[U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040

[qiang.zhao at freescale.com]

Timur Tabi wrote:



> -----Original Message-----
> From: Timur Tabi [mailto:timur at tabi.org]
> Sent: Sunday, January 26, 2014 12:37 PM
> To: Zhao Qiang-B45475
> Cc: U-Boot Mailing List; Xu Jiucheng-B37781; Xie Xiaobo-R63061
> Subject: Re: [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040
> 
> qiang.zhao at freescale.com wrote:
> > Other boards have either Fman or QE, So CONFIG_SYS_QE_FMAN_FW_ADDR can
> > be used either Fman or QE.
> >
> > But T1040QDS have both Fman and QE.
> 
> Does the T1040QDS have microcode for both Fman and QE?  Normally, QE
> microcode is not needed.
> 

T1040QDS has microcode for Fman and another microcode for QE.
The two microcodes is different.

QE microcode is needed.

Regards,
Zhao Qiang