[U-Boot] [PATCH V2 13/13] ARM: tegra: fix "bootp" issue for Tegra124 too

[Jim Lin]

On Fri, 2014-01-24 at 08:43 +0800, Stephen Warren wrote:
> From: Jim Lin <jilin at nvidia.com>
> 
> Fix the timeout issue after running "bootp" command in U-Boot console.
> 
> TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a
> controller reset and before RUN bit is se, (per technical reference
> manual.

Stephen,
Could you help to replace "," with "t" and put right parenthesis?
Like

controller reset and before RUN bit is set (per technical reference
manual).

Thanks,

--nvpublic