[U-Boot] [PATCH] nitrogen6x: README: Only calling 'make' is enough

[Eric Nelson]

Thanks Fabio,

On 01/24/2014 04:15 AM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> No need to pass 'u-boot.imx' as parameter for 'make' because u-boot.imx is
> built by default.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>   board/boundary/nitrogen6x/README | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
> index 5049093..6f449be 100644
> --- a/board/boundary/nitrogen6x/README
> +++ b/board/boundary/nitrogen6x/README
> @@ -67,7 +67,7 @@ override auto-detection and force activation of the specified panel.
>   To build U-Boot for one of the Nitrogen6x or SabreLite board:
>
>   	make nitrogen6x_config
> -	make u-boot.imx
> +	make
>
>   Note that 'nitrogen6x' is a placeholder. The complete list of supported
>   board configurations is shown in tha MAINTAINERS file:
>

Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>