [U-Boot] [PATCH V2 1/8] arm:exynos: add cpu revision   Wolfgang Denk
• [U-Boot] POST in u-boot for P2020 process   Wolfgang Denk
• [U-Boot] [PATCH v4 0/2] Refactoring of boards.cfg   Masahiro Yamada
• [U-Boot] [PATCH v4 1/2] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Masahiro Yamada
• [U-Boot] [PATCH v4 2/2] boards.cfg: Delete the equivalent entries   Masahiro Yamada
• [U-Boot] [PATCH v6 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v6 01/38] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v6 02/38] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
• [U-Boot] [PATCH v6 03/38] tools: convert makefiles to kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v6 04/38] board: samsung: refactor host programs   Masahiro Yamada
• [U-Boot] [PATCH v6 05/38] examples: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v6 06/38] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v6 07/38] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v6 08/38] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 09/38] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 10/38] kbuild: import Kbuild.include from linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v6 11/38] kbuild: Use Kbuild.include   Masahiro Yamada
• [U-Boot] [PATCH v6 12/38] Makefile: move more flags to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 13/38] Makefile: refactor include path settings   Masahiro Yamada
• [U-Boot] [PATCH v6 14/38] Makefile: move more stuff to top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 15/38] Makefile: move some flags to spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 16/38] Makefile: move some flags to examples makefiles   Masahiro Yamada
• [U-Boot] [PATCH v6 17/38] kbuild: change out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v6 18/38] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
• [U-Boot] [PATCH v6 19/38] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
• [U-Boot] [PATCH v6 20/38] kbuild: import more build scripts from Linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v6 21/38] kbuild: use Linux Kernel build scripts   Masahiro Yamada
• [U-Boot] [PATCH v6 22/38] kbuild: delete temporary build scripts   Masahiro Yamada
• [U-Boot] [PATCH v6 23/38] kbuild: move some lines to more suitable place   Masahiro Yamada
• [U-Boot] [PATCH v6 24/38] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v6 25/38] kbuild: move include directives of board configuration files   Masahiro Yamada
• [U-Boot] [PATCH v6 26/38] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH v6 27/38] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
• [U-Boot] [PATCH v6 28/38] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
• [U-Boot] [PATCH v6 29/38] examples: move api/ and standalone/ entry to examples/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 30/38] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
• [U-Boot] [PATCH v6 31/38] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v6 32/38] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v6 33/38] kbuild: use scripts/Makefile.clean   Masahiro Yamada
• [U-Boot] [PATCH v6 34/38] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
• [U-Boot] [PATCH v6 35/38] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v6 36/38] board: sandburst: delete FORCEBUILD   Masahiro Yamada
• [U-Boot] [PATCH v6 37/38] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
• [U-Boot] [PATCH v6 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
• [U-Boot] [PATCH 1/3] PPC 85xx: Detect e500v2 / e500mc during runtime   Alexander Graf
• [U-Boot] [PATCH v3 1/2] env_mmc: make board configurable the partition for the environment   Hector Palacios
• [U-Boot] [PATCH v3 2/2] config_fallbacks: default CONFIG_SYS_MMC_ENV_DEV to 0   Hector Palacios
• [U-Boot] U-Boot execution sequence   Abraham Varricatt
• [U-Boot] U-Boot execution sequence   Mj Embd
• [U-Boot] [PATCH v3 1/2] env_mmc: make board configurable the partition for the environment   Otavio Salvador
• [U-Boot] [PATCH v3 2/2] config_fallbacks: default CONFIG_SYS_MMC_ENV_DEV to 0   Otavio Salvador
• [U-Boot] [ Uboot code understanding guide ]   Devarsh gadhia
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] U-Boot execution sequence   Jagan Teki
• [U-Boot] how to get u-boot code with arm64: core support   Detlev Zundel
• [U-Boot] U-boot porting experiment -- which board or CPU will be good for doing it first time   Detlev Zundel
• [U-Boot] how to get u-boot code with arm64: core support   Darwin Rambo
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Danny Gale
• [U-Boot] implementation of generic distro options   Dennis Gilmore
• [U-Boot] [PATCH 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Dennis Gilmore
• [U-Boot] [PATCH 2/2] config: add config_distro_defaults.h   Dennis Gilmore
• [U-Boot] [PATCH V2] ARM: tegra: don't exceed AVP limits when configuring PLLP   Stephen Warren
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Scott Wood
• [U-Boot] [PATCH 2/2] config: add config_distro_defaults.h   Stephen Warren
• [U-Boot] [PATCH] pxe: implement fdtdir extlinux.conf tag   Stephen Warren
• [U-Boot] [PATCH V2 1/5] fs: fix generic save command implementation   Stephen Warren
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Stephen Warren
• [U-Boot] [PATCH V2 3/5] sandbox: implement fs_exists() and 'sb exists' shell function   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ext4: implement exists() for ext4fs   Stephen Warren
• [U-Boot] [PATCH V2 5/5] fat: implement exists() for FAT fs   Stephen Warren
• [U-Boot] [PATCH V2 1/5] ARM: tegra: set env vars to indicate Cardhu A04 support   Stephen Warren
• [U-Boot] [PATCH V2 2/5] ARM: tegra: convert tegra to use distro defaults   Stephen Warren
• [U-Boot] [PATCH V2 3/5] ARM: tegra: rework boot scripts   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ARM: tegra: implement bootcmd_pxe   Stephen Warren
• [U-Boot] [PATCH V2 5/5] ARM: tegra: clear $usb_need_init each boot   Stephen Warren
• [U-Boot] Nand Erase/Write Fails with mtd error -5   mks
• [U-Boot] [PATCH][v0] powerpc/mpc85xx: Update LIODNs for T1040   Poonam Aggrwal
• [U-Boot] [PATCH V2 01/13] mmc: tegra: support Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 02/13] ARM: tegra: misc cleanups triggered by Tegra124 review   Stephen Warren
• [U-Boot] [PATCH V2 03/13] ARM: tegra: enable PLLX only once it's been fully configured   Stephen Warren
• [U-Boot] [PATCH V2 04/13] ARM: tegra: remove a conditional for CSITE rate   Stephen Warren
• [U-Boot] [PATCH V2 05/13] ARM: tegra: only build __pinmux_nand() when it's needed   Stephen Warren
• [U-Boot] [PATCH V2 06/13] ARM: tegra: fix a typo in the tegra114.dtsi   Stephen Warren
• [U-Boot] [PATCH V2 07/13] ARM: tegra: add/edit headers for Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 08/13] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 09/13] ARM: tegra: Add CPU (armv7) files for Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 10/13] ARM: tegra: add common (shared) CPU files   Stephen Warren
• [U-Boot] [PATCH V2 11/13] ARM: tegra: add DT files for Tegra124 and Venice2   Stephen Warren
• [U-Boot] [PATCH V2 12/13] ARM: tegra: add Venice2 (Tegra124) board   Stephen Warren
• [U-Boot] [PATCH V2 13/13] ARM: tegra: fix "bootp" issue for Tegra124 too   Stephen Warren
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] U-boot for 64bit ARMv8   FengHua
• [U-Boot] [PATCH v15 07/10] arm64: core support   FengHua
