[U-Boot] [PATCH] mx6: Revert "mx6: soc: Disable VDDPU regulator"

[Pierre AUBERT]

Le 16/01/2014 17:01, Fabio Estevam a écrit :
> On Thu, Jan 16, 2014 at 1:50 PM, Otavio Salvador
> <otavio at ossystems.com.br> wrote:
>
>>> It worked for you probably because you used the ldo bypass mode.
>>
>> Yes; I did the bypass mode.
> We currently don't do LDO bypass mode in mainline U-boot. We do it in
> FSL U-boot.
>
> With LDO bypass, lower VDDARM and VDDSOC voltages can be supplied as
> per the mx6 datasheet.
>
> I just measured with the scope and the VDDARM/SOC voltages supplied by
> the 3.10 FSL kernel are below the minimum for the LDO enabled case. So
> setting LDO bypass in U-boot 'fixes' the issue.
>
> We can implement LDO bypass after 2014.01 is out, but for this release
> let's just revert the VDDPU disable patch.
>
> Do you agree?
+1
>
> Regards,
>
> Fabio Estevam