[U-Boot] [PATCH 02/10] ARM: IXP: Remove actux2 board
Marek Vasut
marex at denx.de
Tue Jan 28 00:30:32 CET 2014
The board is unmaintained, just like the rest of the IXP.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Michael Schwingen <michael at schwingen.org>
Cc: Tom Rini <trini at ti.com>
---
board/actux2/Makefile | 8 --
board/actux2/actux2.c | 122 ----------------------------
board/actux2/actux2_hw.h | 43 ----------
board/actux2/u-boot.lds | 99 -----------------------
boards.cfg | 1 -
include/configs/actux2.h | 206 -----------------------------------------------
6 files changed, 479 deletions(-)
delete mode 100644 board/actux2/Makefile
delete mode 100644 board/actux2/actux2.c
delete mode 100644 board/actux2/actux2_hw.h
delete mode 100644 board/actux2/u-boot.lds
delete mode 100644 include/configs/actux2.h
diff --git a/board/actux2/Makefile b/board/actux2/Makefile
deleted file mode 100644
index 24cbff1..0000000
--- a/board/actux2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := actux2.o
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
deleted file mode 100644
index e578cd0..0000000
--- a/board/actux2/actux2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael at schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr at denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-
-#include <miiphy.h>
-
-#include "actux2_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* CS1: IPAC-X */
- writel(0x94d10013, IXP425_EXP_CS1);
- /* CS5: Debug port */
- writel(0x9d520003, IXP425_EXP_CS5);
- /* CS6: HW release register */
- writel(0x81860001, IXP425_EXP_CS6);
- /* CS7: LEDs */
- writel(0x80900003, IXP425_EXP_CS7);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD);
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST);
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD);
-
- /* Setup GPIOs for Interrupt inputs */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT);
-
- /* Setup GPIOs for 33MHz clock output */
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- writel(0x011001FF, IXP425_GPIO_GPCLKR);
-
- udelay(533);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST);
-
- ACTUX2_LED1(1);
- ACTUX2_LED2(0);
- ACTUX2_LED3(0);
- ACTUX2_LED4(0);
-
- return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts("Board: AcTux-2 rev.");
- putc(ACTUX2_BOARDREL + 'A' - 1);
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
- return 0;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = reserved
- * 1 = Rev. A
- * 2 = Rev. B
- *************************************************************************/
-u32 get_board_rev(void)
-{
- return ACTUX2_BOARDREL;
-}
-
-void reset_phy(void)
-{
- /* init IcPlus IP175C ethernet switch to native IP175C mode */
- miiphy_write("NPE0", 29, 31, 0x175C);
-}
diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h
deleted file mode 100644
index 57c6fa7..0000000
--- a/board/actux2/actux2_hw.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael at schwingen.org
- *
- * hardware register definitions for the AcTux-2 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ACTUX2_HW_H
-#define _ACTUX2_HW_H
-
-/* 0 = LED off,1 = green, 2 = red, 3 = orange */
-#define ACTUX2_LED1(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
-#define ACTUX2_LED2(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
-#define ACTUX2_LED3(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
-#define ACTUX2_LED4(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
-
-#define ACTUX2_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS
-#define ACTUX2_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
-#define ACTUX2_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_DBGINT 0
-#define CONFIG_SYS_GPIO_ETHINT 1
-#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */
-#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */
-#define CONFIG_SYS_GPIO_UNUSED4 4
-#define CONFIG_SYS_GPIO_UNUSED5 5
-#define CONFIG_SYS_GPIO_DSR 6 /* Out */
-#define CONFIG_SYS_GPIO_DCD 7 /* Out */
