[U-Boot] [PATCH v2 6/9] kmp204x: update I2C field of RCW

[Valentin Longchamp]

On the previous HW revision (now unsupported), there was a need for
external DMA signals and thus the I2C3/4 signals were used
DMA1_DONE/ACK/REQ.

These signals now are configured as GPIO[16:19].

Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
---

Changes in v2: None

 board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg
index f2b7fe3..2d4c48c 100644
--- a/board/keymile/kmp204x/rcw_kmp204x.cfg
+++ b/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -7,5 +7,5 @@ aa55aa55 010e0100
 #64 bytes RCW data
 14600000 00000000 28200000 00000000
 148E70CF CFC02000 58000000 41000000
-00000000 00000000 00000000 F4428002
+00000000 00000000 00000000 F0428002
 00000000 00000000 00000000 00000000
-- 
1.8.0.1