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [PATCH 1/4] SPL: powerpc: expand SPL's length to 128K   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/4] SPL: P2020RDB: fix the problem booting from spi flash   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/4] SPL: P2020RDB: fix the problem booting from spi flash   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/4] powerpc: p1010rdb: Enable p1010rdb to start from NAND/SD/SPI flash with SPL   ying.zhang at freescale.com
• [U-Boot] U-Boot execution sequence   JYOTI DUBEY
• [U-Boot] [PATCH V2 13/13] ARM: tegra: fix "bootp" issue for Tegra124 too   Jim Lin
• [U-Boot] U-Boot execution sequence   Jagan Teki
• [U-Boot] [PATCH 1/4 v2] SPL: powerpc: expand SPL's length to 128K   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/4 v2] SPL: P2020RDB: fix the problem booting from spi flash   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/4 v2] SPL: P1022DS: fix the problem booting from spi flash   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/4 v2] powerpc: p1010rdb: Enable p1010rdb to start from NAND/SD/SPI flash with SPL   ying.zhang at freescale.com
• [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.   Enric Balletbo Serra
• [U-Boot] [PATCH] ext4fs: Add ext4 extent cache for read operations   Ionut Nicu
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   Zhao Qiang
• [U-Boot] [PATCH] nds32: add support for leopard and orca board boot flow auto detect   Andes
• [U-Boot] [PATCH] config: trats: trats2: extend dfu_alt_info by env update settings   Jaehoon Chung
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v7 01/38] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v7 02/38] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
• [U-Boot] [PATCH v7 03/38] tools: convert makefiles to kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v7 04/38] board: samsung: refactor host programs   Masahiro Yamada
• [U-Boot] [PATCH v7 05/38] examples: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v7 06/38] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v7 07/38] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v7 08/38] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 09/38] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 10/38] kbuild: import Kbuild.include from linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v7 11/38] kbuild: Use Kbuild.include   Masahiro Yamada
• [U-Boot] [PATCH v7 12/38] Makefile: move more flags to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 13/38] Makefile: refactor include path settings   Masahiro Yamada
• [U-Boot] [PATCH v7 14/38] Makefile: move more stuff to top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 15/38] Makefile: move some flags to spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 16/38] Makefile: move some flags to examples makefiles   Masahiro Yamada
• [U-Boot] [PATCH v7 17/38] kbuild: change out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v7 18/38] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
• [U-Boot] [PATCH v7 19/38] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
• [U-Boot] [PATCH v7 20/38] kbuild: import more build scripts from Linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v7 21/38] kbuild: use Linux Kernel build scripts   Masahiro Yamada
• [U-Boot] [PATCH v7 22/38] kbuild: delete temporary build scripts   Masahiro Yamada
• [U-Boot] [PATCH v7 23/38] kbuild: move some lines to more suitable place   Masahiro Yamada
• [U-Boot] [PATCH v7 24/38] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v7 25/38] kbuild: move include directives of board configuration files   Masahiro Yamada
• [U-Boot] [PATCH v7 26/38] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH v7 27/38] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
• [U-Boot] [PATCH v7 28/38] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
• [U-Boot] [PATCH v7 29/38] examples: move api/ and standalone/ entry to examples/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 30/38] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
• [U-Boot] [PATCH v7 31/38] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v7 32/38] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v7 33/38] kbuild: use scripts/Makefile.clean   Masahiro Yamada
• [U-Boot] [PATCH v7 34/38] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
• [U-Boot] [PATCH v7 35/38] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v7 36/38] board: sandburst: delete FORCEBUILD   Masahiro Yamada
• [U-Boot] [PATCH v7 37/38] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
• [U-Boot] [PATCH v7 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
• [U-Boot] U-Boot execution sequence   Fabio Estevam
• [U-Boot] [PATCH] powerpc/t104xrdb: Update T1040RDB.h in config folder   Priyanka Jain
• [U-Boot] [PATCH] nitrogen6x: README: Only calling 'make' is enough   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file   Fabio Estevam
• [U-Boot] [PATCH] powerpc/mpc85xx: Update serdes protocols for T1040   Prabhakar Kushwaha
• [U-Boot] [PATCH] boards/t1040qds: Adds ethernet support for T1040   Prabhakar Kushwaha
• [U-Boot] [RFC PATCH 1/1] Add support for pengwyn board   micro1183
• [U-Boot] [PATCH 0/2] Add External SD Card support for Marvell GplugD   Prafulla Wadaskar
• [U-Boot] about the DABT handler in imx_pcie.c   Marek Vasut
• [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.   Tom Rini
• [U-Boot] [PATCH 2/6] ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28   Thierry Reding
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Wolfgang Denk
• [U-Boot] [PATCH 3/6] ARM: tegra: rename OUT_CLK_SOURCE_*   Thierry Reding
• [U-Boot] [PATCH 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Wolfgang Denk
• [U-Boot] [PATCH 2/2] config: add config_distro_defaults.h   Wolfgang Denk
• [U-Boot] [PATCH 5/6] ARM: tegra: MASK_BITS_ no longer needs specific values   Thierry Reding
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Thierry Reding
• [U-Boot] [PATCH V2 01/13] mmc: tegra: support Tegra124   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] cmd_pxe.c add any option for filesystem with sysboot uses generic load   Tom Rini
• [U-Boot] Nand Erase/Write Fails with mtd error -5   Wolfgang Denk
• [U-Boot] [PATCH] nitrogen6x: README: Only calling 'make' is enough   Eric Nelson
• [U-Boot] [PATCH] ARM: tegra: amend pmc.h for Tegra114+   Thierry Reding
• [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file   Eric Nelson
• [U-Boot] [RFC PATCH 1/1] Add support for pengwyn board   Gerhard Sittig
• [U-Boot] [RFC PATCH 1/1] Add support for pengwyn board   Wolfgang Denk
• [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.   Enric Balletbo Serra
• [U-Boot] [PATCH V2] ARM: tegra: don't exceed AVP limits when configuring PLLP   Thierry Reding
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH 0/2] Add External SD Card support for Marvell GplugD   Ajay Bhargav
• [U-Boot] [PATCH 2/2] config: add config_distro_defaults.h   Dennis Gilmore
• [U-Boot] [PATCH V2 07/13] ARM: tegra: add/edit headers for Tegra124   Thierry Reding
• [U-Boot] about the DABT handler in imx_pcie.c   Marek Vasut
• [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
• [U-Boot] [PATCH V2 08/13] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124   Thierry Reding
• [U-Boot] [PATCH V2 01/13] mmc: tegra: support Tegra124   Thierry Reding
• [U-Boot] [PATCH] pxe: implement fdtdir extlinux.conf tag   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx   Tom Rini
• [U-Boot] [PATCH 2/6] ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28   Stephen Warren
• [U-Boot] [PATCH 3/6] ARM: tegra: rename OUT_CLK_SOURCE_*   Stephen Warren
