[U-Boot] [RFC] [PATCH] omap3_beagle: fdt: xMA/B set hsusb2_power_reg active-high

[Tom Rini]

On Wed, Jan 29, 2014 at 08:51:27AM -0600, Robert Nelson wrote:
> On Tue, Jan 28, 2014 at 5:31 PM, Robert Nelson <robertcnelson at gmail.com> wrote:
> > With the xM revision C, the DC control of the usb hub was inverted.
> >
> > By adding the enable-active-high property to hsusb2_power_reg, mainline omap3-beagle-xm.dtb
> > will now activiate properly activate the usb hub on older xMA/B varients.
> >
> > Signed-off-by: Robert Nelson <robertcnelson at gmail.com>
> > CC: Tom Rini <trini at ti.com>
> > ---
> >  include/configs/omap3_beagle.h | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
> > index c58bc91..d7d63ce 100644
> > --- a/include/configs/omap3_beagle.h
> > +++ b/include/configs/omap3_beagle.h
> > @@ -249,6 +249,9 @@
> >                         "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
> >                 "if test $fdtfile = undefined; then " \
> >                         "echo WARNING: Could not determine device tree to use; fi; \0" \
> > +       "fixfdt=" \
> > +               "if test $beaglerev = xMAB; then " \
> > +                       "fdt addr ${fdtaddr}; fdt resize; fdt set /hsusb2_power_reg enable-active-high; fi; \0" \
> >         "bootenv=uEnv.txt\0" \
> >         "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
> >         "importbootenv=echo Importing environment from mmc ...; " \
> > @@ -308,6 +311,7 @@
> >         "setenv bootfile zImage;" \
> >         "if run loadimage; then " \
> >                 "run loadfdt;" \
> > +               "run fixfdt;" \
> >                 "run mmcbootz; " \
> >         "fi; " \
> >
> > --
> > 1.8.5.3
> 
> I've listed this as an RFC, as i'm not sure if there is a generic way
> we should be doing device tree fixup's in u-boot.
> 
> I have thought about splitting omap3-beagle-xm.dtb into two variants
> "ab" and "c" with just a simple one line delta:
> 
> https://github.com/RobertCNelson/armv7-multiplatform/blob/v3.13.x/patches/omap3_beagle_xm_rework/0002-ARM-dts-omap3-beagle-xm-ab-usb-host-is-active-high-t.patch
> 
> But it's just so trivial to just fix it in u-boot instead.
> 
> Thoughts?

Well, we have per-platform fixups in the tree today.  However this now
means that only u-boot is going to provide a correct and fully
functional tree for those revs, which isn't good imho for the
beagleboard community use cases of older u-boots / distro support /
non-u-boot bootloader support, so it'd probably be best to have per rev
DTs and update findfdt to use the right one.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140129/4af09353/attachment.pgp>