[U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo

[Stefano Babic]

Hi Fbio, hi Joe,

On 13/01/2014 11:41, Stefano Babic wrote:
> Hi Fabio,
> 
> On 13/01/2014 00:04, Fabio Estevam wrote:
>> Hi Stefano,
>>
>> On Fri, Jan 3, 2014 at 3:55 PM, Fabio Estevam <festevam at gmail.com> wrote:
>>> From: Fabio Estevam <fabio.estevam at freescale.com>
>>>
>>> SolidRun has designed the Hummingboard board based on mx6q/dl/solo.
>>>
>>> Add the initial support for the mx6 solo variant.
>>>
>>> More information about this hardware can be found at:
>>> http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
>>>
>>> (Carrier-One was the previous name of Hummingboard).
>>>
>>> Based on the work from Jon Nettleton <jon.nettleton at gmail.com>.
>>>
>>> Signed-off-by: Jon Nettleton <jon.nettleton at gmail.com>
>>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>>> ---
>>> Changes since v1:
>>> - Addressed many of Stefano's comments about v1
>>
>> Please let me know if you are happy with v2.
>>
> 
> I have not open issue with your patch - it looks great to me.
> 

I discussed last week via IIRC with Otavio about if the patch can still
flow into the coming release. He pointed me out that the original patch
was sent a lot of time ago as "carrier-one":

http://patchwork.ozlabs.org/patch/288017/

I could then consider your patch as a resubmit of the original patch and
push it to -master, it does not matter if the subject was changed. The
patch itself is not dangerous at all for other boards, so we are running
on the safest way.

However, it makes sense only if patch3/3 will be applied by Joe in the
current release.

	http://patchwork.ozlabs.org/patch/306640/

Joe, do you plan to apply it for this release or is it already deferred
to -next  ?

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================