• [U-Boot] [PATCH 5/6] ARM: tegra: MASK_BITS_ no longer needs specific values   Stephen Warren
• [U-Boot] [PATCH 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Stephen Warren
• [U-Boot] [PATCH V2 1/6] ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum   Stephen Warren
• [U-Boot] [PATCH V2 2/6] ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28   Stephen Warren
• [U-Boot] [PATCH V2 3/6] ARM: tegra: rename OUT_CLK_SOURCE_*   Stephen Warren
• [U-Boot] [PATCH V2 4/6] ARM: tegra: use MASK_BITS_* macros everywhere   Stephen Warren
• [U-Boot] [PATCH V2 5/6] ARM: tegra: MASK_BITS_ no longer needs specific values   Stephen Warren
• [U-Boot] [PATCH V2 6/6] ARM: tegra: implement MASK_BITS_31_29   Stephen Warren
• [U-Boot] [PATCH] pxe: implement fdtdir extlinux.conf tag   Stephen Warren
• [U-Boot] [PATCH V2] ARM: tegra: amend pmc.h for Tegra114+   Stephen Warren
• [U-Boot] [PATCH V2] ARM: tegra: don't exceed AVP limits when configuring PLLP   Stephen Warren
• [U-Boot] [PATCH V3] ARM: tegra: don't exceed AVP limits when configuring PLLP   Stephen Warren
• [U-Boot] [PATCH V2 07/13] ARM: tegra: add/edit headers for Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 08/13] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124   Stephen Warren
• [U-Boot] [PATCH][v2] driver/ifc:Change accessor function to take care of endianness   York Sun
• [U-Boot] [PATCH V2 07/13] ARM: tegra: add/edit headers for Tegra124   Stephen Warren
• [U-Boot] [PATCH] pxe: implement fdtdir extlinux.conf tag   Dennis Gilmore
• [U-Boot] [PATCH V2 08/13] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124   Stephen Warren
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   Scott Wood
• [U-Boot] [PATCH 1/1] feature-removal-schedule.txt: Drop CONFIG_SYS_ENABLE_PADS_ALL/CLOCKS_ENABLE_ALL   Tom Rini
• [U-Boot] [PATCH V3 01/14] mmc: tegra: support Tegra124   Stephen Warren
• [U-Boot] [PATCH V3 02/14] ARM: tegra: misc cleanups triggered by Tegra124 review   Stephen Warren
• [U-Boot] [PATCH V3 03/14] ARM: tegra: pass just partition ID to power_partition()   Stephen Warren
• [U-Boot] [PATCH V3 04/14] ARM: tegra: enable PLLX only once it's been fully configured   Stephen Warren
• [U-Boot] [PATCH V3 05/14] ARM: tegra: remove a conditional for CSITE rate   Stephen Warren
• [U-Boot] [PATCH V3 06/14] ARM: tegra: only build __pinmux_nand() when it's needed   Stephen Warren
• [U-Boot] [PATCH V3 07/14] ARM: tegra: fix a typo in the tegra114.dtsi   Stephen Warren
• [U-Boot] [PATCH V3 08/14] ARM: tegra: add/edit headers for Tegra124   Stephen Warren
• [U-Boot] [PATCH V3 09/14] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124   Stephen Warren
• [U-Boot] [PATCH V3 10/14] ARM: tegra: Add CPU (armv7) files for Tegra124   Stephen Warren
• [U-Boot] [PATCH V3 11/14] ARM: tegra: add common (shared) CPU files   Stephen Warren
• [U-Boot] [PATCH V3 12/14] ARM: tegra: add DT files for Tegra124 and Venice2   Stephen Warren
• [U-Boot] [PATCH V3 13/14] ARM: tegra: add Venice2 (Tegra124) board   Stephen Warren
• [U-Boot] [PATCH V3 14/14] ARM: tegra: fix "bootp" issue for Tegra124 too   Stephen Warren
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] [U-Boot, 1/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: AM43xx: Enable DDR dynamic IO power down for DDR3   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: AM335x: Enable DDR dynamic IO power down   Tom Rini
• [U-Boot] DRA7: Add support for ES1.1 silicon ID code   Tom Rini
• [U-Boot] DRA7: add ABB setup for MPU voltage domain   Tom Rini
• [U-Boot] am43xx_evm.h: Correct SPL max size   Tom Rini
• [U-Boot] [PATCH 1/1] feature-removal-schedule.txt: Drop CONFIG_SYS_ENABLE_PADS_ALL/CLOCKS_ENABLE_ALL   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Scott Wood
• [U-Boot] [PATCH] Add lzmadec command   Tom Rini
• [U-Boot] [PATCH v3 1/2] boards.cfg: Place "-" in the 8th field if it is the same as 7th   Tom Rini
• [U-Boot] [PATCH] README: document CONFIG_CMD_FS_GENERIC   Stephen Warren
• [U-Boot] [PATCH] common, ubi: add ubi check volumename command   Heiko Schocher
• [U-Boot] [PATCH] common, itest: pass u-boot env variables to itest.s   Heiko Schocher
• [U-Boot] [PATCH] i2c, bootcount: add support for bootcounter on i2c devices   Heiko Schocher
• [U-Boot] [PATCH] powerpc/mpc85xx:Fix README to show correct flash memory map   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/7] common, fit, rsa: enhancements   Heiko Schocher
• [U-Boot] [PATCH 1/7] tools/image-host: fix sign-images bug   Heiko Schocher
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
• [U-Boot] [PATCH 3/7] fit: add sha256 support   Heiko Schocher
• [U-Boot] [PATCH 4/7] rsa: add sha256-rsa2048 algorithm   Heiko Schocher
• [U-Boot] [PATCH 5/7] rsa: add sha256,rsa4096 algorithm   Heiko Schocher
• [U-Boot] [PATCH 6/7] tools, fit: add fit_info host command   Heiko Schocher
• [U-Boot] [PATCH 7/7] tools, fit_check_sign: verify a signed fit image   Heiko Schocher
• [U-Boot] [PATCH 0/3] mpc83xx: add support for the ids8313 board   Heiko Schocher
• [U-Boot] [PATCH 1/3] powerpc, ids8247: create vendor board dir ids   Heiko Schocher
• [U-Boot] [PATCH 2/3] mpc8313, bootcount: mpc8313 has no qe muram   Heiko Schocher
• [U-Boot] [PATCH 3/3] mpc83xx: add ids8313 support   Heiko Schocher
• [U-Boot] [PATCH] driver/fsl_pci:Update print to display PCIe generation   Prabhakar Kushwaha
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Brian Norris
• [U-Boot] [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset   Brian Norris
• [U-Boot] [PATCH v1 2/2] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver   Brian Norris
• [U-Boot] [PATCH] powerpc/t104xrdb: Update T1042RDB.h in config folder   Prabhakar Kushwaha
• [U-Boot] On imx6 Solo the mmc fails to read for a second time..   Andy Ng
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   Timur Tabi
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   Timur Tabi
• [U-Boot] [PATCH] hummingboard: Return from cpu_eth_init() directly   Fabio Estevam
• [U-Boot] T4QDS e6500 core and U-Boot 64-bit   York Sun
• [U-Boot] how to get u-boot code with arm64: core support   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH v2] boards.cfg: Keep the entries sorted   Fabio Estevam
• [U-Boot] On imx6 Solo the mmc fails to read for a second time..   Andy Ng
• [U-Boot] [PATCH] OMAP3: igep00x0: Enable required clocks for GPIO that are used.   Enric Balletbo i Serra
• [U-Boot] how to get u-boot code with arm64: core support   drambo
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   qiang.zhao at freescale.com
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   Timur Tabi
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   qiang.zhao at freescale.com
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   Timur Tabi
• [U-Boot] [PATCH 1/3] mpc85xx: Add support for the supplement configuration unit register   Tang Yuantian
• [U-Boot] [PATCH 2/3] mpc85xx: Add deep sleep framework support   Tang Yuantian
• [U-Boot] [PATCH 3/3] mpc85xx: Add deep sleep support on T1040QDS   Tang Yuantian
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   qiang.zhao at freescale.com
• [U-Boot] [PATCH 1/4] ARM: armv7: Make indirect vector addresses globl   Stefano Babic
• [U-Boot] [PATCH V3 2/4] ARM: mx6: Add PCI express clock configuration   Stefano Babic
• [U-Boot] [PATCH V2 3/4] ARM: mx6: Add PCI express driver   Stefano Babic
• [U-Boot] [PATCH V2 4/4] ARM: mx6: Enable PCIe on Sabrelite   Stefano Babic
