[U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high

[Robert Nelson]

> Well, we have per-platform fixups in the tree today.  However this now
> means that only u-boot is going to provide a correct and fully
> functional tree for those revs, which isn't good imho for the
> beagleboard community use cases of older u-boots / distro support /
> non-u-boot bootloader support, so it'd probably be best to have per rev
> DTs and update findfdt to use the right one.

Thanks Tom,

The thing is, usb has been broken on the xMA/B's ever since we first
setup findfdt to use the omap3-beagle-xm.dtb.  Although the usb ehci
port was finally fixed in v3.13-rcX, so nobody really noticed these
pre-xMC's where broken in the first place.

That's why I thought it made more sense to fix it in u-boot, as we
then get mainline v3.13.x working out of the box for free. (if the
distro upgrades u-boot) Otherwise all distro's need to carry a kernel
patch for v3.13/v3.14 adding a new omap3-beagle-xm-ab.dtb variant.

I can go either way, as i've been pushing out images with the *-ab.dtb
/ *-c.dtb variants running v3.12/v3.13 to the beagleboard community.
But while updating my base image to v2014.01, i thought pushing it to
u-boot might be better in the long run.

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/