[U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL

[Prabhakar Kushwaha]

On 1/14/2014 6:39 AM, Scott Wood wrote:
> On Mon, 2014-01-13 at 11:58 +0530, Prabhakar Kushwaha wrote:
>> On 1/10/2014 7:40 AM, Po Liu wrote:
>>> diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
>>> index 9de327b..6b43496 100644
>>> --- a/drivers/mtd/nand/fsl_ifc_spl.c
>>> +++ b/drivers/mtd/nand/fsl_ifc_spl.c
>>> @@ -88,7 +88,11 @@ static inline int bad_block(uchar *marker, int port_size)
>>>    		return __raw_readw((u16 *)marker) != 0xffff;
>>>    }
>>>    
>>> -static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
>>> +#ifdef CONFIG_TPL_BUILD
>>> +int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
>>> +#else
>>> +static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
>>> +#endif
>> nand_load definition is
>>       static void nand_load(unsigned int offs, int uboot_size, uchar *dst);
> Not anymore...

Just confused with previous fsl_ifc_spl.c file.    Actually this patch 
is changing nand_load signature.

No warning. I checked for BSC9131RDB, P1010 NAND target.

Thanks,
Prabhakar