• [U-Boot] [PATCH v2] mx6: Distinguish mx6dual from mx6quad   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: README: Only calling 'make' is enough   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: m53evk: Rename mxc-nand to mxc_nand   Stefano Babic
• [U-Boot] [PATCH 2/2] ARM: m53evk: Enable CONFIG_REGEX   Stefano Babic
• [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040   Timur Tabi
• [U-Boot] [PATCH V2 1/5] fs: fix generic save command implementation   Simon Glass
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Simon Glass
• [U-Boot] [PATCH V2 3/5] sandbox: implement fs_exists() and 'sb exists' shell function   Simon Glass
• [U-Boot] [PATCH V2 4/5] ext4: implement exists() for ext4fs   Simon Glass
• [U-Boot] [PATCH V2 5/5] fat: implement exists() for FAT fs   Simon Glass
• [U-Boot] [PATCH] Add lzmadec command   Simon Glass
• [U-Boot] [PATCH V3 01/14] mmc: tegra: support Tegra124   Simon Glass
• [U-Boot] [PATCH v3 1/2] imx: Introduce a header for the imx cpu versions   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] mx6: Distinguish mx6dual from mx6quad   Fabio Estevam
• [U-Boot] fdt performance   Simon Glass
• [U-Boot] [PATCH v4 1/2] imx: Introduce a header for the imx cpu versions   Fabio Estevam
• [U-Boot] [PATCH v4 2/2] mx6: Distinguish mx6dual from mx6quad   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Distinguish mx6dual from mx6quad   Fabio Estevam
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Wolfgang Denk
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Simon Glass
• [U-Boot] [PATCH 1/7] tools/image-host: fix sign-images bug   Simon Glass
• [U-Boot] [PATCH 3/7] fit: add sha256 support   Simon Glass
• [U-Boot] [PATCH 4/7] rsa: add sha256-rsa2048 algorithm   Simon Glass
• [U-Boot] [PATCH 5/7] rsa: add sha256,rsa4096 algorithm   Simon Glass
• [U-Boot] [PATCH v4 2/2] mx6: Distinguish mx6dual from mx6quad   Stefano Babic
• [U-Boot] [PATCH v4 2/2] mx6: Distinguish mx6dual from mx6quad   Otavio Salvador
• [U-Boot] [PATCH v3] arm: exynos: change to use clrbits macro instead of readl/writel function   Inha Song
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Andreas Färber
• [U-Boot] Fwd: [ Uboot code understanding guide ]   Devarsh gadhia
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
• [U-Boot] [PATCH 4/7] rsa: add sha256-rsa2048 algorithm   Heiko Schocher
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   Wolfgang Denk
• [U-Boot] POST in u-boot for P2020 process   Wolfgang Denk
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 2/2][v2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 3/3] powerpc/mpc85xx: SECURE BOOT- Disable law 0 for non PBL platforms   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 5/7] rsa: add sha256,rsa4096 algorithm   Heiko Schocher
• [U-Boot] [PATCH 2/7] fdt: add "fdt sign" command   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR   Zhao Qiang
• [U-Boot] [PATCH v2 2/2] Powerpc/QE: Add QE support for T1040   Zhao Qiang
• [U-Boot] [PATCH] [v2] powerpc/t104xrdb: Update T1040RDB.h in config folder   Priyanka Jain
• [U-Boot] [PATCH][v2] powerpc/t104xrdb: Update T1042RDB.h in config folder   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/usb: Enable dual phy for T1040   Nikhil Badola
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] [PATCH 2/2][v2] boards/t1040qds: Adds ethernet support for T1040   Prabhakar Kushwaha
• [U-Boot] POST in u-boot for P2020 process   pshambhu
• [U-Boot] [RFC PATCH 1/1] Add support for pengwyn board   micro1183
• [U-Boot] [PATCH v2 0/9] Further support for the kmp204x architecture   Valentin Longchamp
• [U-Boot] [PATCH v2 1/9] kmp204x: support for QRIO1 bootcounter   Valentin Longchamp
• [U-Boot] [PATCH v2 2/9] kmp204x: introduce QRIO GPIO functions   Valentin Longchamp
• [U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added   Valentin Longchamp
• [U-Boot] [PATCH v2 4/9] kmp204x: implement workaround for A-006559   Valentin Longchamp
• [U-Boot] [PATCH v2 5/9] kmp204x: add support for the kmcoge4 board   Valentin Longchamp
• [U-Boot] [PATCH v2 6/9] kmp204x: update I2C field of RCW   Valentin Longchamp
• [U-Boot] [PATCH v2 7/9] KM: add the KM_UBI_PART_BOOT_OPTS #define   Valentin Longchamp
• [U-Boot] [PATCH v2 8/9] kmp204x: enable support for SPANSION SPI NOR   Valentin Longchamp
• [U-Boot] [PATCH v2 9/9] kmp204x: initial support for PCIe FPGA configuration   Valentin Longchamp
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Fabio Estevam
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Exynos4: add support for device tree   Piotr Wilczek
• [U-Boot] [PATCH 1/9] exynos4:pinmux:fdt: decode peripheral id   Piotr Wilczek
• [U-Boot] [PATCH 2/9] video:mipidsim:fdt: Add DT support for mipi dsim driver   Piotr Wilczek
• [U-Boot] [PATCH 3/9] video:exynos_fb:fdt: add additional fdt data   Piotr Wilczek
• [U-Boot] [PATCH 4/9] drivers:mmc:sdhci: enable support for DT   Piotr Wilczek
• [U-Boot] [PATCH 5/9] arm:exynos: add common board file for exynos 4   Piotr Wilczek
• [U-Boot] [PATCH 6/9] board:origen:fdt: Enable device tree on Origen   Piotr Wilczek
• [U-Boot] [PATCH 7/9] board:universal:fdt: Enable device tree on Universal   Piotr Wilczek
• [U-Boot] [PATCH 8/9] trats:fdt: Enable device tree on Trats   Piotr Wilczek
• [U-Boot] [PATCH 9/9] board:trats2:fdt: Enable device tree on Trats2   Piotr Wilczek
• [U-Boot] POST in u-boot for P2020 process   Wolfgang Denk
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   Wolfgang Denk
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Wolfgang Denk
• [U-Boot] Fwd: [ Uboot code understanding guide ]   Wolfgang Denk
• [U-Boot] POST in u-boot for P2020 process   Wolfgang Denk
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Stefano Babic
• [U-Boot] [PATCH v2] boards.cfg: Keep the entries sorted   Tom Rini
• [U-Boot] lib: time: add weak timer_init() function   Tom Rini
• [U-Boot] lib: fix return codes when CONFIG_SYS_VSNPRINTF is enabled   Tom Rini
• [U-Boot] cosmetic: tools/scripts/README: insert only one space between words   Tom Rini
• [U-Boot] tools: move kermit files to tools/kermit directory   Tom Rini
• [U-Boot] cosmetic: tools/scripts/README: insert only one space between words   Tom Rini
• [U-Boot] [U-Boot,v2] Remove obsolete _LINUX_CONFIG_H macro   Tom Rini
• [U-Boot] avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk   Tom Rini
• [U-Boot] avr32: delete unused header files   Tom Rini
• [U-Boot] blackfin: delete unused header files   Tom Rini
• [U-Boot] powerpc: delete unused header files   Tom Rini
• [U-Boot] x86: delete unused header files   Tom Rini
• [U-Boot] board: delete unused header files   Tom Rini
• [U-Boot] include: delete unused header files   Tom Rini
• [U-Boot] drivers: delete unused header files   Tom Rini
• [U-Boot] board: tec-ng: Do not make directories in a board Makefile   Tom Rini
• [U-Boot] [U-Boot, v2] powerpc: ppc4xx: remove redundant CONFIG_4xx definition   Tom Rini
• [U-Boot] [U-Boot, v2] powerpc: mpc83xx: remove redundant CONFIG_MPC83xx definition   Tom Rini
• [U-Boot] [U-Boot, v2] powerpc: mpc8xx: remove redundant CONFIG_8xx definition   Tom Rini
• [U-Boot] powerpc: mpc512x: remove redundant CONFIG_MPC512X definition   Tom Rini
• [U-Boot] powerpc: mpc5xx: remove redundant CONFIG_5xx definition   Tom Rini
• [U-Boot] powerpc: mpc824x: remove redundant CONFIG_MPC824X definition   Tom Rini
• [U-Boot] powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk   Tom Rini
• [U-Boot] powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk   Tom Rini
• [U-Boot] [U-Boot, v2] ARM: merge commonly-defined PLATFORM_RELFLAGS   Tom Rini
• [U-Boot] sandbox: fix the return type of os_free() function   Tom Rini
