[U-Boot] [PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected

[Andy Ng]

The ENET_REF_CLK has to loopback: the patch was produced from u-boot 2013-10


diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 7851eb1..9c18847 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -1047,7 +1047,7 @@ MX6_PAD_DECL(GPIO_1__USDHC1_CD            , 0x05E0,
0x0210, 6, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_1__SRC_TESTER_ACK            , 0x05E0, 0x0210, 7,
0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__ESAI1_TX3_RX2            , 0x05E4, 0x0214, 0,
0x0850, 1, 0)
 MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN      , 0x05E4, 0x0214, 1,
0x0000, 0, 0)
-MX6_PAD_DECL(GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT     , 0x05E4, 0x0214,
2, 0x080C, 0, 0)
+MX6_PAD_DECL(GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT     , 0x05E4, 0x0214, 2
| IOMUX_CONFIG_SION, 0x080C, 0, 0)
 MX6_PAD_DECL(GPIO_16__USDHC1_LCTL              , 0x05E4, 0x0214, 3,
0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__SPDIF_IN1                , 0x05E4, 0x0214, 4,
0x08F0, 2, 0)
 MX6_PAD_DECL(GPIO_16__GPIO_7_11                , 0x05E4, 0x0214, 5,
0x0000, 0, 0)