-#define CONFIG_SYS_GPIO_IPAC_INT 8
-#define CONFIG_SYS_GPIO_DBGJUMPER 9
-#define CONFIG_SYS_GPIO_BUTTON1 10
-#define CONFIG_SYS_GPIO_DBGSENSE 11
-#define CONFIG_SYS_GPIO_DTR 12
-#define CONFIG_SYS_GPIO_IORST 13 /* Out */
-#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
-#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
-
-#endif
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
deleted file mode 100644
index f00d7c7..0000000
--- a/board/actux2/u-boot.lds
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
-OUTPUT_ARCH (arm)
-ENTRY (_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN (4);
- .text : {
- *(.__image_copy_start)
- arch/arm/cpu/ixp/start.o(.text*)
- net/built-in.o(.text*)
- board/actux2/built-in.o(.text*)
- arch/arm/cpu/ixp/built-in.o(.text*)
- drivers/input/built-in.o(.text*)
-
- . = env_offset;
- common/env_embedded.o(.ppcenv)
- *(.text*)
- }
-
- . = ALIGN(4);
- .rodata : {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- . = ALIGN(4);
- .data : {
- *(.data*)
- }
- . = ALIGN(4);
- .got : {
- *(.got)
- }
- . =.;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- . = ALIGN (4);
-
- .image_copy_end :
- {
- *(.__image_copy_end)
- }
-
- .rel_dyn_start :
- {
- *(.__rel_dyn_start)
- }
-
- .rel.dyn : {
- *(.rel*)
- }
-
- .rel_dyn_end :
- {
- *(.__rel_dyn_end)
- }
-
- _end = .;
-
-/*
- * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
- * __bss_base and __bss_limit are for linker only (overlay ordering)
- */
-
- .bss_start __rel_dyn_start (OVERLAY) : {
- KEEP(*(.__bss_start));
- __bss_base = .;
- }
-
- .bss __bss_base (OVERLAY) : {
- *(.bss*)
- . = ALIGN(4);
- __bss_limit = .;
- }
- .bss_end __bss_limit (OVERLAY) : {
- KEEP(*(.__bss_end));
- }
-
- .dynsym _end : { *(.dynsym) }
- .dynbss : { *(.dynbss) }
- .dynstr : { *(.dynstr*) }
- .dynamic : { *(.dynamic*) }
- .hash : { *(.hash*) }
- .plt : { *(.plt*) }
- .interp : { *(.interp*) }
- .gnu : { *(.gnu*) }
- .ARM.exidx : { *(.ARM.exidx*) }
-}
diff --git a/boards.cfg b/boards.cfg
index b3faeb4..d3ebb4f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -377,7 +377,6 @@ Active arm armv7:arm720t tegra20 toradex colibri_t20_iris
Active arm armv7:arm720t tegra30 avionic-design tec-ng tec-ng - Alban Bedel <alban.bedel at avionic-design.de>
Active arm armv7:arm720t tegra30 nvidia beaver beaver - Tom Warren <twarren at nvidia.com>:Stephen Warren <swarren at nvidia.com>
Active arm armv7:arm720t tegra30 nvidia cardhu cardhu - Tom Warren <twarren at nvidia.com>
-Active arm ixp - - - actux2 - Michael Schwingen <michael at schwingen.org>
Active arm ixp - - - actux3 - Michael Schwingen <michael at schwingen.org>
Active arm ixp - - - actux4 - Michael Schwingen <michael at schwingen.org>
Active arm ixp - - - dvlhost - Michael Schwingen <michael at schwingen.org>
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
deleted file mode 100644
index f0cbff7..0000000
--- a/include/configs/actux2.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael at schwingen.org
- *
- * Configuration settings for the AcTux-2 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX2 1
-
-#define CONFIG_MACH_TYPE 1480
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_PCI
-#undef CONFIG_PCI
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113042
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG 0x3A
-#define PHYS_SDRAM_1_SIZE 0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE 0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 140
-#define PHYS_FLASH_1 0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0x00
-/* MII PHY management */
-#define CONFIG_MII 1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK 1
-#define CONFIG_MII_NPE0_SPEED 100
-#define CONFIG_MII_NPE0_FULLDUPLEX 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=actux2/uImage\0" \
- "rootfile=actux2/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux2/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
--
1.8.5.2
More information about the U-Boot
mailing list