• [U-Boot] board: delete meaningless serial.h   Tom Rini
• [U-Boot] [U-Boot, v3] powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] spl: common: Move FAT funcs to a common file   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] spl: common: Support for USB MSD FAT image loading   Tom Rini
• [U-Boot] [U-Boot,v2,4/4] arm: am43xx: Add USB spl boot support   Tom Rini
• [U-Boot] [U-Boot, v3] board_r - fixup functions table after relocation   Tom Rini
• [U-Boot] [PATCH 1/8] arm/km: drop unneeded define   Holger Brunck
• [U-Boot] [PATCH 2/8] arm/km: make local function startup_allowed static   Holger Brunck
• [U-Boot] [PATCH 3/8] arm/km/suv31: switch to 256MB RAM   Holger Brunck
• [U-Boot] [PATCH 4/8] arm/km: add CONFIG_KM_BOARD_EXTRA_ENV to default environment   Holger Brunck
• [U-Boot] [PATCH 5/8] arm/km: fix wrong error handling   Holger Brunck
• [U-Boot] [PATCH 6/8] arm/km: enable FDT for km_kirwkood   Holger Brunck
• [U-Boot] [PATCH 7/8] arm/km: define fdt_high env variable and allow backwards compatibility   Holger Brunck
• [U-Boot] [PATCH 8/8] arm/km: introduce kmsugp1 target   Holger Brunck
• [U-Boot] [PATCH] mx6qsabreauto: Update imximage.cfg   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Add splash screen support   Fabio Estevam
• [U-Boot] sandbox: fix the return type of os_free() function   Simon Glass
• [U-Boot] [PATCH] sandbox: Use system headers first for sandbox's os.c in a different way   Simon Glass
• [U-Boot] [PATCH] arm/da850 : [RFC] add bootdsp to cmd_elf   Paul Chavent
• [U-Boot] [PATCH V2 13/13] ARM: tegra: fix "bootp" issue for Tegra124 too   Stephen Warren
• [U-Boot] [PATCH V3 01/14] mmc: tegra: support Tegra124   Stephen Warren
• [U-Boot] [PATCH V2 1/5] fs: fix generic save command implementation   Stephen Warren
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Stephen Warren
• [U-Boot] [PATCH V2 5/5] fat: implement exists() for FAT fs   Stephen Warren
• [U-Boot] [PATCH V3 01/14] mmc: tegra: support Tegra124   Simon Glass
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/7] rsa: add sha256-rsa2048 algorithm   Simon Glass
• [U-Boot] [PATCH 5/7] rsa: add sha256,rsa4096 algorithm   Simon Glass
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Gupta, Pekon
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Simon Glass
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Tim Harvey
• [U-Boot] [PATCH] at91sam9263ek: add mmc support   Andreas Henriksson
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Andreas Färber
• [U-Boot] [PATCH 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
• [U-Boot] [PATCH 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
• [U-Boot] [PATCH 3/6] gpio: kona: Add Kona gpio driver   Darwin Rambo
• [U-Boot] [PATCH 4/6] i2c: kona: Add Kona I2C driver   Darwin Rambo
• [U-Boot] [PATCH 5/6] mmc: kona: Add Kona mmc driver   Darwin Rambo
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Brian Norris
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Wolfgang Denk
• [U-Boot] Pull request: u-boot-spi/master   Marek Vasut
• [U-Boot] [PATCH V3 01/12] fs: fix generic save command implementation   Stephen Warren
• [U-Boot] [PATCH V3 02/12] fs: implement infra-structure for an 'exists' function   Stephen Warren
• [U-Boot] [PATCH V3 03/12] fs: don't pass NULL dev_desc to most filesystems   Stephen Warren
• [U-Boot] [PATCH V3 04/12] cmd_test: use table lookup for parsing   Stephen Warren
• [U-Boot] [PATCH V3 05/12] cmd_test: check for binary operators before unary   Stephen Warren
• [U-Boot] [PATCH V3 06/12] cmd_test: implement ! on sub-expressions   Stephen Warren
• [U-Boot] [PATCH V3 07/12] cmd_test: evaluate to false without any arguments   Stephen Warren
• [U-Boot] [PATCH V3 08/12] cmd_test: implement -e test for file existence   Stephen Warren
• [U-Boot] [PATCH V3 09/12] sandbox: implement exists() function   Stephen Warren
• [U-Boot] [PATCH V3 10/12] sandbox: enable CONFIG_CMD_FS_GENERIC   Stephen Warren
• [U-Boot] [PATCH V3 11/12] ext4: implement exists() for ext4fs   Stephen Warren
• [U-Boot] [PATCH V3 12/12] fat: implement exists() for FAT fs   Stephen Warren
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Stephen Warren
• [U-Boot] [PATCH V2 2/5] fs: implement infra-structure for an 'exists' function   Wolfgang Denk
• [U-Boot] [PATCH] SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK   Tom Rini
• [U-Boot] [PATCH 01/10] ARM: IXP: Remove actux1 board   Marek Vasut
• [U-Boot] [PATCH 02/10] ARM: IXP: Remove actux2 board   Marek Vasut
• [U-Boot] [PATCH 03/10] ARM: IXP: Remove actux3 board   Marek Vasut
• [U-Boot] [PATCH 04/10] ARM: IXP: Remove actux4 board   Marek Vasut
• [U-Boot] [PATCH 05/10] ARM: IXP: Remove dvl_host board   Marek Vasut
• [U-Boot] [PATCH 06/10] ARM: IXP: Remove the IXP architecture support   Marek Vasut
• [U-Boot] [PATCH 07/10] ARM: USB: Remove the IXP EHCI driver   Marek Vasut
• [U-Boot] [PATCH 08/10] ARM: PCI: Remove the IXP PCI driver   Marek Vasut
• [U-Boot] [PATCH 09/10] ARM: NET: Remove the IXP NPE ethernet driver   Marek Vasut
• [U-Boot] [PATCH 10/10] ARM: serial: Remove the IXP UART driver   Marek Vasut
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Tim Harvey
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 01/10] ARM: IXP: Remove actux1 board   Wolfgang Denk
• [U-Boot] [PATCH 10/10] ARM: serial: Remove the IXP UART driver   Wolfgang Denk
• [U-Boot] [PATCH 1/3] powerpc/p1010rdb: SECURE BOOT- define CONFIG_SYS_RAMBOOT for NAND boot   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SECURE BOOT: add version info for ISBC   aneesh.bansal at freescale.com
• [U-Boot] [PATCH 1/10 V2] ARM: IXP: Remove actux1 board   Marek Vasut
• [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024   Sonic Zhang
• [U-Boot] [PATCH 2/4] blackfin: add spi and i2c specific get clock functions   Sonic Zhang
• [U-Boot] [PATCH 3/4] blackfin: rename bfin-twi_i2c driver to adi_i2c   Sonic Zhang
• [U-Boot] [PATCH 4/4] blackfin: make i2c driver blackfin independant   Sonic Zhang
• [U-Boot] [PATCH 2/10 V2] ARM: IXP: Remove actux2 board   Marek Vasut
• [U-Boot] [PATCH 3/10 V2] ARM: IXP: Remove actux3 board   Marek Vasut
• [U-Boot] [PATCH 4/10 V2] ARM: IXP: Remove actux4 board   Marek Vasut
• [U-Boot] [PATCH 5/10 V2] ARM: IXP: Remove dvl_host board   Marek Vasut
• [U-Boot] [PATCH] powerpc/t104xrdb: Add basic ethernet support   Priyanka Jain
• [U-Boot] nios2-generic board is broken   Masahiro Yamada
• [U-Boot] [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot   Gupta, Pekon
• [U-Boot] [PATCH] Add lzmadec command   Patrice B
• [U-Boot] [PATCH 1/9] exynos4:pinmux:fdt: decode peripheral id   Jaehoon Chung
• [U-Boot] [PATCH] mini2440.h: Delete remainder of dead board   Masahiro Yamada
• [U-Boot] [PATCH] m68k: Remove M5271EVB and idmr board support   Masahiro Yamada
• [U-Boot] [PATCH] config: remove platform CONFIG_SYS_HZ definition part 3   Masahiro Yamada
• [U-Boot] [PATCH 4/9] drivers:mmc:sdhci: enable support for DT   Jaehoon Chung
• [U-Boot] [PATCH 9/9] board:trats2:fdt: Enable device tree on Trats2   Jaehoon Chung
• [U-Boot] [PATCH] board: nios2: Check if flash is configured before calling early_flash_cmd_reset()   Ezequiel Garcia
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Add splash screen support   Stefano Babic
• [U-Boot] Pull request: u-boot-nds32   uboot at andestech.com
• [U-Boot] [PATCH 1/9] exynos4:pinmux:fdt: decode peripheral id   Piotr Wilczek
• [U-Boot] [PATCH 4/9] drivers:mmc:sdhci: enable support for DT   Piotr Wilczek
• [U-Boot] [PATCH 9/9] board:trats2:fdt: Enable device tree on Trats2   Piotr Wilczek
