[U-Boot] [PATCH v4 2/2] mx6: Distinguish mx6dual from mx6quad

Stefano Babic sbabic at denx.de
Sun Jan 26 23:39:19 CET 2014


Hi Fabio,

On 26/01/2014 18:06, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> Currently when we boot a mx6dual U-boot reports that it is a mx6quad.
>
> Report it as MX6D instead:
>
> CPU:   Freescale i.MX6D rev1.2 at 792 MHz
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v3:
> - Fix From field
> Changes since v2:
> - use a common cpu.h header
>
>   arch/arm/cpu/armv7/mx6/soc.c        | 14 +++++++++++---
>   arch/arm/imx-common/cpu.c           |  2 ++
>   arch/arm/include/asm/arch-imx/cpu.h |  1 +
>   3 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 0208cba..9acd8c9 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -41,14 +41,19 @@ u32 get_cpu_rev(void)
>
>   	if (type != MXC_CPU_MX6SL) {
>   		reg = readl(&anatop->digprog);
> +		struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
> +		u32 cfg = readl(&scu->config) & 3;
>   		type = ((reg >> 16) & 0xff);
>   		if (type == MXC_CPU_MX6DL) {
> -			struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
> -			u32 cfg = readl(&scu->config) & 3;
> -
>   			if (!cfg)
>   				type = MXC_CPU_MX6SOLO;
>   		}
> +
> +		if (type == MXC_CPU_MX6Q) {
> +			if (cfg == 1)
> +				type = MXC_CPU_MX6D;
> +		}
> +
>   	}
>   	reg &= 0xff;		/* mx6 silicon revision */
>   	return (type << 12) | (reg + 0x10);
> @@ -62,6 +67,9 @@ u32 __weak get_board_rev(void)
>   	if (type == MXC_CPU_MX6SOLO)
>   		cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
>
> +	if (type == MXC_CPU_MX6D)
> +		cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF);
> +
>   	return cpurev;
>   }
>   #endif
> diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
> index 9231649..a77c4de 100644
> --- a/arch/arm/imx-common/cpu.c
> +++ b/arch/arm/imx-common/cpu.c
> @@ -106,6 +106,8 @@ const char *get_imx_type(u32 imxtype)
>   	switch (imxtype) {
>   	case MXC_CPU_MX6Q:
>   		return "6Q";	/* Quad-core version of the mx6 */
> +	case MXC_CPU_MX6D:
> +		return "6D";	/* Dual-core version of the mx6 */
>   	case MXC_CPU_MX6DL:
>   		return "6DL";	/* Dual Lite version of the mx6 */
>   	case MXC_CPU_MX6SOLO:
> diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
> index 8c725e2..a35940e 100644
> --- a/arch/arm/include/asm/arch-imx/cpu.h
> +++ b/arch/arm/include/asm/arch-imx/cpu.h
> @@ -10,3 +10,4 @@
>   #define MXC_CPU_MX6DL		0x61
>   #define MXC_CPU_MX6SOLO		0x62
>   #define MXC_CPU_MX6Q		0x63
> +#define MXC_CPU_MX6D		0x64
>

Acked-by: Stefano babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list