[U-Boot] [PATCH][v2] powerpc/t1040qds: Update DDR initialization related settings
York Sun
yorksun at freescale.com
Thu Jan 2 23:07:20 CET 2014
On 12/16/2013 09:42 PM, Priyanka Jain wrote:
> Update following DDR related settings for T1040QDS
> -Correct number of chip selects to two as t1040qds supports
> two Chip selects.
> -Update board_specific_parameters udimm structure with settings
> derived via calibration.
> -Reduced I2C speed to 50KHz as DDR-SPD does not get reliably
> read at 400KHz.
>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> Changes for v2:
> Reduced I2C speed to 50KHz.
>
> board/freescale/t1040qds/ddr.h | 22 ++++++++++++----------
> include/configs/T1040QDS.h | 6 +++---
> 2 files changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h
> index 8ee206e..afa72af 100644
> --- a/board/freescale/t1040qds/ddr.h
> +++ b/board/freescale/t1040qds/ddr.h
> @@ -31,16 +31,18 @@ static const struct board_specific_parameters udimm0[] = {
> * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
> * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
> */
> - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
> - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
> - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
> - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
> - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
> - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
> - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
> - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
> - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
> - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
> + {2, 833, 4, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0},
> + {2, 833, 0, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0},
> + {2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0},
> + {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0},
> + {2, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0},
> + {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0},
> + {1, 833, 4, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0},
> + {1, 833, 0, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0},
> + {1, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0},
> + {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0},
> + {1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0},
> + {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0},
> {}
> };
Looks you are updating timing for all speeds. Can you add to commit message
about what DIMMs and speeds have you tested?
York
More information about the U-Boot
mailing list