• [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Piotr Wilczek
• [U-Boot] post in uboot for arm   shobin b
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Gerhard Sittig
• [U-Boot] [PATCH v7 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Gerhard Sittig
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Andreas Färber
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Gerhard Sittig
• [U-Boot] [PATCH v3] arm: exynos: change to use clrbits macro instead of readl/writel function   Gerhard Sittig
• [U-Boot] [PATCH] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] u-boot spl with fat32 on arm   Michal Simek
• [U-Boot] [PATCH v2] mx6: Enable L2 cache support   Stefano Babic
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Stefano Babic
• [U-Boot] [PATCH] pci: mx6: Implement reset callback   Stefano Babic
• [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts   Wolfgang Denk
• [U-Boot] post in uboot for arm   Wolfgang Denk
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Dirk Behme
• [U-Boot] Fwd: [ Uboot code understanding guide ]   Devarsh gadhia
• [U-Boot] eMMC boot partition booting and SMDK5250 support   Tom Rini
• [U-Boot] Fwd: [ Uboot code understanding guide ]   Robert Nelson
• [U-Boot] Illegal use of FP ops in clock_ti814x.c   Matt Porter
• [U-Boot] [PATCH] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
• [U-Boot] [PATCH] arm: Switch to -mno-unaligned-access when supported by the compiler   Måns Rullgård
• [U-Boot] [PATCH] arm: Switch to -mno-unaligned-access when supported by the compiler   Tom Rini
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] u-boot x86 on qemu   José Marinho
• [U-Boot] eMMC boot partition booting and SMDK5250 support   Tom Rini
• [U-Boot] [PATCH] pci: mx6: Implement reset callback   Marek Vasut
• [U-Boot] [uBoot 1/2] common: spl: Add spl sata boot support   Dan Murphy
• [U-Boot] [uBoot 2/2] ARM: O5/dra7xx: Add SATA boot support   Dan Murphy
• [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 3/3] powerpc/mpc85xx: SECURE BOOT- Disable law 0 for non PBL platforms   Scott Wood
• [U-Boot] [PATCH V2 1/2] pxe: support "devicetree" tag   Stephen Warren
• [U-Boot] [PATCH V2 2/2] pxe: implement fdtdir extlinux.conf tag   Stephen Warren
• [U-Boot] eMMC boot partition booting and SMDK5250 support   Tom Rini
• [U-Boot] [PATCH 0/9] Add support for the ARC700 architecture   Alexey Brodkin
• [U-Boot] [PATCH 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] [PATCH 2/9] arc: add cpu files   Alexey Brodkin
• [U-Boot] [PATCH 3/9] arc: add library functions   Alexey Brodkin
• [U-Boot] [PATCH 4/9] arc: bdinfo and image support   Alexey Brodkin
• [U-Boot] [PATCH 5/9] arc: add support for standalone programs   Alexey Brodkin
• [U-Boot] [PATCH 6/9] arc: add Arcangel4 board support   Alexey Brodkin
• [U-Boot] [PATCH 7/9] arc: add AXS101 board support   Alexey Brodkin
• [U-Boot] [PATCH 8/9] arc: add architecture to MAKEALL   Alexey Brodkin
• [U-Boot] [PATCH 9/9] arc: add README for architecture   Alexey Brodkin
• [U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high   Robert Nelson
• [U-Boot] the definition of TEXT_BASE   mingzhao
• [U-Boot] eMMC boot partition booting and SMDK5250 support   Minkyu Kang
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Tim Harvey
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v7 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH] ARM: rpi_b: set $fdtfile in default environment   Stephen Warren
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Stephen Warren
• [U-Boot] [PATCH 1/9] arc: add architecture header files   Heiko Schocher
• [U-Boot] arm post tests in uboot   shobin b
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Stefan Roese
• [U-Boot] MAKEALL   JYOTI DUBEY
• [U-Boot] MAKEALL   Anatolij Gustschin
• [U-Boot] [PATCH] fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUP   Masahiro Yamada
• [U-Boot] MAKEALL   Anatolij Gustschin
• [U-Boot] [PATCH 1/9] exynos4:pinmux:fdt: decode peripheral id   Minkyu Kang
• [U-Boot] [PATCH 1/3] exynos: pinmux: sort the list of peripherals   Minkyu Kang
• [U-Boot] [PATCH 2/3] exynos: pinmux: remove unnecessary define   Minkyu Kang
• [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Minkyu Kang
• [U-Boot] [PATCH] net/bootp: add CONFIG_BOOTP_BOOTFILE   Christian Gmeiner
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Stefano Babic
• [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support   Stefan Roese
• [U-Boot] [PATCH 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] [PATCH 1/3] exynos: pinmux: sort the list of peripherals   Rajeshwari Birje
• [U-Boot] [PATCH 3/3] exynos: pinmux: remove unnecessary routine   Rajeshwari Birje
• [U-Boot] [uBoot 2/2] ARM: O5/dra7xx: Add SATA boot support   Roger Quadros
• [U-Boot] [PATCH 1/3] exynos: pinmux: sort the list of peripherals   Rajeshwari Birje
• [U-Boot] [PATCH 1/9] arc: add architecture header files   Heiko Schocher
• [U-Boot] [uBoot 1/2] common: spl: Add spl sata boot support   Roger Quadros
• [U-Boot] [PATCH 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Andreas Färber
• [U-Boot] [PATCH] initial support for pengwyn board   Lothar Felten
• [U-Boot] [PATCH v7 0/38] Switch over to real Kbuild   Gerhard Sittig
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v8 01/38] .gitignore: ingore files generated by Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v8 02/38] Makefile.host.tmp: add a new script to refactor tools   Masahiro Yamada
• [U-Boot] [PATCH v8 03/38] tools: convert makefiles to kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v8 04/38] board: samsung: refactor host programs   Masahiro Yamada
• [U-Boot] [PATCH v8 05/38] examples: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v8 06/38] nand-spl: Use scripts/Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v8 07/38] Makfile: move suffix rules to Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH v8 08/38] Makefile: move some variable definitions to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 09/38] Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 10/38] kbuild: import Kbuild.include from linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v8 11/38] kbuild: Use Kbuild.include   Masahiro Yamada
• [U-Boot] [PATCH v8 12/38] Makefile: move more flags to the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 13/38] Makefile: refactor include path settings   Masahiro Yamada
• [U-Boot] [PATCH v8 14/38] Makefile: move more stuff to top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 15/38] Makefile: move some flags to spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 16/38] Makefile: move some flags to examples makefiles   Masahiro Yamada
• [U-Boot] [PATCH v8 17/38] kbuild: change out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v8 18/38] kbuild: add dummy obj-y to create built-in.o   Masahiro Yamada
• [U-Boot] [PATCH v8 19/38] Makefile: rename scripts/Makefile.build to scripts/Makefile.build.tmp   Masahiro Yamada
• [U-Boot] [PATCH v8 20/38] kbuild: import more build scripts from Linux v3.13 tag   Masahiro Yamada
• [U-Boot] [PATCH v8 21/38] kbuild: use Linux Kernel build scripts   Masahiro Yamada
• [U-Boot] [PATCH v8 22/38] kbuild: delete temporary build scripts   Masahiro Yamada
• [U-Boot] [PATCH v8 23/38] kbuild: move some lines to more suitable place   Masahiro Yamada
• [U-Boot] [PATCH v8 24/38] kbuild: convert some make rules to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v8 25/38] kbuild: move include directives of board configuration files   Masahiro Yamada
