[U-Boot] [PATCH v5 12/30] zynq: Add zynq zed board support

[Jagannadha Sutradharudu Teki]

Zed is a complete development board based on the
Xilinx Zynq-7000 All Programmable SoC.

APSOC:
- XC7Z020-CLG484-1
Memory:
- 512 MB DDR3
- 256 Mb Quad-SPI Flash(
- Full size SD/MMC card cage
Connectivity:
- 10/100/1000 Ethernet
- USB OTG (Device/Host/OTG)
- USB-UART
Expansion:
- FMC (Low Pin Count)
- Pmod. headers (2x6)
Video/Display:
- HDMI output (1080p60 + audio)
- VGA connector
- 128 x 32 OLED
- User LEDs (9)
User inputs:
- Slide switches (8)
- Push button switches (7)
Audio:
- 24-bit stereo audio CODEC
- Stereo line in/out
- Headphone
- Microphone input
Analog:
- Xilinx XADC header
- Supports 4 analog inputs
- 2 Differential / 4 Single-ended
Debug:
- On-board USB JTAG programming port
- ARM Debug Access Port (DAP)

For more info - http://zedboard.org/product/zedboard

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
 boards.cfg                 |  1 +
 include/configs/zynq_zed.h | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)
 create mode 100644 include/configs/zynq_zed.h

diff --git a/boards.cfg b/boards.cfg
index cc536c3..c38ceb1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -359,6 +359,7 @@ Active  arm         armv7          u8500       st-ericsson     snowball
 Active  arm         armv7          u8500       st-ericsson     u8500               u8500_href                           -                                                                                                                                 -
 Active  arm         armv7          vf610       freescale       vf610twr            vf610twr                             vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg                                                                         Alison Wang <b18965 at freescale.com>
 Active  arm	    armv7	   zynq	       xilinx	       zynq	   	   zynq_zc70x				-                                                                                                                                 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
+Active  arm	    armv7	   zynq	       xilinx	       zynq	   	   zynq_zed				-                                                                                                                                 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
 Active  arm         armv7:arm720t  tegra114    nvidia          dalmore             dalmore                              -                                                                                                                                 Tom Warren <twarren at nvidia.com>
 Active  arm         armv7:arm720t  tegra20     avionic-design  medcom-wide         medcom-wide                          -                                                                                                                                 Alban Bedel <alban.bedel at avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     avionic-design  plutux              plutux                               -                                                                                                                                 Alban Bedel <alban.bedel at avionic-design.de>
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
new file mode 100644
index 0000000..278db1e
--- /dev/null
+++ b/include/configs/zynq_zed.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Zynq Evaluation and Development Board - ZedBoard
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZED_H
+#define __CONFIG_ZYNQ_ZED_H
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0	0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZED_H */
-- 
1.8.3