[U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot

Artem Bityutskiy artem.bityutskiy at linux.intel.com
Thu Jan 16 08:19:19 CET 2014


On Wed, 2014-01-15 at 21:29 +0000, Gupta, Pekon wrote:
> Hi Artem,
> 
> >From: Artem Bityutskiy [mailto:artem.bityutskiy at linux.intel.com]
> <snip>
> >Conclusion: all UBIFS needs is a way to ask the driver - is this NAND
> >page blank or not? UBIFS does not really has to compare to all 0xFFs.
> >
> Thanks for details. Yes, I understand the concept in general that you
> want to recover last bit of user-data written on NAND (without corruption).
> 
> Now, as NAND driver itself does differentiation between and erased-page
> v/s programmed-page. Can we use different error codes to pass this
> information to upper layers like;

I thought the ECC is something which could be used to differentiate.


> *For MTD layer*
> 0: data valid, length of data is determined by 'read_len'  (currently)
> -EUCLEAN: correctable bit-flips found, data is valid
> -EBADMSG: un-correctable bit-flips, data *may-be* invalid.
> -ENODATA: detected erased-page. *Actual* data determined by read_len.
> -ENOMSG:  detected erased-page with bit-flips. *Actual* data determined by read_len.

Not sure this is a good idea. If NAND driver cannot do the
differentiation, then it should not be done by the MTD layer, I think.

Then just improve UBI and UBIFS and make the function which compares
buffers with all 0xFFs allow for bit-flips. We know the maximum possible
bit-flips per min. I/O unit, right? Just allow for that amount.

-- 
Best Regards,
Artem Bityutskiy



More information about the U-Boot mailing list