• [U-Boot] [PATCH v8 26/38] kbuild: generate {spl, tpl}-autoconf.mk only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH v8 27/38] Makefile: remove a cleaning target "tidy"   Masahiro Yamada
• [U-Boot] [PATCH v8 28/38] kbuild: change the top Makefile to more Kbuild-ish structure   Masahiro Yamada
• [U-Boot] [PATCH v8 29/38] examples: move api/ and standalone/ entry to examples/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 30/38] kbuild: refactor Makefile and spl/Makefile more   Masahiro Yamada
• [U-Boot] [PATCH v8 31/38] Makefile: Do not pass MTD_VERSION from the top Makefile   Masahiro Yamada
• [U-Boot] [PATCH v8 32/38] Makefile: refactor tools-all targets   Masahiro Yamada
• [U-Boot] [PATCH v8 33/38] kbuild: use scripts/Makefile.clean   Masahiro Yamada
• [U-Boot] [PATCH v8 34/38] kbuild: support simultaneous board configuration and "make all"   Masahiro Yamada
• [U-Boot] [PATCH v8 35/38] kbuild: check clean source and generate Makefile for out-of-tree build   Masahiro Yamada
• [U-Boot] [PATCH v8 36/38] board: sandburst: delete FORCEBUILD   Masahiro Yamada
• [U-Boot] [PATCH v8 37/38] kbuild: Do not generate .*.su files at the top directory   Masahiro Yamada
• [U-Boot] [PATCH v8 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC   Masahiro Yamada
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Stefano Babic
• [U-Boot] [uBoot 2/2] ARM: O5/dra7xx: Add SATA boot support   Dan Murphy
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [uBoot 1/2] common: spl: Add spl sata boot support   Dan Murphy
• [U-Boot] [PATCH] initial support for pengwyn board   Wolfgang Denk
• [U-Boot] [uBoot 1/2] common: spl: Add spl sata boot support   Roger Quadros
• [U-Boot] Pull request: u-boot-nds32   Tom Rini
• [U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high   Robert Nelson
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] "arm: keep all sections in ELF file" breaks Zynq   Michal Simek
• [U-Boot] [PATCH v3 0/2] Initial support for the silica pengwyn board   Lothar Felten
• [U-Boot] [PATCH v3 1/2] initial support for pengwyn board   Lothar Felten
• [U-Boot] [PATCH v3 2/2] cosmetics: braces, comment and whitespace formatting Signed-off-by: Lothar Felten <lothar.felten at gmail.com>   Lothar Felten
• [U-Boot] [PATCH v2 0/9] Add support for the ARC700 architecture   Alexey Brodkin
• [U-Boot] [PATCH v2 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] [PATCH v2 2/9] arc: add cpu files   Alexey Brodkin
• [U-Boot] [PATCH v2 3/9] arc: add library functions   Alexey Brodkin
• [U-Boot] [PATCH v2 4/9] arc: bdinfo and image support   Alexey Brodkin
• [U-Boot] [PATCH v2 5/9] arc: add support for standalone programs   Alexey Brodkin
• [U-Boot] [PATCH v2 6/9] arc: add Arcangel4 board support   Alexey Brodkin
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Alexey Brodkin
• [U-Boot] [PATCH v2 8/9] arc: add architecture to MAKEALL   Alexey Brodkin
• [U-Boot] [PATCH v2 9/9] arc: add README for architecture   Alexey Brodkin
• [U-Boot] [PATCH v3 1/2] initial support for pengwyn board   Tom Rini
• [U-Boot] [PATCH v3 2/2] cosmetics: braces, comment and whitespace formatting Signed-off-by: Lothar Felten <lothar.felten at gmail.com>   Tom Rini
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Tom Rini
• [U-Boot] [PATCH v3] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Stephen Warren
• [U-Boot] [PATCH v3 2/2] cosmetics: braces, comment and whitespace formatting Signed-off-by: Lothar Felten <lothar.felten at gmail.com>   Wolfgang Denk
• [U-Boot] [PATCH v3 1/2] initial support for pengwyn board   Wolfgang Denk
• [U-Boot] [PATCH v4] mx6: Enable L2 cache support   Fabio Estevam
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Andreas Färber
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Tom Rini
• [U-Boot] [PATCH v2 1/9] arc: add architecture header files   Wolfgang Denk
• [U-Boot] [PATCH v2 2/9] arc: add cpu files   Wolfgang Denk
• [U-Boot] [PATCH v2 3/9] arc: add library functions   Wolfgang Denk
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Wolfgang Denk
• [U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high   Tom Rini
• [U-Boot] [PATCH 3/3] PPC 85xx: Add qemu-ppce500 machine   York Sun
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   York Sun
• [U-Boot] [PATCH V2] disk:efi: avoid unaligned access on efi partition   Tom Rini
• [U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high   Robert Nelson
• [U-Boot] [PATCH 2/2] powerpc/t2081qds: Add T2081 QDS board support   York Sun
• [U-Boot] u-boot spl with fat32 on arm   Tom Rini
• [U-Boot] [PATCH] powerpc/T208xQDS: add mtdparts suppport   York Sun
• [U-Boot] [PATCH v2 3/9] arc: add library functions   Wolfgang Denk
• [U-Boot] [PATCH v2 2/9] arc: add cpu files   Wolfgang Denk
• [U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high   Tom Rini
• [U-Boot] [PATCH 0/6] Introducing the Broadcom bcm281xx Architecture   Tom Rini
• [U-Boot] [PATCH 1/6] arch: kona: Initial commit of kona-common architecture code   Tom Rini
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Tom Rini
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Tom Rini
• [U-Boot] [PATCH] board: nios2: Check if flash is configured before calling early_flash_cmd_reset()   Tom Rini
• [U-Boot] sandbox: Use system headers first for sandbox's os.c in a different way   Tom Rini
• [U-Boot] [PATCH] arm/da850 : [RFC] add bootdsp to cmd_elf   Tom Rini
• [U-Boot] [PATCH] powerpc/t104xrdb: Add basic ethernet support   York Sun
• [U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added   York Sun
• [U-Boot] [PATCH 0/3] Adjust and fix kernel-doc   Masahiro Yamada
• [U-Boot] [PATCH 1/3] kernel-doc: move kernel-doc tools to scripts/   Masahiro Yamada
• [U-Boot] [PATCH 2/3] kernel-doc: update kernel-doc related files to Linux v3.13   Masahiro Yamada
• [U-Boot] [PATCH 3/3] kernel-doc: fix some errors   Masahiro Yamada
• [U-Boot] "make htmldocs" gives error   Masahiro Yamada
• [U-Boot] [PATCH] powerpc/usb: Workaround for erratum-A006261   Suresh Gupta
• [U-Boot] Compilation   JYOTI DUBEY
• [U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] i2c: zynq: Support for 0-length register address   Heiko Schocher
• [U-Boot] [PATCH v2 2/2] i2c: zynq: Add support for the second i2c controller   Heiko Schocher
• [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024   Heiko Schocher
• [U-Boot] [PATCH 2/4] blackfin: add spi and i2c specific get clock functions   Heiko Schocher
• [U-Boot] [PATCH 3/4] blackfin: rename bfin-twi_i2c driver to adi_i2c   Heiko Schocher
• [U-Boot] [PATCH 4/4] blackfin: make i2c driver blackfin independant   Heiko Schocher
• [U-Boot] Porting U-boot   JYOTI DUBEY
• [U-Boot] [PATCH][v2] powerpc/t104xrdb: Add basic ethernet support   Priyanka Jain
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Pantelis Antoniou
• [U-Boot] [PATCH] ARM: bcm2835: config.mk isn't needed   Andreas Färber
• [U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added   Valentin Longchamp
• [U-Boot] u-boot spl with fat32 on arm   Michal Simek
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Michal Simek
• [U-Boot] [PATCH] arm/da850 : [RFC] add bootdsp to cmd_elf   Paul Chavent
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Tim Harvey
• [U-Boot] [PATCH] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added   Boschung, Rainer
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Michal Suchanek
• [U-Boot] [RFC PATCH 1/2] common: Add new clk command   Stefano Babic
• [U-Boot] [PATCH] net, phy: atheros ar803x bug   Heiko Schocher
