[U-Boot] [PATCH 2/7 V5] mmc: Get secure erase information from card

[Pantelis Antoniou]

Hi Haijun,

Since this is part of the core mmc functionality, I'll
need to run some test on some board that are affected.

Pending verification and testing from now on.

Regards

-- Pantelis

On Dec 30, 2013, at 10:20 AM, Haijun Zhang wrote:

> Read command class from csd register and secure erase
> support bit from ext csd register. Also calculate the erase
> timeout and secure erase timeout.
> 
> If read ext csd error, error status should be returned instead of
> giving some incorrect information.
> 
> Error log:
> =>
> => mmcinfo
> Device: FSL_SDHC
> Manufacturer ID: 0
> OEM: 0
> Name: Tran Speed: 0
> Rd Block Len: 0
> MMC version 0.0
> High Capacity: No
> Capacity: 0 Bytes
> Bus Width: 1-bit
> =>
> 
> Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
> ---
> changes for V5:
> 	- Exclude the judgement of EXT_CSD_REV in case of read EXT_CSD err
> 
> drivers/mmc/mmc.c | 54 +++++++++++++++++++++++++++++++++++++++---------------
> 1 file changed, 39 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index e1461a9..da06990 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -871,6 +871,8 @@ static int mmc_startup(struct mmc *mmc)
> 		}
> 	}
> 
> +	mmc->cmdclass = (cmd.response[1] >> 20) & 0xfff;
> +
> 	/* divide frequency by 10, since the mults are 10x bigger */
> 	freq = fbase[(cmd.response[0] & 0x7)];
> 	mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
> @@ -925,8 +927,10 @@ static int mmc_startup(struct mmc *mmc)
> 	mmc->part_config = MMCPART_NOAVAILABLE;
> 	if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
> 		/* check  ext_csd version and capacity */
> -		err = mmc_send_ext_csd(mmc, ext_csd);
> -		if (!err && (ext_csd[EXT_CSD_REV] >= 2)) {
> +		if (mmc_send_ext_csd(mmc, ext_csd))
> +			return COMM_ERR;
> +
> +		if (ext_csd[EXT_CSD_REV] >= 2) {
> 			/*
> 			 * According to the JEDEC Standard, the value of
> 			 * ext_csd's capacity is valid if the value is more
> @@ -960,6 +964,39 @@ static int mmc_startup(struct mmc *mmc)
> 		}
> 
> 		/*
> +		 * The granularity of the erasable units is the Erase Group:The
> +		 * smallest number of consecutive write blocks which can be
> +		 * addressed for erase. The size of the Erase Group is card
> +		 * specific and stored in the CSD when ERASE_GROUP_DEF is
> +		 * disabled, and in the EXT_CSD when ERASE_GROUP_DEF is
> +		 * enabled.
> +		 */
> +		if (ext_csd[EXT_CSD_ERASE_GROUP_DEF]) {
> +			mmc->erase_grp_size =
> +				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
> +
> +			mmc->erase_timeout_mult = 300 *
> +				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
> +		} else {
> +			/* Calculate the group size from the csd value. */
> +			int erase_gsz, erase_gmul;
> +			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
> +			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
> +			mmc->erase_grp_size = (erase_gsz + 1)
> +				* (erase_gmul + 1);
> +		}
> +
> +		if (ext_csd[EXT_CSD_REV] >= 4) {
> +			mmc->sec_feature_support =
> +				ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
> +			mmc->sec_erase_mult =
> +				ext_csd[EXT_CSD_SEC_ERASE_MULT];
> +			mmc->sec_erase_timeout = 300 *
> +				ext_csd[EXT_CSD_SEC_ERASE_MULT] *
> +				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
> +		}
> +
> +		/*
> 		 * Host needs to enable ERASE_GRP_DEF bit if device is
> 		 * partitioned. This bit will be lost every time after a reset
> 		 * or power off. This will affect erase size.
> @@ -971,20 +1008,7 @@ static int mmc_startup(struct mmc *mmc)
> 
> 			if (err)
> 				return err;
> -
> -			/* Read out group size from ext_csd */
> -			mmc->erase_grp_size =
> -				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
> -					MMC_MAX_BLOCK_LEN * 1024;
> -		} else {
> -			/* Calculate the group size from the csd value. */
> -			int erase_gsz, erase_gmul;
> -			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
> -			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
> -			mmc->erase_grp_size = (erase_gsz + 1)
> -				* (erase_gmul + 1);
> 		}
> -
> 		/* store the partition info of emmc */
> 		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
> 		    ext_csd[EXT_CSD_BOOT_MULT])
> -- 
> 1.8.4.1
> 
>