[U-Boot] Pull request: u-boot-arm/master - UPDATED

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Jan 16 10:47:18 CET 2014


Hello Tom,

This is an update which replaces the previous PR which had only imx
stuff.

The following changes since commit
6ba2bc8fa9be4bd09ec43e39cb8e666480ef010c:

  arm: use canonical sub mnemonic (2014-01-14 12:38:47 +0100)

are available in the git repository at:

  git://git.denx.de/u-boot-arm master

for you to fetch changes up to c71b4dd2da0dcddabd7c29e6c3dc8a495d4bd928:

  arm: koelsch: Add support QSPI device and enable boot from SPI flash
  (2014-01-16 08:07:20 +0900)

----------------------------------------------------------------
Albert ARIBAUD (1):
      Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

Fabio Estevam (2):
      mx6: clock: Pass the frequency as argument of
enable_fec_anatop_clock() mx6: Add initial support for the Hummingboard
solo

Nobuhiro Iwamatsu (6):
      arm: koelsch: Disable TMU0 before OS boot
      arm: lager: Disable TMU0 before OS boot
      arm: rmobile: Add SH QSPI base register address
      spi: sh_qspi: Add header file that defines the address of
registers arm: lager: Add support QSPI device and enable boot from SPI
flash arm: koelsch: Add support QSPI device and enable boot from SPI
flash

 arch/arm/cpu/armv7/mx6/clock.c                     |   8 +-
 arch/arm/include/asm/arch-mx6/clock.h              |   9 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |   4 +
 arch/arm/include/asm/arch-rmobile/r8a7790.h        |   1 +
 arch/arm/include/asm/arch-rmobile/r8a7791.h        |   1 +
 board/freescale/mx6slevk/mx6slevk.c                |   2 +-
 board/renesas/koelsch/koelsch.c                    |   6 +
 board/renesas/lager/lager.c                        |   6 +
 board/solidrun/hummingboard/Makefile               |   9 +
 board/solidrun/hummingboard/README                 |  40 ++++
 board/solidrun/hummingboard/hummingboard.c         | 187
 +++++++++++++++++ board/solidrun/hummingboard/solo.cfg
 |  25 +++ board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg   |  74
 +++++++ board/solidrun/mx6-microsom/clocks.cfg             |  33 +++
 .../mx6-microsom/ddr-800mhz-32bit-setup.cfg        |  76 +++++++
 boards.cfg                                         |   1 +
 drivers/spi/sh_qspi.c                              |   3 +-
 include/configs/hummingboard.h                     | 226
 +++++++++++++++++++++
 include/configs/koelsch.h                          |  32 ++-
 include/configs/lager.h                            |  33 ++- 20 files
 changed, 764 insertions(+), 12 deletions(-) create mode 100644
 board/solidrun/hummingboard/Makefile create mode 100644
 board/solidrun/hummingboard/README create mode 100644
 board/solidrun/hummingboard/hummingboard.c create mode 100644
 board/solidrun/hummingboard/solo.cfg create mode 100644
 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg create mode 100644
 board/solidrun/mx6-microsom/clocks.cfg create mode 100644
 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg create mode
 100644 include/configs/hummingboard.h

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list