[U-Boot] [PATCH v5 00/30] zynq: More boards support

[Jagannadha Sutradharudu Teki]

These changes are from u-boot-xlnx.git repo from git.xilinx.com
and in addition of basic fdt support. This repo is well tested
on xilinx zynq platform, hence pushing the same on upstream.

Excluded qspi and nand changes from previous series.

--
Thanks,
Jagan.

Changes for v5:
	- rebase to u-boot-arm/master
	- Enabled CONFIG_DEFAULT_DEVICE_TREE in pre-board config files.
	- Updated build steps on doc/README.zynq
Changes for v4:
        - rebase to master
        - Removed CONFIG_SYS_NO_FLASH in zynq-common.h
Changes for v3:
        - Removed CONFIG_ZYNQ_QSPI
        - Removed CONFIG_NAND_ZYNQ
        - Removed CONFIG_SYS_PROMPT_HUSH_PS2
        - Documented bootmode detection code
        - Added comments

Jagannadha Sutradharudu Teki (30):
  zynq: Enable CONFIG_FIT_VERBOSE
  zynq: Enable Boot FreeBSD/vxWorks
  zynq: Cleanup on miscellaneous configs
  zynq: Cleanup on memory configs
  zynq: Minor config cleanup
  zynq: Enable cache options
  zynq: Add UART0, UART1 configs support
  zynq: Add GEM0, GEM1 configs support
  zynq-common: Rename zynq with zynq-common
  doc: zynq: Add information on zynq u-boot
  zynq: Add zynq zc70x board support
  zynq: Add zynq zed board support
  zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
  zynq-common: Define exact TEXT_BASE
  zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
  zynq: Add zynq microzed board support
  zynq: Add zynq_zc770 xm010 board support
  zynq: Add zynq_zc770 xm013 board support
  zynq: Add zynq_zc770 xm012 board support
  zynq: Add support to find bootmode
  zynq-common: Define default environment
  zynq-common: Change Env. Sector size to 128Kb
  zynq-common: Define flash env. partition
  zynq-common: Define CONFIG_ENV_OVERWRITE
  dts: zynq: Add basic fdt support
  gpio: zynq: Add dummy gpio routines
  zynq-common: Enable verified boot(RSA)
  dts: zynq: Add more zynq dts files
  zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
  doc: Update the zynq u-boot status

 arch/arm/cpu/armv7/zynq/slcr.c             |   6 +
 arch/arm/dts/zynq-7000.dtsi                |  13 ++
 arch/arm/include/asm/arch-zynq/gpio.h      |  25 +++
 arch/arm/include/asm/arch-zynq/sys_proto.h |   1 +
 board/xilinx/dts/zynq-microzed.dts         |  14 ++
 board/xilinx/dts/zynq-zc702.dts            |  14 ++
 board/xilinx/dts/zynq-zc706.dts            |  14 ++
 board/xilinx/dts/zynq-zc770-xm010.dts      |  14 ++
 board/xilinx/dts/zynq-zc770-xm012.dts      |  14 ++
 board/xilinx/dts/zynq-zc770-xm013.dts      |  14 ++
 board/xilinx/dts/zynq-zed.dts              |  14 ++
 board/xilinx/zynq/board.c                  |  25 +++
 boards.cfg                                 |   8 +-
 doc/README.zynq                            |  94 ++++++++++++
 include/configs/zynq-common.h              | 238 +++++++++++++++++++++++++++++
 include/configs/zynq.h                     | 139 -----------------
 include/configs/zynq_microzed.h            |  26 ++++
 include/configs/zynq_zc70x.h               |  29 ++++
 include/configs/zynq_zc770.h               |  42 +++++
 include/configs/zynq_zed.h                 |  27 ++++
 20 files changed, 630 insertions(+), 141 deletions(-)
 create mode 100644 arch/arm/dts/zynq-7000.dtsi
 create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
 create mode 100644 board/xilinx/dts/zynq-microzed.dts
 create mode 100644 board/xilinx/dts/zynq-zc702.dts
 create mode 100644 board/xilinx/dts/zynq-zc706.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
 create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
 create mode 100644 board/xilinx/dts/zynq-zed.dts
 create mode 100644 doc/README.zynq
 create mode 100644 include/configs/zynq-common.h
 delete mode 100644 include/configs/zynq.h
 create mode 100644 include/configs/zynq_microzed.h
 create mode 100644 include/configs/zynq_zc70x.h
 create mode 100644 include/configs/zynq_zc770.h
 create mode 100644 include/configs/zynq_zed.h

-- 
1.8.3