[U-Boot] [PATCH 7/8] smdk5420: Correct the vbus gpio configuration for USB controller
Vivek Gautam
gautamvivek1987 at gmail.com
Tue Jan 7 07:37:46 CET 2014
Hi Marek,
On Mon, Jan 6, 2014 at 9:22 PM, Marek Vasut <marex at denx.de> wrote:
> On Monday, January 06, 2014 at 10:29:42 AM, Vivek Gautam wrote:
>> On smdk5420 two availbale XHCI controllers require VBUS GPIO
>> to be configured, the EHCI however doesn't have any such VBUS
>> GPIO. So correcting the available board_usb_vbus_init() function
>> to the needs.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
>> ---
>> board/samsung/smdk5420/smdk5420.c | 11 ++++++-----
>> 1 file changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/board/samsung/smdk5420/smdk5420.c
>> b/board/samsung/smdk5420/smdk5420.c index 3ad2ad0..4f23000 100644
>> --- a/board/samsung/smdk5420/smdk5420.c
>> +++ b/board/samsung/smdk5420/smdk5420.c
>> @@ -18,14 +18,15 @@
>>
>> DECLARE_GLOBAL_DATA_PTR;
>>
>> -#ifdef CONFIG_USB_EHCI_EXYNOS
>> +#ifdef CONFIG_USB_XHCI_EXYNOS
>> static int board_usb_vbus_init(void)
>> {
>> - struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
>> - samsung_get_base_gpio_part1();
>> + struct exynos5420_gpio_part4 *gpio4 = (struct exynos5420_gpio_part4 *)
>> + samsung_get_base_gpio_part4();
>>
>> /* Enable VBUS power switch */
>> - s5p_gpio_direction_output(&gpio1->x2, 6, 1);
>> + s5p_gpio_direction_output(&gpio4->g0, 5, 1);
>> + s5p_gpio_direction_output(&gpio4->g1, 4, 1);
>
> This VBUS toggling should happen on per-port basis, right ?
No this VBUS gpio toggling is actually enabling the VBUS line of the controller.
And since we have 2 controllers on exynos5420, so added the required 2
gpios for the purpose
(GPG0[5], and GPG1[4]).
>
> Best regards,
> Marek Vasut
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
More information about the U-Boot
mailing list