• [U-Boot] [PATCH v5 1/3] cm_t335: fix linker file to produce full ELF   Albert ARIBAUD
• [U-Boot] [PATCH v5 2/3] arm: make _end compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH v5 3/3] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Add SCFG_PIXCLKCR register support for T1040   Priyanka Jain
• [U-Boot] [PATCH 2/2] powerpc/t1040qds: Add Video - HDMI support   Priyanka Jain
• [U-Boot] Link   JYOTI DUBEY
• [U-Boot] [PATCH v5 2/3] arm: make _end compiler-generated   Benoît Thébaudeau
• [U-Boot] Link   Christian Gmeiner
• [U-Boot] Porting U-boot   Michal Suchanek
• [U-Boot] [PATCH v2 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Alexey Brodkin
• [U-Boot] Commit 3865ceb7 breaks vexpress_aemv8a build with warnings   Albert ARIBAUD
• [U-Boot] Commit 3865ceb7 breaks vexpress_aemv8a build with warnings   bhupesh.sharma at freescale.com
• [U-Boot] tlb15_entry is set wrong in the 4K code when the MPC8572DS boots from nand flash   Y fan
• [U-Boot] [PATCH v2 2/9] arc: add cpu files   Alexey Brodkin
• [U-Boot] [PATCH v4] mx6: Enable L2 cache support   Dirk Behme
• [U-Boot] [PATCH v4] mx6: Enable L2 cache support   Stefano Babic
• [U-Boot] Commit 3865ceb7 breaks vexpress_aemv8a build with warnings   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added   York Sun
• [U-Boot] [PATCH] at91 gpio: fix typo in compatibility macro   Andreas Henriksson
• [U-Boot] [PATCH] powerpc/usb: Workaround for erratum-A006261   Scott Wood
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Jason Cooper
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Jason Gunthorpe
• [U-Boot] [PATCH v2 1/8] SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK   Tom Rini
• [U-Boot] [PATCH v2 2/8] omap5_uevm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Tom Rini
• [U-Boot] [PATCH v2 3/8] dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage   Tom Rini
• [U-Boot] [PATCH v2 4/8] cmd_mmc.c: Change 'bootpart' code to match normal coding style   Tom Rini
• [U-Boot] [PATCH v2 5/8] cmd_mmc.c: Rename 'bootpart' to 'bootpart-resize'   Tom Rini
• [U-Boot] [PATCH v2 6/8] cmd_mmc.c: Add 'partconf' command to mmc   Tom Rini
• [U-Boot] [PATCH v2 7/8] cmd_mmc.c: Add bootbus mmc sub-command   Tom Rini
• [U-Boot] [PATCH v2 8/8] cmd_mmc.c: Drop open/close mmc sub-commands   Tom Rini
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Andreas Bießmann
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
• [U-Boot] [PATCH 1/6] arch: kona: Initial commit of kona-common architecture code   Darwin Rambo
• [U-Boot] [PATCH v2 1/9] arc: add architecture header files   Wolfgang Denk
• [U-Boot] [PATCH] mmc: set rca to 1 for MMC cards   Stephen Warren
• [U-Boot] [PATCH 0/6] Introducing the Broadcom bcm281xx Architecture   Darwin Rambo
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Wolfgang Denk
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Tim Harvey
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Tim Harvey
• [U-Boot] [PATCH] pci: mx6: Implement reset callback   Tim Harvey
• [U-Boot] [PATCH] EXT4: Fix number base handling of "ext4write" command   Wolfgang Denk
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Masahiro Yamada
• [U-Boot] [PATCH] EXT4: Fix number base handling of "ext4write" command   Lukasz Majewski
• [U-Boot] [PATCH] EXT4: Fix number base handling of "ext4write" command   Wolfgang Denk
• [U-Boot] SD card building   JYOTI DUBEY
• [U-Boot] [PATCH] EXT4: Fix number base handling of "ext4write" command   Lukasz Majewski
• [U-Boot] [PATCH v2 0/6] PPC 85xx: Add support for QEMU's ppce500 PV machine   Alexander Graf
• [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   Alexander Graf
• [U-Boot] [PATCH v2 2/6] PPC 85xx: Add ELF entry point   Alexander Graf
• [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   Alexander Graf
• [U-Boot] [PATCH v2 4/6] PPC 85xx: Find CCSRBAR on ppce500 from device tree   Alexander Graf
• [U-Boot] [PATCH v2 5/6] PPC 85xx: Find PCI host controllers on ppce500 from device tree   Alexander Graf
• [U-Boot] [PATCH v2 6/6] PPC 85xx: Find CPU speed on ppce500 from device tree   Alexander Graf
• [U-Boot] [PATCH] EXT4: Fix number base handling of "ext4write" command   Wolfgang Denk
• [U-Boot] Question about Patch submission   Hannes Petermaier
• [U-Boot] [PATCH 0/6] usb:samsung: Exynos4 SoC USB code improvements   Lukasz Majewski
• [U-Boot] [PATCH 1/6] usb:gadget:ums: Replace malloc calls with memalign to fix cache buffer alignment   Lukasz Majewski
• [U-Boot] [PATCH 2/6] usb:udc:samsung: Remove redundant cache operation from Samsung UDC driver   Lukasz Majewski
• [U-Boot] [PATCH 3/6] usb:udc:samsung: Allow burst transfers for non EP0 endpints   Lukasz Majewski
• [U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver   Lukasz Majewski
• [U-Boot] [PATCH 5/6] usb:gadget:f_thor: Allocate request up to THOR_PACKET_SIZE not ep->maxpacket   Lukasz Majewski
• [U-Boot] [PATCH 6/6] usb:gadget:f_thor: cosmetic: Remove debug memset   Lukasz Majewski
• [U-Boot] [PATCH v3 3/9] kmp204x: I2C deblocking support   Valentin Longchamp
• [U-Boot] SD card building   Michal Suchanek
• [U-Boot] Question about Patch submission   Wolfgang Denk
• [U-Boot] SD card building   Michal Suchanek
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Tom Rini
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Alexey Brodkin
• [U-Boot] [PATCH v2 1/9] arc: add architecture header files   Alexey Brodkin
• [U-Boot] recommended action for bootloaders regarding modifying device-tree nodes   Jason Cooper
• [U-Boot] [PATCH v4 0/1] Initial support for Silica Pengwyn board   Lothar Felten
• [U-Boot] [PATCH v4 1/1] Initial support for Silica Pengwyn board   Lothar Felten
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Tim Kryger
• [U-Boot] [PATCH] tools: correct proftool build rule   Ian Campbell
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Tom Rini
• [U-Boot] [PATCH v3 3/9] kmp204x: I2C deblocking support   York Sun
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Matt Porter
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Wolfgang Denk
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Tom Rini
• [U-Boot] [PATCH v2 3/6] PPC 85xx: Add qemu-ppce500 machine   York Sun
• [U-Boot] [PATCH v2 1/6] PPC 85xx: Detect e500v2 / e500mc during runtime   York Sun
• [U-Boot] [PATCH 6/6] board: bcm28155_ap: Add board files   Darwin Rambo
• [U-Boot] [PATCH 2/6] arch: bcm281xx: Initial commit of bcm281xx architecture code   Darwin Rambo
• [U-Boot] [PATCH v2 7/9] arc: add AXS101 board support   Alexey Brodkin
• [U-Boot] [PATCH 0/6] Introducing the Broadcom bcm281xx Architecture   Tom Rini
• [U-Boot] [PATCH] fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUP   Simon Glass
• [U-Boot] [PATCH 1/3] kernel-doc: move kernel-doc tools to scripts/   Simon Glass
• [U-Boot] [PATCH 2/3] kernel-doc: update kernel-doc related files to Linux v3.13   Simon Glass
• [U-Boot] [PATCH 3/3] kernel-doc: fix some errors   Simon Glass
• [U-Boot] [PATCH] dts: re-write dts/Makefile more simply with Kbuild   Simon Glass
• [U-Boot] [PATCH v8 0/38] Switch over to real Kbuild   Simon Glass
• [U-Boot] [PATCH] tools: correct proftool build rule   Simon Glass
• [U-Boot] u-boot x86 on qemu   Simon Glass
• [U-Boot] [PATCH] Add lzmadec command   Simon Glass
• [U-Boot] arm post tests in uboot   Simon Glass
• [U-Boot] [WIP PATCH] dts: Generate binaries for all relevant platforms   Simon Glass
• [U-Boot] [PATCH V3 02/12] fs: implement infra-structure for an 'exists' function   Simon Glass
• [U-Boot] [PATCH V3 03/12] fs: don't pass NULL dev_desc to most filesystems   Simon Glass